{"title":"NEW EBAY","description":null,"products":[{"product_id":"victron-venus-gx-system-monitoring","title":"Victron Venus GX System Monitoring","description":"\u003cp\u003eThe Victron Venus GX is a communication centre and system monitoring device that connects and coordinates all Victron products within an energy system — enabling centralised monitoring, control, and remote access via the free Victron Remote Management (VRM) portal. Designed for marine, RV, off-grid, and ESS installations, it provides real-time visibility of battery state of charge, power consumption, solar harvest, generator status, tank levels, and temperature from any internet-connected device worldwide.\u003c\/p\u003e\n\u003cp\u003eThe Venus GX connects to Victron inverters, inverter\/chargers, MPPT solar charge controllers, battery monitors, and other VE.Direct, VE.Bus, and VE.Can devices — allowing all system data to be read, logged, and managed from a single hub. When connected to the internet via Ethernet or WiFi, all data is transmitted continuously to the VRM portal. When no internet connection is available, the Venus GX stores data internally for up to 48 hours — with a MicroSD card or USB stick extending local storage for offline analysis via the VictronConnect app.\u003c\/p\u003e\n\u003cp\u003eThree resistive tank level inputs accept European (0–180 Ohm) or US (240–30 Ohm) tank senders, displaying fuel, water, and waste tank levels alongside power system data. Two temperature sense inputs accept the Victron temperature sensor (ASS000001000) for battery or ambient temperature monitoring. A programmable relay enables automated generator start\/stop based on low voltage, battery state of charge, or high demand — with configurable quiet time windows to prevent nuisance starts at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The Venus GX is deprecated. Victron Energy recommends the Cerbo GX for all new installations — offering a significantly more powerful processor, more communication ports, GX Touch display compatibility, and greater device capacity at a comparable price point.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/I1P9xhHmld4?si=QukgooSkSQzg5_bp\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eCentralised System Monitoring and Control\u003c\/h4\u003e\n\u003cp\u003eConnects to all VE.Direct, VE.Bus, and VE.Can Victron devices — including MultiPlus and Quattro inverter\/chargers, BlueSolar and SmartSolar MPPT charge controllers, BMV battery monitors, Lynx Shunt VE.Can, and Skylla-i chargers — providing a single monitoring and control hub for the entire system.\u003c\/p\u003e\n\u003ch4\u003eVRM Remote Monitoring Portal\u003c\/h4\u003e\n\u003cp\u003eWhen connected to the internet via Ethernet or WiFi, all system data is transmitted continuously to the free Victron VRM portal — enabling remote monitoring, alarm management, settings access, and historical data analysis from any internet-connected smartphone, tablet, or computer anywhere in the world.\u003c\/p\u003e\n\u003ch4\u003eOffline Data Storage — 48 Hours Internal, Extended via MicroSD\/USB\u003c\/h4\u003e\n\u003cp\u003eWhen no internet connection is available, the Venus GX stores data internally for up to 48 hours. Inserting a MicroSD card or USB stick extends local storage capacity indefinitely — with stored files uploadable to VRM when connectivity is restored or analysable offline via the VictronConnect app.\u003c\/p\u003e\n\u003ch4\u003eResistive Tank Level Inputs\u003c\/h4\u003e\n\u003cp\u003eThree resistive tank level inputs accept European (0–180 Ohm) or US (240–30 Ohm) tank senders — or a custom resistance range between 0 and 300 Ohm — displaying fuel, water, and waste tank levels alongside energy system data on the VRM portal and any connected displays.\u003c\/p\u003e\n\u003ch4\u003eTemperature Sense Inputs\u003c\/h4\u003e\n\u003cp\u003eTwo temperature sense inputs accept the Victron temperature sensor (ASS000001000) for monitoring battery or ambient temperature — with temperature data displayed on VRM and available for temperature-triggered alarms and relay functions.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Relay — Automatic Generator Start\/Stop\u003c\/h4\u003e\n\u003cp\u003eA programmable relay enables automated generator start and stop based on configurable triggers including low battery voltage, state of charge threshold, and high load demand — with adjustable quiet time periods to prevent unwanted starts during sleep or quiet hours.\u003c\/p\u003e\n\u003ch4\u003eModbus-TCP Gateway\u003c\/h4\u003e\n\u003cp\u003eThe Venus GX acts as a Modbus-TCP gateway for all connected Victron products — enabling integration with third-party building management systems, SCADA platforms, and industrial control systems that support the Modbus TCP protocol.\u003c\/p\u003e\n\u003ch4\u003eDeprecated — Cerbo GX Recommended for New Installations\u003c\/h4\u003e\n\u003cp\u003eThe Venus GX is deprecated. Victron Energy recommends the Cerbo GX for all new installations, offering a more powerful processor, more VE.Direct ports, GX Touch display compatibility, BMS-Can port, tank and temperature inputs, and greater overall device capacity at a comparable price.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable style=\"width: 100.036%; height: 274.4px;\" class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003e8 - 70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 39.2px;\"\u003eCommunication Ports\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 39.2px;\"\u003e3 × VE.Direct | 1 × VE.Bus (2 × RJ45) | 1 × VE.Can | Ethernet | WiFi | 1 × USB-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eTank Level Inputs\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003e3 × resistive (0–180 Ohm EU \/ 240-30 Ohm US \/ custom)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 39.2px;\"\u003eTemperature Sense Inputs\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 39.2px;\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eProgrammable Relay\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003e1 × NO\/NC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eOffline Data Storage\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003e48 hours internal | Extended via MicroSD or USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003e−20°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eProduct Status\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003eDeprecated - Cerbo GX recommended for new installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 26.2902%; height: 19.6px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd style=\"width: 71.2499%; height: 19.6px;\"\u003e45 × 143 × 96 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Venus-GX-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Venus_GX\/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119787131129,"sku":"IVV50228","price":178.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50228-1.webp?v=1779679536"},{"product_id":"victron-ve-bus-smart-dongle","title":"Victron VE Bus Smart Dongle","description":"\u003cp\u003eThe Victron VE.Bus Smart Dongle (ASS030537010) is a compact Bluetooth accessory that adds wireless monitoring, remote control, and battery sensing capability to any Victron inverter or inverter\/charger with a VE.Bus port. Two products in one, it serves simultaneously as a Bluetooth interface to the VictronConnect app and as a voltage and temperature sense device for the connected inverter\/charger — making it the ideal monitoring and control solution for smaller systems in caravans, motorhomes, and small yachts where a full GX device is not required.\u003c\/p\u003e\n\u003cp\u003eOnce connected to a Multi, MultiPlus, MultiPlus-II, MultiGrid, MultiGrid-II, Quattro, or Phoenix Inverter via a standard UTP RJ45 cable (not included), the VE.Bus Smart Dongle enables the VictronConnect app on iOS and Android to monitor all key inverter\/charger parameters — including AC and DC voltage, current, frequency, state, active alarms, and warnings — and to control the device remotely: switching between On, Off, and Charger-Only modes and adjusting the AC input current limit. Instant Readout displays the inverter\/charger's key data directly in the VictronConnect device list without requiring an active Bluetooth connection.\u003c\/p\u003e\n\u003cp\u003eThe dongle also functions as a battery voltage and temperature sensor, supplying accurate battery terminal voltage and temperature data to the connected inverter\/charger for improved charge voltage compensation. By default it uses its onboard temperature sensor — which accurately measures battery temperature when the dongle is mounted directly on the battery case using the included adhesive mount. An optional external temperature sensor (ASS000100000) can be connected instead for even more accurate battery terminal temperature measurement. Both voltage and temperature data are shared across VE.Smart Networking with connected Victron Smart solar chargers for coordinated temperature-compensated charging.\u003c\/p\u003e\n\u003cp\u003eThe dongle can be used in systems with or without a GX device. When a GX device is present on the VE.Bus, it takes priority over the dongle for system control — the dongle will continue to provide monitoring and sensing but will not transmit voltage and temperature data if the GX device already supplies this from another source such as a CANbus battery.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eBluetooth Remote Control via VictronConnect App\u003c\/h4\u003e\n\u003cp\u003eEnables remote on\/off\/charger-only switching and AC input current limit adjustment of the connected inverter\/charger via the VictronConnect app on iOS and Android — providing convenient operational control from a smartphone without requiring physical access to the inverter\/charger panel.\u003c\/p\u003e\n\u003ch4\u003eReal-Time Inverter\/Charger Monitoring\u003c\/h4\u003e\n\u003cp\u003eLive AC and DC parameters — including input and output voltage, current, frequency, power, battery voltage, device state, active alarms, warnings, and error codes — are displayed in the VictronConnect app, with Instant Readout showing key data on the device list page without requiring an active Bluetooth connection.\u003c\/p\u003e\n\u003ch4\u003eBattery Voltage and Temperature Sensing\u003c\/h4\u003e\n\u003cp\u003eSupplies accurate battery terminal voltage and temperature data to the connected inverter\/charger, enabling temperature-compensated charge voltage adjustment and improved absorption and float accuracy — particularly valuable for MultiPlus-II systems where the dongle is the only way to add on-battery sensing when no GX device or CANbus battery is present.\u003c\/p\u003e\n\u003ch4\u003eVE.Smart Networking — Shared Sensing Data\u003c\/h4\u003e\n\u003cp\u003eBattery voltage and temperature data measured by the dongle is shared wirelessly via VE.Smart Networking with connected Victron SmartSolar MPPT solar charge controllers, enabling coordinated temperature-compensated charging across all devices in the system without individual sensor connections at each charger.\u003c\/p\u003e\n\u003ch4\u003eInstant Readout — At-a-Glance System Status\u003c\/h4\u003e\n\u003cp\u003eKey inverter\/charger data — including warnings, alarms, and errors — is displayed directly in the VictronConnect device list page without requiring a full Bluetooth connection to the dongle, enabling rapid at-a-glance diagnostics of the system from any location within Bluetooth range.\u003c\/p\u003e\n\u003ch4\u003eCompatible with Parallel and Three-Phase Systems\u003c\/h4\u003e\n\u003cp\u003eA single VE.Bus Smart Dongle can be connected to a single inverter\/charger or to multiple inverter\/chargers configured in parallel or three-phase — providing full system monitoring and control capability for multi-unit installations without requiring one dongle per unit.\u003c\/p\u003e\n\u003ch4\u003eInternal and External Temperature Sensing\u003c\/h4\u003e\n\u003cp\u003eThe default installation uses the dongle's onboard temperature sensor, which measures battery temperature accurately when the dongle is mounted on the battery case using the included adhesive mount. For improved accuracy, the optional external battery-terminal temperature sensor (ASS000100000) can be connected — overriding the internal sensor and providing direct terminal-level temperature measurement.\u003c\/p\u003e\n\u003ch4\u003eSuitable for Use With or Without a GX Device\u003c\/h4\u003e\n\u003cp\u003eThe VE.Bus Smart Dongle can operate in both GX-device and non-GX-device systems. In systems with a GX device, the dongle continues to provide Bluetooth monitoring and sensing while the GX device manages system control. In systems without a GX device, the dongle provides full standalone monitoring, control, and sensing capability via VictronConnect.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/QaaDNiFwBXs?si=VJtU9OB-K4Tk2-9I\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage Range\u003c\/td\u003e\n\u003ctd\u003e8-70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw @ 12V (BLE not connected, not VE.Smart)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 6 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw @ 12V (BLE not connected, VE.Smart active)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 9 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw @ 12V (BLE connected, not VE.Smart)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 7 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Inverters \/ Chargers\u003c\/td\u003e\n\u003ctd\u003eMulti, MultiPlus, MultiPlus-II, MultiGrid, MultiGrid-II, Quattro, Phoenix Inverter (VE.Bus)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Bus Connection\u003c\/td\u003e\n\u003ctd\u003eRJ45 (UTP cable required - not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e−20°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003eMax. 95% (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08 kg (approx.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/VE.Bus_Smart_Dongle\/106441-VE_Bus_Smart_Dongle-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119788474617,"sku":"IVV50240","price":93.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50240-1.webp?v=1779242787"},{"product_id":"victron-cerbo-gx-mk2","title":"Victron Cerbo GX MK2","description":"\u003cp\u003eThe Victron Cerbo GX MK2 is a central communication and monitoring device designed to provide complete control and visibility over Victron energy systems. Suitable for marine, RV, off-grid, and industrial applications, it connects multiple system components into one integrated platform for simplified monitoring and management.\u003c\/p\u003e\n\u003cp\u003eThe Cerbo GX MK2 allows users to monitor battery status, power consumption, solar harvest, generator input, shore power, tank levels, and temperature measurements in real time. It also enables advanced system control functions such as generator auto start\/stop and shore power input current limits, helping improve overall system efficiency and operational reliability.\u003c\/p\u003e\n\u003cp\u003eDesigned for flexible integration, the Cerbo GX MK2 supports a wide range of Victron products and compatible third-party devices. It features multiple VE.Direct ports, USB connections, Ethernet, HDMI, Bluetooth, and WiFi connectivity, enabling seamless communication across complex energy installations. The built-in WiFi Access Point and LAN connectivity also provide reliable local access when internet connectivity is unavailable.\u003c\/p\u003e\n\u003cp\u003eWhen paired with the GX Touch 50 or GX Touch 70 displays, the Cerbo GX MK2 delivers a clean and responsive touchscreen interface for direct system interaction. The displays are available in multiple mounting options to suit different installation requirements, while the single-cable connection simplifies installation and reduces wiring complexity.\u003c\/p\u003e\n\u003cp\u003eRemote access and monitoring are available through the Victron Remote Management (VRM) portal and the VictronConnect app, allowing users and installers to monitor system performance, configure settings, and review historical data from virtually anywhere.\u003c\/p\u003e\n\u003cp\u003eCompact and highly capable, the Cerbo GX MK2 provides an efficient and scalable solution for advanced energy system monitoring, communication, and control across a wide range of applications.\u003c\/p\u003e\n\u003cp\u003eCerbo GX MK2 is the new model of Cerbo GX. It is almost identical to the previous model and has improvements in its VE.Can ports, USB ports and pulse counting.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/3wheKaU2_qw?si=0JGuuglczs3CDakq\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eAdvanced System Monitoring\u003c\/h4\u003e\n\u003cp\u003eThe Cerbo GX provides real-time monitoring of your entire energy system, including battery state of charge, power consumption, solar yield, generator input, and mains supply. All data is displayed in a clear and organized interface, giving you complete system visibility at a glance.\u003c\/p\u003e\n\u003ch4\u003eRemote Access via VRM Portal\u003c\/h4\u003e\n\u003cp\u003eWith integrated connectivity, the Cerbo GX allows remote monitoring and control through the Victron Remote Management (VRM) portal. Users can access system performance, adjust settings, and review historical data from anywhere in the world using a web browser or mobile device.\u003c\/p\u003e\n\u003ch4\u003eFlexible Connectivity Options\u003c\/h4\u003e\n\u003cp\u003eEquipped with Ethernet, WiFi, and Bluetooth, the Cerbo GX ensures seamless communication between connected devices. It also includes multiple ports such as HDMI, USB, and VE.Direct, enabling easy integration with a wide range of Victron components.\u003c\/p\u003e\n\u003ch4\u003eGX Touch Display Integration\u003c\/h4\u003e\n\u003cp\u003eThe Cerbo GX works seamlessly with GX Touch displays, providing a responsive touchscreen interface for direct system control. A single cable connection simplifies installation and reduces wiring complexity.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Generator Control\u003c\/h4\u003e\n\u003cp\u003eThe system supports programmable generator start and stop functions based on battery levels, load conditions, or time schedules. This ensures efficient power management and helps maintain system reliability.\u003c\/p\u003e\n\u003ch4\u003eCustom Alerts and Notifications\u003c\/h4\u003e\n\u003cp\u003eUsers can configure alerts for critical system parameters such as low battery, high temperature, or power issues. Notifications help ensure quick response to potential problems and improve system safety.\u003c\/p\u003e\n\u003ch4\u003eTank and Temperature Monitoring\u003c\/h4\u003e\n\u003cp\u003eThe Cerbo GX supports multiple tank level and temperature inputs, allowing users to monitor additional system parameters such as fuel, water, or environmental conditions in real time.\u003c\/p\u003e\n\u003ch4\u003eEasy Installation and Configuration\u003c\/h4\u003e\n\u003cp\u003eDesigned for flexibility, the Cerbo GX supports wall or DIN rail mounting and features a straightforward setup process. Its compact design makes it suitable for marine, RV, and off-grid applications.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e8–70V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003eApprox. 2.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall or DIN rail (35mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Direct ports\u003c\/td\u003e\n\u003ctd\u003e3 (up to 15 devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Bus\u003c\/td\u003e\n\u003ctd\u003e1x VE.Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB ports\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI output\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelays\u003c\/td\u003e\n\u003ctd\u003e2 x NO\/NC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e6.1\"L x 3.1\"W x 1.9\"H, 1.1 Lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Cerbo-GX-GX-Touch-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Cerbo_GX\/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf#page=12\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119788671225,"sku":"IVV50224","price":272.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50224-1.webp?v=1778067165"},{"product_id":"victron-gx-touch-50","title":"Victron GX Touch 50","description":"\u003cp\u003eThe Victron GX Touch 50 is a compact 5-inch touchscreen display designed for seamless integration with the Cerbo GX, providing convenient monitoring and control of Victron energy systems through a simple and user-friendly interface. It is ideal for marine, RV, and off-grid applications where reliable system visibility and easy operation are essential.\u003c\/p\u003e\n\u003cp\u003eThe GX Touch 50 connects to the Cerbo GX with a single cable connection, helping simplify installation and reduce cable clutter. Its responsive touchscreen interface allows users to easily monitor important system information such as battery state of charge, power consumption, solar power harvest, tank levels, temperature readings, and other connected system data in real time.\u003c\/p\u003e\n\u003cp\u003eAvailable in both standard wall\/top mount and flush mount versions, the GX Touch 50 offers flexible installation options to suit different layouts and installation requirements. The slim and modern design provides a clean appearance while maintaining easy access to essential controls and monitoring functions.\u003c\/p\u003e\n\u003cp\u003eWhen paired with the Cerbo GX and Victron Remote Management (VRM), the GX Touch 50 enables efficient local and remote system monitoring for complete energy management convenience. Its compact size makes it especially suitable for installations where space is limited without sacrificing functionality.\u003c\/p\u003e\n\u003cp\u003eBuilt for dependable everyday performance, the GX Touch 50 is a practical and efficient display solution for advanced Victron energy systems.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3wheKaU2_qw?si=0JGuuglczs3CDakq\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003e5-Inch Touchscreen Display\u003c\/h4\u003e\n\u003cp\u003eThe Victron GX Touch 50 features a compact 5-inch touchscreen interface that provides clear and convenient access to Victron energy system monitoring and control functions.\u003c\/p\u003e\n\u003ch4\u003eSimple Single-Cable Connection\u003c\/h4\u003e\n\u003cp\u003eDesigned for seamless integration with the Cerbo GX, the display connects using a single cable, simplifying installation and reducing wiring complexity.\u003c\/p\u003e\n\u003ch4\u003eReal-Time System Monitoring\u003c\/h4\u003e\n\u003cp\u003eMonitor essential system information including battery status, power consumption, solar production, tank levels, temperature readings, and power sources directly from the display.\u003c\/p\u003e\n\u003ch4\u003eResponsive User Interface\u003c\/h4\u003e\n\u003cp\u003eThe intuitive touchscreen interface allows fast navigation through settings, system data, and connected device controls for efficient day-to-day operation.\u003c\/p\u003e\n\u003ch4\u003eFlexible Mounting Options\u003c\/h4\u003e\n\u003cp\u003eAvailable in both standard wall\/top mount and flush mount versions, the Victron GX Touch 50 can be adapted to different installation environments and panel layouts.\u003c\/p\u003e\n\u003ch4\u003eCompact and Modern Design\u003c\/h4\u003e\n\u003cp\u003eWith its slim profile and space-saving design, the GX Touch 50 provides a clean installation finish suitable for marine, RV, and off-grid applications.\u003c\/p\u003e\n\u003ch4\u003eRemote Monitoring Compatibility\u003c\/h4\u003e\n\u003cp\u003eWhen paired with the Cerbo GX and the Victron Remote Management (VRM) platform, users can monitor and manage their energy system remotely from virtually anywhere.\u003c\/p\u003e\n\u003ch4\u003eWide System Compatibility\u003c\/h4\u003e\n\u003cp\u003eThe Victron GX Touch 50 is compatible with Victron GX communication devices, enabling centralized monitoring and control of connected Victron energy products.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Size\u003c\/td\u003e\n\u003ctd\u003e5 inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay resolution\u003c\/td\u003e\n\u003ctd\u003e800 x 480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eMounting With included mounting accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e2 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter dimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e5.05\" W × 3.43\" H × 0.49\" D, 0.4 Lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Cerbo-GX-GX-Touch-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Cerbo_GX\/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf#page=15\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119788900601,"sku":"IVV50226","price":220.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50226-1.jpg?v=1781800538"},{"product_id":"victron-gx-touch-70","title":"Victron GX Touch 70","description":"\u003cp\u003eThe Victron GX Touch 70 is a 7-inch touchscreen display designed to work seamlessly with the Cerbo GX, providing convenient monitoring and control of Victron energy systems through a clean and intuitive interface. Ideal for marine, RV, and off-grid applications, it delivers real-time system information in a compact and easy-to-use format.\u003c\/p\u003e\n\u003cp\u003eDesigned for simple installation, the GX Touch 70 connects to the Cerbo GX using a single cable, reducing wiring complexity while enabling fast setup. The large touchscreen display allows users to easily view battery status, power consumption, solar harvest, tank levels, temperature measurements, and other essential system data directly from one central screen.\u003c\/p\u003e\n\u003cp\u003eAvailable in both standard wall\/top mount and flush mount versions, the GX Touch 70 offers flexible installation options to suit different environments and panel layouts. Its slim profile and modern design create a clean, professional appearance while maintaining practical accessibility.\u003c\/p\u003e\n\u003cp\u003eThe display provides smooth interaction with connected Victron devices and supports quick access to system settings and monitoring functions. Combined with the Cerbo GX and Victron Remote Management (VRM), users can efficiently manage and monitor their energy system locally or remotely.\u003c\/p\u003e\n\u003cp\u003eBuilt for reliability and everyday usability, the GX Touch 70 is an ideal display solution for advanced Victron power and energy management systems.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3wheKaU2_qw?si=0JGuuglczs3CDakq\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003e7-Inch Touchscreen Display\u003c\/h4\u003e\n\u003cp\u003eThe Victron GX Touch 70 features a large 7-inch touchscreen interface that provides clear and convenient access to Victron energy system monitoring and control functions.\u003c\/p\u003e\n\u003ch4\u003eSimple Single-Cable Connection\u003c\/h4\u003e\n\u003cp\u003eDesigned for seamless integration with the Cerbo GX, the display connects using a single cable, simplifying installation and reducing wiring complexity.\u003c\/p\u003e\n\u003ch4\u003eReal-Time System Monitoring\u003c\/h4\u003e\n\u003cp\u003eMonitor essential system information including battery status, power consumption, solar production, tank levels, temperature readings, and power sources directly from the display.\u003c\/p\u003e\n\u003ch4\u003eResponsive User Interface\u003c\/h4\u003e\n\u003cp\u003eThe intuitive touchscreen interface allows fast navigation through settings, system data, and connected device controls for efficient day-to-day operation.\u003c\/p\u003e\n\u003ch4\u003eFlexible Mounting Options\u003c\/h4\u003e\n\u003cp\u003eAvailable in both standard wall\/top mount and flush mount versions, the Victron GX Touch 70 can be adapted to different installation environments and panel layouts.\u003c\/p\u003e\n\u003ch4\u003eClean and Modern Design\u003c\/h4\u003e\n\u003cp\u003eWith its slim profile and professional appearance, the Victron GX Touch 70 provides a clean installation finish suitable for marine, RV, and off-grid applications.\u003c\/p\u003e\n\u003ch4\u003eRemote Monitoring Compatibility\u003c\/h4\u003e\n\u003cp\u003eWhen paired with the Cerbo GX and the Victron Remote Management (VRM) platform, users can monitor and manage their energy system remotely from virtually anywhere.\u003c\/p\u003e\n\u003ch4\u003eWide System Compatibility\u003c\/h4\u003e\n\u003cp\u003eThe Victron GX Touch 70 is compatible with Victron GX communication devices, enabling centralized monitoring and control of connected Victron energy products.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Size\u003c\/td\u003e\n\u003ctd\u003e7 inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay resolution\u003c\/td\u003e\n\u003ctd\u003e1024 x 600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eMounting With included mounting accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e6'\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter dimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e7\"L x 4.5\"W x 0.6\"H, 0.25 Lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Cerbo-GX-GX-Touch-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Cerbo_GX\/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf#page=15\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119789293817,"sku":"IVV50227","price":323.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50227-1.webp?v=1781797945"},{"product_id":"victron-cerbo-s-gx","title":"Victron Cerbo-S GX","description":"\u003cp\u003e\u003cstrong\u003eVictron Energy Cerbo-S GX has been discontinued and replaced by \u003ca title=\"Victron Energy Cerbo GX MK2\" href=\"https:\/\/emarineinc.com\/products\/victron-cerbo-gx-mk2\"\u003eVictron Energy Cerbo GX MK2\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Victron Cerbo-S GX is a streamlined communication and monitoring device designed to provide centralized control over Victron energy systems. Suitable for marine, RV, and off-grid applications, it connects key system components into a single integrated platform for simple and efficient system management.\u003c\/p\u003e\n\u003cp\u003eThe Cerbo-S GX enables real-time monitoring of important system parameters including battery status, power consumption, solar production, and input sources. It also supports essential system control functions, helping users optimize performance and maintain reliable operation across a variety of energy installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for dependable integration, the Cerbo-S GX supports a wide range of Victron devices through VE.Direct and VE.Bus connections, along with USB and Ethernet interfaces. Compared to the full Cerbo GX, the Cerbo-S GX offers a more simplified hardware configuration — it does \u003cstrong\u003enot\u003c\/strong\u003e include BMS-Can port, resistive tank level inputs, or temperature sense inputs.\u003c\/p\u003e\n\u003cp\u003eWhen paired with the GX Touch 50 or GX Touch 70 displays, the Cerbo-S GX delivers a clean and responsive touchscreen interface for direct system monitoring and control. Remote access and monitoring are available through the Victron Remote Management (VRM) portal and the VictronConnect app.\u003c\/p\u003e\n\u003cp\u003eCompact and efficient, the Cerbo-S GX is a practical solution for users who require reliable system monitoring and control without the expanded connectivity features of the full Cerbo GX.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eReal-Time System Monitoring\u003c\/h4\u003e\n\u003cp\u003eClear visibility of key system data including battery levels, power consumption, and solar generation for better energy management decisions.\u003c\/p\u003e\n\u003ch4\u003eRemote Access via VRM Portal\u003c\/h4\u003e\n\u003cp\u003eMonitor and manage your system remotely through the Victron Remote Management (VRM) portal using any web browser or mobile device.\u003c\/p\u003e\n\u003ch4\u003eEssential Connectivity\u003c\/h4\u003e\n\u003cp\u003eIncludes 3x VE.Direct, 1x VE.Bus, 3x USB, Ethernet, WiFi, and Bluetooth connections for stable communication with a wide range of Victron components.\u003c\/p\u003e\n\u003ch4\u003eGX Touch Display Compatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with GX Touch 50 and GX Touch 70 displays — offering a user-friendly touchscreen interface with simple single-cable installation.\u003c\/p\u003e\n\u003ch4\u003eGenerator Auto Start\/Stop\u003c\/h4\u003e\n\u003cp\u003eSupports programmable generator start and stop functions based on battery levels, load conditions, or time schedules for efficient power management.\u003c\/p\u003e\n\u003ch4\u003eCompact and Cost-Effective\u003c\/h4\u003e\n\u003cp\u003eA budget-friendly solution for standard energy systems — same core functionality as the Cerbo GX without tank\/temperature monitoring inputs.\u003c\/p\u003e\n\u003ch4\u003eEasy Installation\u003c\/h4\u003e\n\u003cp\u003eSupports wall mounting and DIN rail mounting (with adapter). Designed for quick setup and suitable for marine, RV, and off-grid installations.\u003c\/p\u003e\n\u003ch4\u003eVictronConnect App Support\u003c\/h4\u003e\n\u003cp\u003eBluetooth-enabled quick configuration and monitoring via the VictronConnect app — no additional wiring required for initial setup.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e8–70V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003eApprox. 2.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall or DIN rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Direct ports\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Bus\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB ports\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelays\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003eSee the Data Sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Cerbo-GX-GX-Touch-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Cerbo_GX\/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119789326585,"sku":"IVV50239","price":218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50239-1.webp?v=1781801149"},{"product_id":"victron-ekrano-gx","title":"Victron Ekrano GX","description":"\u003cp\u003eThe Victron Ekrano GX is the most powerful GX communication centre in the Victron product family and the direct successor to the Color Control GX. Combining a complete range of communication interfaces with a built-in waterproof 7-inch touchscreen display in a single slim aluminium enclosure, it serves as the central hub for monitoring, controlling, and optimising any Victron energy system — locally or remotely — from a single device.\u003c\/p\u003e\n\u003cp\u003eThe integrated 7-inch touchscreen (1024 × 600 pixels, 1000 cd\/m² peak brightness) provides an instant real-time overview of the entire system — battery state of charge, power consumption, solar harvest, generator and mains input, tank levels, and temperature measurements — all accessible at a touch. The display brightness is managed automatically via a built-in ambient light sensor, and a recessed rear button allows the touch function to be locked to prevent unauthorised changes. When installed with the supplied steel bracket, the front panel is rated IP54 and fully watertight.\u003c\/p\u003e\n\u003cp\u003eThe Ekrano GX features an extensive set of communication ports: three isolated VE.Direct ports, one isolated VE.Bus port with two paralleled RJ45 sockets, two VE.Can ports (one isolated, one non-isolated), Ethernet, WiFi, Bluetooth Smart, two USB-A host ports, and a MicroSD card slot. This connectivity enables it to interface with virtually every Victron product as well as a wide and growing range of supported third-party devices, including lithium battery manufacturers, PV inverters, and NMEA 2000 marine devices.\u003c\/p\u003e\n\u003cp\u003eThrough the Victron Remote Management (VRM) portal, users can monitor, control, and configure the entire system remotely from any internet-connected device. The built-in WiFi access point enables direct local access via the VictronConnect app or Remote Console without the need for a router. Advanced users can extend system automation using Node-RED flows directly on the device, while marine users benefit from full NMEA 2000 integration and MFD glass bridge app support.\u003c\/p\u003e\n\u003cp\u003eOptimised for flush panel or blind hole mounting with all necessary hardware included, the Ekrano GX is suitable for off-grid, marine, RV, and professional energy system installations requiring a high-performance, all-in-one GX monitoring and control solution.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eBuilt-In 7-Inch Waterproof Touchscreen Display\u003c\/h4\u003e\n\u003cp\u003eThe integrated 7-inch touchscreen (1024 × 600 pixels, 1000 cd\/m² peak brightness) provides immediate system-wide visibility and control. Dynamic backlight dimming via a built-in ambient light sensor adjusts brightness automatically, with a timer for scheduled auto on\/off and a recessed rear button to lock the touch function against unauthorised use.\u003c\/p\u003e\n\u003ch4\u003eMost Powerful GX Device — Quad-Core Processor\u003c\/h4\u003e\n\u003cp\u003ePowered by a quad-core processor running the latest Venus OS, the Ekrano GX handles all connected Victron products and a wide range of third-party devices simultaneously without performance compromise — supporting up to 25 VE.Direct devices and multiple VE.Can and VE.Bus products concurrently.\u003c\/p\u003e\n\u003ch4\u003eComprehensive Communication Port Range\u003c\/h4\u003e\n\u003cp\u003eEquipped with 3 isolated VE.Direct ports, 1 isolated VE.Bus port (2 × RJ45), 2 VE.Can ports (isolated and non-isolated), Ethernet, WiFi, Bluetooth Smart, 2 × USB-A host ports, and a MicroSD card slot — providing connectivity to virtually every Victron product and a broad ecosystem of supported third-party devices.\u003c\/p\u003e\n\u003ch4\u003eVRM Remote Monitoring and Remote Console\u003c\/h4\u003e\n\u003cp\u003eFull remote monitoring, control, and configuration of the entire system is available via the Victron Remote Management (VRM) portal, with the same Remote Console interface accessible over local LAN or the device's built-in WiFi access point — allowing complete system management from anywhere in the world.\u003c\/p\u003e\n\u003ch4\u003eNMEA 2000 and MFD Integration\u003c\/h4\u003e\n\u003cp\u003eFull NMEA 2000 marine industry standard integration enables the Ekrano GX to interface with glass bridge Multi-Functional Displays, making it ideal for advanced marine installations that require seamless integration between electrical system monitoring and vessel navigation displays.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Relays and IO\u003c\/h4\u003e\n\u003cp\u003eTwo NO\/NC programmable relays support functions including alarm relay, generator start\/stop, tank pump, and temperature-controlled relay. Three resistive tank level inputs, two temperature sense inputs, and two digital inputs (supporting open\/closed alarm monitoring and pulse counting) complete the IO capability.\u003c\/p\u003e\n\u003ch4\u003eNode-RED Automation Support\u003c\/h4\u003e\n\u003cp\u003eAdvanced system automation is possible directly on the Ekrano GX using Node-RED, the browser-based low-code flow editor built into Venus OS — enabling custom automation rules, triggers, and integrations without external hardware or programming expertise.\u003c\/p\u003e\n\u003ch4\u003eFlexible Flush or Blind Hole Mounting\u003c\/h4\u003e\n\u003cp\u003eThe Ekrano GX installs via a standard flush panel cut-out with all mounting hardware included — a steel bracket for flush mounting (IP54 front) and springs for blind hole mounting (IP31 front). Screw-on power and relay terminal blocks and a quick-release IO clamp simplify wiring and field servicing.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e8-70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Draw (Display On, 100% Brightness)\u003c\/td\u003e\n\u003ctd\u003e6.2W @ 12V | 6.6W @ 24V | 7.4W @ 48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Ports\u003c\/td\u003e\n\u003ctd\u003e3 × VE.Direct | 1 × VE.Bus (2 × RJ45) | 2 × VE.Can | Ethernet | WiFi | Bluetooth | 2 × USB-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Resolution\u003c\/td\u003e\n\u003ctd\u003e1024 × 600 pixels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Brightness\u003c\/td\u003e\n\u003ctd\u003e1000 cd\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelays\u003c\/td\u003e\n\u003ctd\u003e2 × NO\/NC (DC: 3A @ 30V | AC: 1A @ 125VAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIO\u003c\/td\u003e\n\u003ctd\u003e3 × tank level inputs | 2 × temperature inputs | 2 × digital inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eFront IP54 (steel bracket) \/ IP31 (springs) | Back IP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e124 × 187 × 29.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Ekrano-GX-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Ekrano_GX\/140558-Ekrano_GX__Venus_GX__Cerbo_GX__Cerbo-S_GX_Manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47119789359353,"sku":"IVV50248","price":619.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50248-1.webp?v=1778994065"},{"product_id":"victron-digital-multi-control-gx","title":"Victron Digital Multi Control 200\/200A GX","description":"\u003cp\u003eThe Victron Digital Multi Control 200\/200A GX (DMC) is a remote monitoring and control panel designed to work with all Victron MultiPlus and Quattro inverter\/charger systems - including stand-alone, parallel, and two or three-phase configurations. Connecting to the inverter\/charger via a standard RJ45 UTP cable, it provides a clean, professionally finished control interface for mounting in the helm, dashboard, or system control panel of any vessel, vehicle, or off-grid installation.\u003c\/p\u003e\n\u003cp\u003eThe primary function of the Digital Multi Control is to allow the AC input current limit - for both PowerControl (shore power management) and PowerAssist (battery supplement) - to be adjusted directly at the panel without accessing the inverter\/charger itself. The rotary control knob adjusts the AC input current limit in real time up to 200A, covering both AC input 1 (typically shore power) and AC input 2 (typically generator) on Quattro systems independently. The selected current limit is displayed on LEDs, and the inverter\/charger can be switched between On, Off, and Charger-Only modes using the mode switch.\u003c\/p\u003e\n\u003cp\u003eThe GX variant of the Digital Multi Control features a modern plastic faceplate with no visible mounting holes - using an included mounting frame that allows the panel to be fitted from either the front or back of the panel cut-out, giving a clean, professional finish without exposed fixing screws. A built-in ambient light sensor automatically reduces LED brightness in low-light conditions, preventing the panel from becoming an unwanted light source in darkened helm stations or sleeping quarters.\u003c\/p\u003e\n\u003cp\u003eAvailable in two RJ45 connector configurations - standard straight  and 90-degree right-angle - the panel suits both standard and space-constrained panel installations. Compatible with both VE.Bus and legacy pre-VE.Bus inverter\/charger systems (firmware 15xx, 17xx, and 18xx).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/8pR9utgkjSI?si=F1Uuu0W8Ed5rGnBw\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eRemote AC Input Current Limit Adjustment - Up to 200A\u003c\/h4\u003e\n\u003cp\u003eThe rotary control knob adjusts the AC input current limit for PowerControl and PowerAssist in real time - up to 200A - directly at the panel without requiring access to the inverter\/charger unit. The current limit can be set independently for both AC inputs on Quattro systems.\u003c\/p\u003e\n\u003ch4\u003eOn \/ Off \/ Charger-Only Mode Control\u003c\/h4\u003e\n\u003cp\u003eA mode switch enables the inverter\/charger to be switched between Inverter+Charger (On), Charger-Only, and Off modes from the remote panel - providing full operational control of the MultiPlus or Quattro without physical access to the unit.\u003c\/p\u003e\n\u003ch4\u003eCompatible with All Multi and Quattro Systems\u003c\/h4\u003e\n\u003cp\u003eWorks with all MultiPlus and Quattro inverter\/charger configurations - single unit, parallel, two-phase, and three-phase - and with both current VE.Bus and legacy pre-VE.Bus systems running firmware versions 15xx, 17xx, and 18xx. No additional configuration is required for VE.Bus systems - simply connect via RJ45 UTP cable.\u003c\/p\u003e\n\u003ch4\u003eGX Plastic Faceplate - No Visible Mounting Holes\u003c\/h4\u003e\n\u003cp\u003eThe modern plastic GX faceplate uses an included mounting frame to allow installation from either the front or back of the panel cut-out - concealing all fixing hardware for a clean, professional finish suitable for high-visibility installations on helm stations and dashboard panels.\u003c\/p\u003e\n\u003ch4\u003eAutomatic LED Brightness Reduction at Night\u003c\/h4\u003e\n\u003cp\u003eA built-in ambient light sensor automatically reduces LED brightness as ambient light drops - preventing the panel from becoming an unwanted light source in darkened helm stations, sleeping accommodation, or vehicle cabins during overnight operation.\u003c\/p\u003e\n\u003ch4\u003eAvailable with Straight and 90-Degree Right-Angle RJ45 Connectors\u003c\/h4\u003e\n\u003cp\u003eAvailable in two RJ45 connector configurations - straight  for standard installations, and 90-degree right-angle  for space-constrained panel installations where the cable must exit parallel to the panel surface - ensuring clean cable routing in any installation environment.\u003c\/p\u003e\n\u003ch4\u003eSimple RJ45 UTP Cable Connection - No Extra Setup\u003c\/h4\u003e\n\u003cp\u003eInstallation requires only a standard UTP patch cable with RJ45 connectors - connecting the panel to the inverter\/charger's VE.Bus port. In the vast majority of installations no further configuration is required, making the Digital Multi Control one of the simplest remote panels to commission.\u003c\/p\u003e\n\u003ch4\u003eECE R10-6 Automotive Certified\u003c\/h4\u003e\n\u003cp\u003eCertified to ECE R10-6 automotive electromagnetic compatibility standards — confirming suitability for installation in vehicles, motorhomes, and other road-going applications subject to automotive EMC requirements.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Systems\u003c\/td\u003e\n\u003ctd\u003eAll MultiPlus and Quattro (VE.Bus and pre-VE.Bus firmware 15xx \/ 17xx \/ 18xx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Current Setting Range\u003c\/td\u003e\n\u003ctd\u003eUp to 200A (both AC inputs on Quattro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Functions\u003c\/td\u003e\n\u003ctd\u003eAC input current limit (rotary knob) | On \/ Off \/ Charger-Only mode switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eUTP RJ45 cable (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFaceplate Material\u003c\/td\u003e\n\u003ctd\u003ePlastic (no visible mounting holes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFront or rear panel mount (mounting frame included) - 65 × 120 mm cut-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Behind Panel\u003c\/td\u003e\n\u003ctd\u003e≥ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic Night Dimming\u003c\/td\u003e\n\u003ctd\u003eYes - ambient light sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eECE R10-6 (automotive EMC) | Declaration of Conformity | ISO9001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg (0.4 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Digital_Multi_Control_GX\/153833-Digital_Multi_Control-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Dimensions-of-plastic-panel-for-DMC000200000R-Digital-Multi-Control-200-200A-GX-_v1.0.pdf\" target=\"_blank\"\u003ePanel Dimension Drawing\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47122631852281,"sku":"IVV50222","price":129.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50222-1.webp?v=1780422708"},{"product_id":"victron-multiplus-3000va-12v-24v-120v-ve-bus","title":"Victron MultiPlus 3000VA 12V\/24V 120V VE.Bus","description":"\u003cp\u003eThe Victron MultiPlus 3000VA is a multifunctional inverter\/charger that combines a powerful true sine wave inverter, an adaptive four-stage battery charger, and a high-speed AC transfer switch into a single compact enclosure. Available in 12V\/120A charge (MultiPlus 12\/3000\/120-50) and 24V\/70A charge (MultiPlus 24\/3000\/70-50) variants, it delivers 3000 VA of continuous inverter output while simultaneously managing AC input from shore power or a generator - designed for marine, RV, and off-grid applications.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the MultiPlus is the PowerAssist feature, which allows the unit to supplement limited shore or generator power with energy drawn from the battery during peak demand periods. When loads reduce, the surplus AC input is automatically redirected to recharge the battery. Complementing this is PowerControl, which monitors AC input current and prevents generator or shore supply overloads by intelligently reducing charge current as required.\u003c\/p\u003e\n\u003cp\u003eThe MultiPlus provides two AC outputs. The primary output (AC-out-1) features no-break functionality, switching to inverter operation in less than 20 milliseconds during a grid or generator failure - fast enough that computers and sensitive electronics continue to operate without interruption. The secondary output (AC-out-2) is live only when an external AC source is present, making it ideal for non-critical loads such as water heaters that should not draw from the battery.\u003c\/p\u003e\n\u003cp\u003eThe onboard adaptive charger automatically fine-tunes its four-stage charging process to suit the battery's condition, adjusting absorption time based on how deeply the battery has been discharged. An independent trickle charge output is also provided for a separate starter or generator battery, enabling dual-bank charging from a single unit.\u003c\/p\u003e\n\u003cp\u003eBuilt for system scalability, up to six MultiPlus units can operate in parallel for higher power output, and three units can be configured for three-phase operation. Two units can be stacked to deliver 120-0-120V split-phase power. VE.Bus communication enables full integration with Victron GX devices, the VRM Online Portal, and the VictronConnect app for remote monitoring, configuration, and firmware updates. Certified to UL 1741 and UL 458 standards for North American installations.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=FYC9fDMNQobgwcW6\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTrue Sine Wave Inverter\u003c\/h4\u003e\n\u003cp\u003eThe MultiPlus delivers a clean 120 VAC ± 2% true sine wave output at 60 Hz, providing 3000 VA \/ 2400W of continuous power at 25°C and 6000W peak capacity to handle motor startup surges and high-demand loads without distortion.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist - Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply with power drawn from the battery. Once demand drops, the surplus input is used to recharge the battery, maximising use of every available watt.\u003c\/p\u003e\n\u003ch4\u003ePowerControl - Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003ePowerControl continuously monitors the shore or generator input current and automatically reduces battery charging as needed to prevent the AC source from being overloaded, enabling smaller generators to power larger systems safely.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer - Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure, the MultiPlus switches to inverter operation in less than 20 milliseconds - fast enough to keep computers, communication equipment, and sensitive electronics running without interruption.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted power with UPS functionality, while the secondary output (AC-out-2) is live only when an AC source is present. Non-critical loads such as water heaters can be connected to AC-out-2 to prevent them from discharging the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eFour-Stage Adaptive Battery Charger\u003c\/h4\u003e\n\u003cp\u003eThe built-in adaptive charger - 120A on the 12V model and 70A on the 24V model — automatically adjusts its absorption time based on battery discharge depth and condition, adding a fourth storage stage during extended float periods. An independent 4A trickle charge output simultaneously maintains a separate starter or generator battery.\u003c\/p\u003e\n\u003ch4\u003eParallel, Three-Phase, and Split-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six MultiPlus units can be connected in parallel for higher output power, and three units can be configured for three-phase operation - enabling systems up to 45 kW \/ 54 kVA. Two units can be stacked to provide 120-0-120V split-phase power for North American installations.\u003c\/p\u003e\n\u003ch4\u003eVE.Bus System Integration\u003c\/h4\u003e\n\u003cp\u003eThe VE.Bus communication port enables full integration with Victron GX devices, the VRM Online Portal, and the VictronConnect app, allowing remote monitoring, system configuration, parallel and three-phase setup, firmware updates, and alarm management from anywhere.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMultiPlus 12\/3000\/120-50\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMultiPlus 24\/3000\/70-50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9.5-17V (12V battery)\u003c\/td\u003e\n\u003ctd\u003e19-33V (24V battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e95-140 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (25°C \/ 77°F)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3000 VA \/ 2400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (40°C \/ 104°F)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e93%\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd\u003e120A\u003c\/td\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Transfer Switch\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e19 kg (40 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e362 × 258 × 218 mm (14.3 × 10.2 × 8.6 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Multiplus-inverter-charger_2kVA-and-3kVA-120V-US-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/User-Manual-MultiPlus-3k-120V-(firmware-xxxx4xx)-EN-ES.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"MultiPlus 12\/3000\/120-50 120V","offer_id":48428714361081,"sku":"IVV30212","price":1168.75,"currency_code":"USD","in_stock":true},{"title":"MultiPlus 24\/3000\/70-50 120V","offer_id":48428714393849,"sku":"IVV30228","price":1168.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV30228-1.webp?v=1779425861"},{"product_id":"victron-multiplus-c-2000w-120vac-inverter-chargers","title":"Victron MultiPlus Compact 12\/24\/2000\/ 120V VE.Bus (UL 458) Inverter\/Chargers","description":"\u003cp\u003eThe Victron MultiPlus Compact is a multifunctional inverter\/charger that combines a powerful true sine wave inverter, an adaptive four-stage battery charger, and a high-speed AC transfer switch in a single compact enclosure - smaller and lighter than the standard MultiPlus while delivering the same core performance. Available in two variants for the North American market - 12\/2000\/80-50 and 24\/2000\/50-50 - both models deliver 2000 VA of continuous inverter output, a 50A AC transfer switch, two AC outputs, PowerAssist, PowerControl, and full VE.Bus system integration. Certified to UL 458 for North American marine and vehicle installations.\u003c\/p\u003e\n\u003cp\u003eThe \"Compact\" designation refers to the use of a single larger toroidal transformer rather than two smaller ones - resulting in a slightly reduced peak surge power rating compared to the standard MultiPlus, but delivering higher efficiency and a significantly smaller and lighter enclosure. This makes the MultiPlus Compact an ideal choice for installations where space is at a premium, such as in smaller vessels, motorhomes, and vehicles where the larger standard MultiPlus enclosure would not fit.\u003c\/p\u003e\n\u003cp\u003eThe primary AC output (AC-out-1) provides no-break UPS functionality, switching to inverter mode in less than 20 milliseconds during a shore power or generator failure - fast enough that computers and sensitive electronics continue to operate without interruption. The secondary output (AC-out-2) is live only when an AC source is present, allowing non-critical loads such as water heaters to be connected without risk of battery discharge when running on inverter power. An independent 4A trickle charge output simultaneously maintains a separate starter or generator battery.\u003c\/p\u003e\n\u003cp\u003eAll settings can be configured using DIP switches - including parallel and three-phase operation - without requiring a computer. For advanced configuration, VE.Bus Quick Configure and VE.Bus System Configurator software are available via an MK3-USB interface. Up to six units can be connected in parallel for higher power, and three units configured for three-phase output. Two units can be stacked for 120-0-120V split-phase power for North American installations.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=Qdel3WxzC6lkNoEZ\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTrue Sine Wave Inverter - 2000 VA \/ 1600W Continuous\u003c\/h4\u003e\n\u003cp\u003eDelivers a clean 120 VAC ± 2% true sine wave output at 60 Hz with 2000 VA \/ 1600W continuous power at 25°C and 4000W peak — handling motor startup surges and high-demand loads without distortion. The compact single-toroidal design provides higher efficiency than the standard two-transformer MultiPlus at this power level.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist - Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply with power drawn from the battery. Once demand drops, the surplus input is used to recharge the battery - maximising every available watt from a limited shore or generator connection.\u003c\/p\u003e\n\u003ch4\u003ePowerControl - Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003eA maximum AC input current limit is set on the MultiPlus Compact, which then monitors all connected loads and automatically reduces battery charging as needed to prevent the shore supply or generator from being overloaded - enabling smaller generators to safely power larger systems.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer - Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure the MultiPlus Compact switches to inverter operation in less than 20 milliseconds - fast enough that computers, communication equipment, and sensitive electronics continue to operate without interruption.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs - Primary UPS and Auxiliary Non-Critical\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted UPS power. The secondary output (AC-out-2) is live only when an AC source is present — allowing non-critical loads such as water heaters to be connected without discharging the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eFour-Stage Adaptive Battery Charger with Dual Bank Output\u003c\/h4\u003e\n\u003cp\u003eThe adaptive charger automatically adjusts absorption time based on battery discharge depth - keeping absorption short after shallow discharges and extending it after deep discharges. A Storage mode reduces float voltage after 24 hours to minimise gassing and corrosion. An independent 4A trickle charge output simultaneously maintains a separate starter or generator battery.\u003c\/p\u003e\n\u003ch4\u003eCompact Single Toroidal Transformer - Smaller and Lighter\u003c\/h4\u003e\n\u003cp\u003eThe use of a single larger toroidal transformer instead of two smaller ones results in a more compact and lightweight enclosure than the standard MultiPlus at the same power rating - making it the preferred choice for space-constrained installations in smaller vessels, motorhomes, and vehicles.\u003c\/p\u003e\n\u003ch4\u003eDIP Switch Configuration - No Computer Required\u003c\/h4\u003e\n\u003cp\u003eAll key settings - including parallel operation, three-phase configuration, AC input current limits, and battery type - can be configured directly using DIP switches on the unit. Advanced configuration via VE.Bus software and an MK3-USB interface is also available for more complex system setups.\u003c\/p\u003e\n\u003ch4\u003eParallel, Three-Phase, and Split-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six MultiPlus Compact units can be connected in parallel for higher power output, three units configured for three-phase operation, or two units stacked to provide 120-0-120V split-phase power - enabling systems up to 12 kVA single-phase or 36 kVA three-phase from this compact model family.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\/2000\/80-50 120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/2000\/50-50 120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCMP122200102\u003c\/td\u003e\n\u003ctd\u003eCMP242200100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9.5-17V\u003c\/td\u003e\n\u003ctd\u003e19-33V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e95-140 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2000 VA \/ 1600W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1450W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e92%\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd\u003e80A\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrickle Charge Output\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4A (independent, for starter battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Transfer Switch\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage (default)\u003c\/td\u003e\n\u003ctd\u003e14.4V\u003c\/td\u003e\n\u003ctd\u003e28.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage (default)\u003c\/td\u003e\n\u003ctd\u003e13.8V\u003c\/td\u003e\n\u003ctd\u003e27.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUL 458\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e13 kg (28.7 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e520 x 255 x 125 mm (20.5 × 10 × 5 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Multiplus-inverter-charger_2kVA-and-3kVA-120V-US-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-MultiPlus-Compact-2000-120V-REV-09-EN.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"24 | 2000 | 50-50 120V","offer_id":47125539520761,"sku":"IVV02024","price":810.9,"currency_code":"USD","in_stock":true},{"title":"12 | 2000 | 80-50 120V","offer_id":47125539487993,"sku":"IVV02012","price":904.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV02012-1.webp?v=1779443312"},{"product_id":"victron-quattro-5000w-120vac-inverter-chargers","title":"Victron Quattro 5000\/120V VE.Bus Inverter\/Chargers","description":"\u003cp\u003eThe Victron Quattro 5000VA 120V is the most capable inverter\/charger in the Victron 5kVA range - combining a powerful true sine wave inverter, an adaptive four-stage battery charger, and two independent AC inputs with automatic transfer switching into a single robust aluminium enclosure. Available in three battery voltage variants — 12\/5000\/220-100\/100, 24\/5000\/120-100\/100, and 48\/5000\/70-100\/100 - all models deliver 5000 VA of continuous inverter output from a single unit, with two 100A AC input transfer switches, two AC outputs, PowerAssist, PowerControl, and full VE.Bus system integration. Certified to UL 1741 (48V model) and meeting EN\/IEC safety standards for North American and international installations.\u003c\/p\u003e\n\u003cp\u003eThe defining characteristic of the Quattro - and the key distinction from the MultiPlus - is the presence of two independent AC inputs with automatic transfer switching. One input can be connected to shore power and the other to a generator, with the Quattro automatically connecting to whichever source is live. Each input has its own independently configurable current limit for PowerControl and PowerAssist. The Quattro will never connect the two AC inputs together, making it intrinsically safe for use with two independent AC sources simultaneously present.\u003c\/p\u003e\n\u003cp\u003eThe primary AC output (AC-out-1) has no-break UPS functionality - transferring to inverter operation in less than 20 milliseconds in the event of a grid or generator failure, fast enough that computers and sensitive electronics continue operating without interruption. The secondary output (AC-out-2) is live only when AC is present on one of the inputs, making it ideal for non-critical loads such as water heaters that must not draw from the battery. Three programmable relays support general alarm, DC undervoltage, and generator start\/stop functions.\u003c\/p\u003e\n\u003cp\u003eFor system scalability, up to four sets of three Quattro units can be parallel connected in a three-phase configuration - providing up to 96kW \/ 120kVA of inverter power and more than 1600A of charging capacity from a single three-phase system. Two units can be configured for split-phase 120\/240V output for North American installations. Full VE.Bus integration enables monitoring, configuration, and firmware updates via Victron GX devices, the VRM Online Portal, and the VictronConnect app.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=VHbAtB3fnfSLj_eQ\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTwo Independent AC Inputs with Automatic Transfer Switching\u003c\/h4\u003e\n\u003cp\u003eThe Quattro accepts two independent AC sources — such as shore power and a generator - and automatically connects to whichever is live. Each input has its own independently configurable PowerControl current limit. The two inputs are never bridged together, ensuring complete electrical isolation between the two AC sources at all times.\u003c\/p\u003e\n\u003ch4\u003eTrue Sine Wave Inverter - 5000 VA \/ 4000W Continuous\u003c\/h4\u003e\n\u003cp\u003eDelivers a clean 120 VAC ± 2% true sine wave output at 60 Hz with 5000 VA \/ 4000W of continuous power at 25°C and 10000W peak capacity - handling motor startup surges, high-demand appliances, and heavy loads without distortion or voltage variation.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist - Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply by drawing from the battery. Once demand drops, surplus AC input is used to recharge the battery - maximising every available watt from shore power or generator connections of any size.\u003c\/p\u003e\n\u003ch4\u003ePowerControl - Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003eAn independently configurable current limit on each AC input monitors all connected loads and automatically reduces battery charging to prevent overloading the shore supply or generator - enabling smaller, more fuel-efficient generators to power larger systems without risk of overload shutdown.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer - Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure, the Quattro switches to inverter operation in less than 20 milliseconds - fast enough that computers, communication equipment, and sensitive electronics continue to operate without interruption or power cycling.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs - Primary UPS and Auxiliary Non-Critical\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted UPS power. The secondary output (AC-out-2) is live only when AC is present at one of the inputs - preventing non-critical loads such as water heaters and air conditioners from drawing from the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eFour-Stage Adaptive Battery Charger with Starter Battery Output\u003c\/h4\u003e\n\u003cp\u003eThe adaptive charger automatically adjusts absorption time based on battery discharge depth and condition. An independent 4A trickle charge output (12V and 24V models only) simultaneously maintains a separate starter or generator battery. Three programmable relays support alarm, DC undervoltage, and generator start\/stop functions.\u003c\/p\u003e\n\u003ch4\u003eParallel, Three-Phase, and Split-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to four sets of three Quattro units can be connected in parallel for three-phase operation - enabling systems up to 96kW \/ 120kVA and more than 1600A charging capacity. Two units can be configured for 120\/240V split-phase output for North American installations.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\/5000\/220-100\/100\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/5000\/120-100\/100\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e48\/5000\/70-100\/100\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9.5-17V\u003c\/td\u003e\n\u003ctd\u003e19-33V\u003c\/td\u003e\n\u003ctd\u003e38-66V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e90-140 VAC, 55-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Inputs\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e2 × independent with automatic transfer switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Feed-Through Current\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e2 × 100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e5000 VA \/ 4000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e3700W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (65°C)\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e3000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e10000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003ctd\u003e95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd\u003e220A\u003c\/td\u003e\n\u003ctd\u003e120A\u003c\/td\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage\u003c\/td\u003e\n\u003ctd\u003e14.4V\u003c\/td\u003e\n\u003ctd\u003e28.8V\u003c\/td\u003e\n\u003ctd\u003e57.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd\u003e13.8V\u003c\/td\u003e\n\u003ctd\u003e27.6V\u003c\/td\u003e\n\u003ctd\u003e55.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Voltage\u003c\/td\u003e\n\u003ctd\u003e13.2V\u003c\/td\u003e\n\u003ctd\u003e26.4V\u003c\/td\u003e\n\u003ctd\u003e52.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStarter Battery Trickle Charge\u003c\/td\u003e\n\u003ctd\u003e4A\u003c\/td\u003e\n\u003ctd\u003e4A\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgrammable Relays\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e3 × (alarm \/ DC undervoltage \/ genset start-stop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eEN\/IEC 60335, ECE R10-5\u003c\/td\u003e\n\u003ctd\u003eUL 1741, EN\/IEC 60335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e34 kg (75 lbs)\u003c\/td\u003e\n\u003ctd\u003e30 kg (66 lbs)\u003c\/td\u003e\n\u003ctd\u003e30 kg (66 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e470 × 350 × 280 mm\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e444 × 328 × 240 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Quattro-3-10kVA-120V-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Quattro-5k-8k-10k-15K-100-100A-230V-(firmware-xxxx4xx)-EN-NL-FR-DE-ES-SE-IT.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"48V","offer_id":47125539619065,"sku":"IVV35048","price":1695.75,"currency_code":"USD","in_stock":true},{"title":"24V","offer_id":47125539651833,"sku":"IVV35024","price":2244.85,"currency_code":"USD","in_stock":true},{"title":"12V","offer_id":47125539586297,"sku":"IVV35012","price":2834.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV35024-1.webp?v=1779703540"},{"product_id":"victron-quattro-48v-3000w-120vac-inverter-chargers","title":"Victron Quattro 48\/3000\/35-50\/50 120V VE.Bus Inverter\/Chargers","description":"\u003cp\u003eThe Victron Quattro 48\/3000\/35-50\/50 120V (QUA483021100) is a multifunctional inverter\/charger that combines a powerful true sine wave inverter, an adaptive four-stage battery charger, and two independent AC inputs with automatic transfer switching into a single compact aluminium enclosure. Designed for North American 120V installations with a 48V battery bank, it delivers 3000 VA of continuous inverter output while simultaneously managing two independent AC sources — such as shore power and a generator — with full VE.Bus system integration for comprehensive monitoring, control, and remote management.\u003c\/p\u003e\n\u003cp\u003eThe defining characteristic of the Quattro is its two independent AC inputs with automatic transfer switching — the key distinction from the MultiPlus, which has only one AC input. One input connects to shore power and the other to a generator or secondary supply, with the Quattro automatically selecting the active source. Each AC input has its own independently configurable PowerControl current limit of up to 50A, and the Quattro will never connect the two inputs together — making it intrinsically safe for use with two independent AC sources simultaneously present.\u003c\/p\u003e\n\u003cp\u003eThe primary AC output (AC-out-1) provides no-break UPS functionality — transferring to inverter operation in less than 20 milliseconds in the event of a grid or generator failure, fast enough that computers and sensitive electronics continue operating without interruption. The secondary output (AC-out-2) is live only when AC is present on one of the inputs, making it ideal for loads that must not draw from the battery — such as water heaters and other high-consumption appliances.\u003c\/p\u003e\n\u003cp\u003eUp to six Quattro units can be connected in parallel for higher power output, and three units configured for three-phase operation. Two units can be stacked for 120\/240V split-phase output for North American installations. Three programmable relays support general alarm, DC undervoltage, and generator start\/stop functions. VE.Bus integration enables full monitoring, configuration, and firmware updates via Victron GX devices, the VRM Online Portal, and the VictronConnect app.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=jx-puNDVqegez_vF\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTwo Independent AC Inputs with Automatic Transfer Switching\u003c\/h4\u003e\n\u003cp\u003eAccepts two independent AC sources — such as shore power and a generator — and automatically connects to whichever is live. Each input has its own independently configurable PowerControl current limit of up to 50A, and the two inputs are never bridged together, ensuring complete electrical isolation between both AC sources at all times.\u003c\/p\u003e\n\u003ch4\u003eTrue Sine Wave Inverter — 3000 VA \/ 2400W Continuous\u003c\/h4\u003e\n\u003cp\u003eDelivers a clean 120 VAC ± 2% true sine wave output at 60 Hz with 3000 VA \/ 2400W of continuous power at 25°C and 6000W peak capacity — handling motor startup surges and high-demand loads without distortion or voltage variation.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist — Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply with power drawn from the battery. Once demand drops, surplus AC input is used to recharge the battery — maximising every available watt from shore power or generator connections of any size.\u003c\/p\u003e\n\u003ch4\u003ePowerControl — Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003eAn independently configurable current limit on each AC input monitors all connected loads and automatically reduces battery charging to prevent overloading the shore supply or generator — enabling smaller, more fuel-efficient generators to power larger systems without risk of overload shutdown.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer — Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure the Quattro switches to inverter operation in less than 20 milliseconds — fast enough that computers, communication equipment, and sensitive electronics continue operating without interruption or power cycling.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs — Primary UPS and Auxiliary Non-Critical\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted UPS power. The secondary output (AC-out-2) is live only when AC is present at one of the inputs — preventing non-critical loads such as water heaters from discharging the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eFour-Stage Adaptive Battery Charger — 35A\u003c\/h4\u003e\n\u003cp\u003eThe 35A adaptive charger automatically adjusts absorption time based on battery discharge depth and condition — keeping absorption short after shallow discharges and extending it after deep discharges. The 48V model does not include a starter battery trickle charge output.\u003c\/p\u003e\n\u003ch4\u003eParallel, Split-Phase, and Three-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six Quattro units can be connected in parallel for higher power output, three units configured for three-phase operation, or two units stacked for 120\/240V split-phase output — enabling systems from 3kVA to 18kVA single-phase or 54kVA three-phase from this model family.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 100.036%; height: 431.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003eQUA483021100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e38-66V (48V battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eAC Input Voltage Range\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e95-130 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eAC Inputs\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e2 × independent with automatic transfer switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eMaximum Feed-Through Current\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e2 × 50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e3000 VA \/ 2400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e2000W\/2200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003ePeak Power\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 39.2px;\"\u003eZero Load Power (normal \/ AES \/ search)\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 39.2px;\"\u003e25W \/ 20W \/ 12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e35A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eStarter Battery Trickle Charge\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003eNot available (48V model)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eAbsorption Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e57.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e55.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eStorage Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e52.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 39.2px;\"\u003eProgrammable Relays\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 39.2px;\"\u003e3 × (alarm \/ DC undervoltage \/ genset start-stop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e -40 to +65°C (fan assisted cooling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e19 kg (42 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 43.9818%; height: 19.6px;\"\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd style=\"width: 53.5583%; height: 19.6px;\"\u003e362 × 258 × 218 mm (14.3 × 10.2 × 8.6 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Quattro-3-10kVA-120V-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Quattro-3k-50-50A-120V-(firmware-xxxx4xx)-EN.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125539684601,"sku":"IVV30348","price":1389.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV30348-1.webp?v=1779727255"},{"product_id":"victron-inverter-24v-3kw-120v-60hz","title":"Victron Inverter 24\/3000 120V 60Hz VE.Bus","description":"\u003cp\u003eThe Victron Phoenix Inverter 24\/3000 120V VE.Bus (PIN243020100) is a professional-grade true sine wave inverter delivering 3000 VA of continuous 120V AC output from a 24V battery bank - designed for marine, RV, off-grid, and vehicle applications where reliable, high-quality AC power is required from a 24V DC source. Employing Victron's SinusMax hybrid high-frequency and line-frequency technology, it combines the compact dimensions and lightweight design of high-frequency inverters with the high start-up surge power and robustness of line-frequency designs.\u003c\/p\u003e\n\u003cp\u003eThe VE.Bus communication port enables connection to the Phoenix Inverter Control panel for remote on\/off and AES (Automatic Economy Switching) mode control, to a Victron GX device for system monitoring and VRM integration, and to the MK3-USB interface for firmware updates and advanced configuration via VE.Configure on a computer. Up to six Phoenix 24\/3000 units can be connected in parallel to deliver up to 18kVA \/ 14.4kW, and three units can be configured for three-phase output - providing a scalable inverter platform for larger installations without requiring a different product family.\u003c\/p\u003e\n\u003cp\u003eAES mode minimises no-load power consumption by reducing inverter output voltage slightly to decrease standby losses - automatically deactivating when a load is connected and returning to full output. A search (ECO) mode periodically checks for a connected load and shuts down between checks, providing the lowest possible no-load current draw. A remote on\/off terminal allows the inverter to be switched on and off by a low-current signal without routing high current through the switch itself.\u003c\/p\u003e\n\u003cp\u003eThe Phoenix 24\/3000 includes comprehensive electronic protection - output short-circuit proof, overtemperature shutdown with automatic restart, and low battery voltage alarm and cut-off with configurable thresholds via VictronConnect or VE.Configure. Its IP21-rated blue aluminium enclosure is suitable for installation in dry indoor locations including marine cabins, battery rooms, and vehicle electrical compartments.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=knFPe5j3qyC5PpGw\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eSinusMax Hybrid HF Technology - True Sine Wave Output\u003c\/h4\u003e\n\u003cp\u003eCombines high-frequency and line-frequency inverter technologies - delivering a clean 120 VAC ± 2% true sine wave at 60 Hz with the compact form factor of an HF inverter and the high surge power capability of a line-frequency design, suitable for all AC loads including sensitive electronics and motor-driven equipment.\u003c\/p\u003e\n\u003ch4\u003eHigh Start-Up Surge Power\u003c\/h4\u003e\n\u003cp\u003eSinusMax technology provides very high peak surge power (6000W) - well suited to starting difficult loads such as refrigeration compressors, air conditioning units, electric motors, power tools, and switching power supplies for LED and halogen lighting that demand high inrush current at startup.\u003c\/p\u003e\n\u003ch4\u003eVE.Bus Communication - GX Device, Remote Panel, and MK3 Integration\u003c\/h4\u003e\n\u003cp\u003eThe VE.Bus RJ45 port enables connection to a Digital Multi Control or Phoenix Inverter Control panel for remote on\/off and AES mode control, to a Victron GX device for system monitoring and VRM remote access, and to the MK3-USB interface for firmware updates and advanced configuration via VE.Configure.\u003c\/p\u003e\n\u003ch4\u003eParallel and Three-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six Phoenix 24\/3000 units can be connected in parallel for combined output up to 18kVA \/ 14.4kW, and three units configured for three-phase operation - providing a scalable, modular inverter solution for larger off-grid and commercial applications without changing the product family.\u003c\/p\u003e\n\u003ch4\u003eAES and Search (ECO) Mode - Minimised No-Load Consumption\u003c\/h4\u003e\n\u003cp\u003eAES mode reduces no-load power consumption by slightly reducing output voltage under no-load conditions - automatically returning to full output when a load is detected. Search mode turns the inverter off between periodic load checks, delivering the lowest possible no-load draw of just 6W.\u003c\/p\u003e\n\u003ch4\u003eRemote On\/Off Terminal\u003c\/h4\u003e\n\u003cp\u003eA dedicated remote on\/off terminal accepts a low-current control signal - enabling the inverter to be switched on and off via a relay, switch, or BMS output without routing high current through the control switch, and without disconnecting the battery.\u003c\/p\u003e\n\u003ch4\u003eVictronConnect and VE.Configure Compatible\u003c\/h4\u003e\n\u003cp\u003eAll key parameters - including low battery alarm and cut-off thresholds, dynamic cut-off, AES mode settings, output voltage, and output frequency - are configurable via VictronConnect (Windows, macOS, Android) using an MK3-USB interface, or via VE.Configure (Windows only) for full advanced configuration.\u003c\/p\u003e\n\u003ch4\u003eComprehensive Electronic Protections\u003c\/h4\u003e\n\u003cp\u003eOutput short-circuit proof, overtemperature shutdown with automatic restart, low battery voltage alarm and configurable cut-off levels, and over-voltage protection - covering all common fault conditions to protect both the inverter and connected equipment.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003ePIN243020100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e19-33V (24V battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Output Voltage\u003c\/td\u003e\n\u003ctd\u003e120 VAC ± 2%, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd\u003e3000 VA \/ 2400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd\u003e2200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZero Load (normal \/ AES \/ search)\u003c\/td\u003e\n\u003ctd\u003e20W \/ 15W \/ 10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eVE.Bus (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel Operation\u003c\/td\u003e\n\u003ctd\u003eYes - up to 6 units (18kVA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThree-Phase Operation\u003c\/td\u003e\n\u003ctd\u003eYes - 3 units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e−40°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e362 × 258 × 218 mm (14.3 × 10.2 × 8.6 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Inverter-3000VA-120V-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Phoenix-Inverter-3k-120V-(firmware-xxxx4xx)-EN.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125543059705,"sku":"IVV00862","price":1154.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV00862-1.webp?v=1780463646"},{"product_id":"victron-quattro-3kw-12v-230v-50hz","title":"Victron Quattro 12\/3000\/120-50\/50 230V VE.Bus  Inverter\/Charger","description":"\u003cp\u003eThe Victron Quattro 12\/3000\/120-50\/50 230V is a multifunctional inverter\/charger that combines a powerful true sine wave inverter, an adaptive four-stage battery charger, and two independent AC inputs with automatic transfer switching into a single compact aluminium enclosure. Designed for European and international 230V installations, it delivers 3000 VA of continuous inverter output from a 12V battery bank while simultaneously managing two independent AC sources — such as shore power and a generator — with full VE.Bus system integration for comprehensive monitoring, control, and remote management.\u003c\/p\u003e\n\u003cp\u003eThe defining characteristic of the Quattro is its two independent AC inputs with automatic transfer switching — the key distinction from the MultiPlus, which has only one AC input. One input connects to shore power and the other to a generator or secondary grid supply, with the Quattro automatically selecting the active source. Each AC input has its own independently configurable PowerControl current limit, and the Quattro will never connect the two inputs together — making it intrinsically safe for use with two independent AC sources simultaneously present.\u003c\/p\u003e\n\u003cp\u003eThe primary AC output (AC-out-1) provides no-break UPS functionality — transferring to inverter operation in less than 20 milliseconds in the event of a grid or generator failure, fast enough that computers and sensitive electronics continue operating without interruption. The secondary output (AC-out-2) is live only when AC is present on one of the inputs, making it ideal for loads that must not draw from the battery — such as water heaters, washing machines, and other high-consumption appliances.\u003c\/p\u003e\n\u003cp\u003eUp to six Quattro units can be connected in parallel for higher power output, and three units configured for three-phase operation. A split-phase 240V \/ 60Hz output can be achieved using the Victron autotransformer in combination with a single Quattro. Three programmable relays support general alarm, DC undervoltage, and generator start\/stop functions. VE.Bus integration enables full monitoring, configuration, and firmware updates via Victron GX devices, the VRM Online Portal, and the VictronConnect app.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=Xh3V3pMzxgz3XO4s\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTwo Independent AC Inputs with Automatic Transfer Switching\u003c\/h4\u003e\n\u003cp\u003eAccepts two independent AC sources — such as shore power and a generator — and automatically connects to whichever is live. Each input has its own independently configurable PowerControl current limit, and the two inputs are never bridged together, ensuring complete electrical isolation between the two AC sources at all times.\u003c\/p\u003e\n\u003ch4\u003eTrue Sine Wave Inverter — 3000 VA \/ 2400W Continuous\u003c\/h4\u003e\n\u003cp\u003eDelivers a clean 230 VAC ± 2% true sine wave output at 50 Hz (configurable to 60 Hz) with 3000 VA \/ 2400W of continuous power at 25°C and 6000W peak capacity — handling motor startup surges and high-demand loads without distortion.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist — Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply with power drawn from the battery. Once demand drops, surplus AC input is used to recharge the battery — maximising every available watt from shore power or generator connections of any size.\u003c\/p\u003e\n\u003ch4\u003ePowerControl — Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003eAn independently configurable current limit on each AC input monitors all connected loads and automatically reduces battery charging to prevent overloading the shore supply or generator — enabling smaller, more fuel-efficient generators to power larger systems without risk of overload shutdown.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer — Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure the Quattro switches to inverter operation in less than 20 milliseconds — fast enough that computers, communication equipment, and sensitive electronics continue operating without interruption or power cycling.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs — Primary UPS and Auxiliary Non-Critical\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted UPS power. The secondary output (AC-out-2) is live only when AC is present at one of the inputs — preventing non-critical loads such as water heaters and washing machines from discharging the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eFour-Stage Adaptive Battery Charger with Starter Battery Output\u003c\/h4\u003e\n\u003cp\u003eThe 120A adaptive charger automatically adjusts absorption time based on battery discharge depth and condition — keeping absorption short after shallow discharges and extending it after deep discharges. An independent 4A trickle charge output simultaneously maintains a separate starter or generator battery.\u003c\/p\u003e\n\u003ch4\u003eParallel and Three-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six Quattro units can be connected in parallel for higher power output, and three units configured for three-phase operation — enabling systems up to 18kVA \/ 14.4kW from this model. Four sets of three units can be combined for up to 144kW in larger three-phase configurations.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 100.036%; height: 411.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003eQUA123020010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e9.5-17V (12V battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eAC Input Voltage Range\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e187-250 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eAC Inputs\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e2 × independent with automatic transfer switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eMaximum Feed-Through Current\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e2 × 50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e3000 VA \/ 2400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e2200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eContinuous Output Power (65°C)\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e1700W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003ePeak Power\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e93%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e120A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eStarter Battery Trickle Charge\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eAbsorption Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e14.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e13.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eStorage Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e13.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eAuxiliary Output\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e25A (active only when AC source present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eProgrammable Relays\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e3 × (alarm \/ DC undervoltage \/ genset start-stop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e−20°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e19 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 39.5455%; height: 19.6px;\"\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd style=\"width: 57.9947%; height: 19.6px;\"\u003e364 × 295 × 221 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Quattro-3kVA-15kVA-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Quattro-3k-50-50A-230V-(firmware-xxxx4xx)-EN-NL-FR-DE-ES-SE-.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125543092473,"sku":"IVV30214","price":1905.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV30214-1.webp?v=1779707497"},{"product_id":"victron-quattro-5000w-230vac","title":"Victron Quattro 12\/5000\/220-100\/100 230V VE.Bus Inverter\/Charger","description":"\u003cp\u003eThe Victron Quattro 12\/5000\/220-100\/100 230V is a multifunctional inverter\/charger that combines a powerful true sine wave inverter, an adaptive four-stage battery charger, and two independent AC inputs with automatic transfer switching into a single robust aluminium enclosure. Designed for European and international 230V installations, it delivers 5000 VA of continuous inverter output from a 12V battery bank while simultaneously managing two independent AC sources — such as shore power and a generator — with full VE.Bus system integration for comprehensive monitoring, control, and remote management.\u003c\/p\u003e\n\u003cp\u003eThe defining characteristic of the Quattro is its two independent AC inputs with automatic transfer switching — the key distinction from the MultiPlus, which has only one AC input. One input connects to shore power and the other to a generator or secondary grid supply, with the Quattro automatically selecting the active source. Each AC input has its own independently configurable PowerControl current limit of up to 100A, and the Quattro will never connect the two inputs together — making it intrinsically safe for use with two independent AC sources simultaneously present.\u003c\/p\u003e\n\u003cp\u003eThe primary AC output (AC-out-1) provides no-break UPS functionality — transferring to inverter operation in less than 20 milliseconds in the event of a grid or generator failure, fast enough that computers and sensitive electronics continue operating without interruption. The secondary output (AC-out-2) is live only when AC is present on one of the inputs, making it ideal for loads that must not draw from the battery — such as water heaters, washing machines, and other high-consumption appliances.\u003c\/p\u003e\n\u003cp\u003eUp to six Quattro units can be connected in parallel for higher power output, and three units configured for three-phase operation — enabling systems up to 30kVA from this model. Four sets of three units can deliver up to 60kW. Three programmable relays support general alarm, DC undervoltage, and generator start\/stop functions. VE.Bus integration enables full monitoring, configuration, and firmware updates via Victron GX devices, the VRM Online Portal, and the VictronConnect app.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=CduYH57_68VXLeGZ\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTwo Independent AC Inputs with Automatic Transfer Switching\u003c\/h4\u003e\n\u003cp\u003eAccepts two independent AC sources — such as shore power and a generator — and automatically connects to whichever is live. Each input has its own independently configurable PowerControl current limit of up to 100A, and the two inputs are never bridged together, ensuring complete electrical isolation between both AC sources at all times.\u003c\/p\u003e\n\u003ch4\u003eTrue Sine Wave Inverter — 5000 VA \/ 4000W Continuous\u003c\/h4\u003e\n\u003cp\u003eDelivers a clean 230 VAC ± 2% true sine wave output at 50 Hz (configurable to 60 Hz) with 5000 VA \/ 4000W of continuous power at 25°C and 10000W peak capacity — handling motor startup surges and heavy loads without distortion or voltage variation.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist — Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply with power drawn from the battery. Once demand drops, surplus AC input is used to recharge the battery — maximising every available watt from shore power or generator connections of any size.\u003c\/p\u003e\n\u003ch4\u003ePowerControl — Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003eAn independently configurable current limit on each AC input monitors all connected loads and automatically reduces battery charging to prevent overloading the shore supply or generator — enabling smaller, more fuel-efficient generators to power larger systems without risk of overload shutdown.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer — Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure the Quattro switches to inverter operation in less than 20 milliseconds — fast enough that computers, communication equipment, and sensitive electronics continue operating without interruption or power cycling.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs — Primary UPS and Auxiliary Non-Critical\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted UPS power. The secondary output (AC-out-2) is live only when AC is present at one of the inputs — preventing non-critical loads such as water heaters and washing machines from discharging the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eFour-Stage Adaptive Battery Charger — 220A with Starter Battery Output\u003c\/h4\u003e\n\u003cp\u003eThe 220A adaptive charger automatically adjusts absorption time based on battery discharge depth and condition — keeping absorption short after shallow discharges and extending it after deep discharges. An independent 4A trickle charge output simultaneously maintains a separate starter or generator battery.\u003c\/p\u003e\n\u003ch4\u003eParallel and Three-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six Quattro units can be connected in parallel for higher power output, and three units configured for three-phase operation — enabling systems up to 30kVA from this model. Four sets of three units can be combined for up to 60kW in larger three-phase configurations.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eQUA125020000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9.5-17V (12V battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e187-250 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Inputs\u003c\/td\u003e\n\u003ctd\u003e2 × independent with automatic transfer switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Feed-Through Current\u003c\/td\u003e\n\u003ctd\u003e2 × 100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd\u003e5000 VA \/ 4000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd\u003e3700W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (65°C)\u003c\/td\u003e\n\u003ctd\u003e3000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e10000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd\u003e220A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStarter Battery Trickle Charge\u003c\/td\u003e\n\u003ctd\u003e4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage\u003c\/td\u003e\n\u003ctd\u003e14.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd\u003e13.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Voltage\u003c\/td\u003e\n\u003ctd\u003e13.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Output\u003c\/td\u003e\n\u003ctd\u003e50A (active only when AC source present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgrammable Relays\u003c\/td\u003e\n\u003ctd\u003e3 × (alarm \/ DC undervoltage \/ genset start-stop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e−20°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e34 kg (75 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e470 × 350 × 280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Quattro-3kVA-15kVA-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Quattro-5k-8k-10k-15K-100-100A-230V-(firmware-xxxx4xx)-EN-NL-FR-DE-ES-SE-IT.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125543321849,"sku":"IVV30215","price":2968.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV30215-1.webp?v=1779718901"},{"product_id":"victron-lynx-distributer","title":"Victron Lynx Distributor (M10)","description":"\u003cp\u003eThe Victron Lynx Distributor (M10) is a modular, heavy-duty DC busbar module that provides four individually fused and actively monitored connections for batteries, inverters, chargers, and other high-power DC loads. Designed for professional-grade 12V, 24V, and 48V systems requiring M10 busbar interconnections, it serves as a fused distribution hub rated for a continuous 1000A through the busbar.\u003c\/p\u003e\n\u003cp\u003eSmart onboard electronics actively monitor each of the four positive connections, with an LED status panel that immediately alerts you if a fuse is blown - a green light confirms normal operation, a red LED indicates a blown or missing fuse. When integrated into a larger Victron system with a Lynx Smart BMS via the included RJ10 cable, it transmits real-time fuse and connection status to the VictronConnect app, a GX Touch screen, and the VRM portal.\u003c\/p\u003e\n\u003cp\u003eThe unit's M10 joint bolts make it directly compatible with other M10 Lynx modules - the Lynx Power In, Lynx Shunt VE.Can, and Lynx Smart BMS - to form one continuous busbar (internal cable and fuse connections themselves use M8 studs). Up to four Lynx Distributor units can be daisy-chained and addressed via onboard DIP switches to a single Lynx Smart BMS, expanding a system to 16 individually monitored fused circuits.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\u003ch4\u003eFour Fused and Monitored DC Connections\u003c\/h4\u003e\n\u003cp\u003eThe positive busbar accommodates up to four MEGA fuses (sold separately) to protect individual circuits for batteries, chargers, or inverters.\u003c\/p\u003e\n\u003ch4\u003eActive LED Visual Alerts\u003c\/h4\u003e\n\u003cp\u003eA central power LED and four individual circuit LEDs give instant at-a-glance diagnostics - green for normal operation, red for a blown or missing fuse.\u003c\/p\u003e\n\u003ch4\u003eM10 Busbar Joint Connections\u003c\/h4\u003e\n\u003cp\u003eHeavy-duty M10 connection bolts at the joints make this module directly compatible with other M10 Lynx modules, forming one continuous busbar.\u003c\/p\u003e\n\u003ch4\u003eDigital Communication to Lynx Smart BMS\u003c\/h4\u003e\n\u003cp\u003eConnects to a Lynx Smart BMS via the included 40cm RJ10 cable, sending instant fuse-blown or connection-lost alarms to VictronConnect, a GX Touch screen, and the VRM portal.\u003c\/p\u003e\n\u003ch4\u003eMassive Power Capacity\u003c\/h4\u003e\n\u003cp\u003eHigh-conductivity copper busbars are rated for a continuous 1000A current, keeping voltage drop and heat generation to a minimum.\u003c\/p\u003e\n\u003ch4\u003eScalable to 16 Fused Circuits\u003c\/h4\u003e\n\u003cp\u003eUp to four Lynx Distributor units can be daisy-chained to a single Lynx Smart BMS, expanding a system to 16 individually monitored circuits.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous current rating\u003c\/td\u003e\n\u003ctd\u003e1000 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating voltage range\u003c\/td\u003e\n\u003ctd\u003e9-60 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported system voltages\u003c\/td\u003e\n\u003ctd\u003e12V, 24V, 48V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFused outlets\u003c\/td\u003e\n\u003ctd\u003e4x MEGA fuse positions (fuses sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBusbar joint connections\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal studs (cables\/fuses)\u003c\/td\u003e\n\u003ctd\u003eM8 (accepts lugs up to 70mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003eMax. 100 mA (all LEDs active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg (4.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e290 x 170 x 80 mm (11.4 x 6.7 x 3.1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\u003cdiv\u003e\n\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lynx-Distributor.pdf\" style=\"display:flex;align-items:center;justify-content:space-between;gap:16px;border:1px solid #e2e2e2;border-radius:8px;padding:12px 16px;margin-bottom:10px;text-decoration:none;color:inherit;\" target=\"_blank\"\u003e\u003cspan style=\"display:flex;align-items:center;gap:12px;min-width:0;\"\u003e\u003cspan style=\"width:36px;height:36px;flex-shrink:0;background:#eef2f8;border-radius:6px;display:flex;align-items:center;justify-content:center;\"\u003e\u003csvg fill=\"none\" height=\"18\" style=\"display:block;\" viewbox=\"0 0 24 24\" width=\"18\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003cpath d=\"M14 2v6h6\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003cspan style=\"display:flex;flex-direction:column;min-width:0;\"\u003e\u003cspan style=\"font-weight:600;color:#111827;\"\u003eDrawing with dimensions\u003c\/span\u003e\u003cspan style=\"font-size:13px;color:#6b7280;\"\u003ePDF Document\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color:#3b6fd6;font-weight:500;white-space:nowrap;\"\u003eOpen\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lynx_Distributor\/24531-Lynx_Distributor_Manual-pdf-en.pdf\" style=\"display:flex;align-items:center;justify-content:space-between;gap:16px;border:1px solid #e2e2e2;border-radius:8px;padding:12px 16px;margin-bottom:10px;text-decoration:none;color:inherit;\" target=\"_blank\"\u003e\u003cspan style=\"display:flex;align-items:center;gap:12px;min-width:0;\"\u003e\u003cspan style=\"width:36px;height:36px;flex-shrink:0;background:#eef2f8;border-radius:6px;display:flex;align-items:center;justify-content:center;\"\u003e\u003csvg fill=\"none\" height=\"18\" style=\"display:block;\" viewbox=\"0 0 24 24\" width=\"18\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003cpath d=\"M14 2v6h6\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003cspan style=\"display:flex;flex-direction:column;min-width:0;\"\u003e\u003cspan style=\"font-weight:600;color:#111827;\"\u003eProduct Manual\u003c\/span\u003e\u003cspan style=\"font-size:13px;color:#6b7280;\"\u003ePDF Document\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color:#3b6fd6;font-weight:500;white-space:nowrap;\"\u003eOpen\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125543649529,"sku":"BMV17506","price":232.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BMV17506-1.jpg?v=1784261121"},{"product_id":"victron-multiplus-ii-3000-120v","title":"Victron MultiPlus-II 3000 120V","description":"\u003cp\u003eThe Victron MultiPlus-II 3000VA 120V is the most advanced multifunctional inverter\/charger in the Victron 3kVA range - combining the proven MultiPlus inverter\/charger platform with Energy Storage System (ESS) functionality, external current sensor capability, and built-in anti-islanding protection in a single compact unit. Available in four variants for the North American market - 12\/3000\/120-50 120V, 12\/3000\/120-50 2x120V, 24\/3000\/70-50 120V, and 24\/3000\/70-50 2x120V - all models deliver 3000 VA of continuous inverter output and include a high-speed 50A AC transfer switch, two AC outputs, PowerAssist, PowerControl, and full VE.Bus system integration. Certified to UL 458 for North American installations.\u003c\/p\u003e\n\u003cp\u003eThe 2x120V variants (12V and 24V) are designed specifically for North American 50A split-phase shore power and RV applications, accepting both legs of a 120\/240V split-phase supply. The L1 output provides no-break UPS functionality with a transfer time of less than 18 milliseconds, while the L2 output transfers in approximately 40 milliseconds. In inverter mode both output lines deliver 120VAC - preventing 240V loads such as water heaters and air conditioners from drawing from the battery. The single-phase 120V variants (12V and 24V) operate on single-phase 90–140V AC input and output, sharing the same full feature set including PowerAssist, ESS compatibility, and parallel\/three-phase scalability.\u003c\/p\u003e\n\u003cp\u003eThe external current sensor input - standard on all MultiPlus-II models - extends PowerControl and PowerAssist to 100A, enabling self-consumption optimisation in ESS and grid-tied solar installations without requiring a separate energy meter. The built-in anti-islanding protection meets grid connection requirements across an increasingly long list of country approvals, making the MultiPlus-II the correct choice for any grid-connected ESS installation. A programmable relay supports general alarm, DC undervoltage, or generator start\/stop functions.\u003c\/p\u003e\n\u003cp\u003eFull system integration is available via VE.Bus - connecting to Victron GX devices (Cerbo GX, Ekrano GX), the VRM Online Portal, and the VictronConnect app for local and remote monitoring, configuration, firmware updates, and alarm management. System scalability is extensive: up to six units can be connected in parallel, three units configured for three-phase operation, or two units stacked for split-phase output - enabling systems from 3kVA to over 18kVA from a single model family.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/nU5yUY6VhIU?si=OZGh4bcPmmvoQoiU\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eTrue Sine Wave Inverter-3000 VA \/ 2400W Continuous\u003c\/h4\u003e\n\u003cp\u003eDelivers a clean 120 VAC ± 2% true sine wave output at 60 Hz with 3000 VA \/ 2400W continuous power at 25°C and 5500W peak - handling motor startup surges and high-demand loads without distortion or voltage drop across all four variants.\u003c\/p\u003e\n\u003ch4\u003ePowerAssist-Boosting Shore or Generator Power\u003c\/h4\u003e\n\u003cp\u003eWhen connected AC power is insufficient for the connected loads, PowerAssist automatically supplements the supply with power drawn from the battery - adding up to 25A (3000 VA \/ 120V) to the available AC input current. Once demand drops, the surplus input is used to recharge the battery, maximising every available watt from the AC source.\u003c\/p\u003e\n\u003ch4\u003ePowerControl-Preventing AC Source Overload\u003c\/h4\u003e\n\u003cp\u003eA maximum AC input current limit is set on the MultiPlus-II, which then monitors all connected loads and automatically reduces battery charging as needed to prevent the shore supply or generator from being overloaded - enabling smaller generators to safely power larger systems.\u003c\/p\u003e\n\u003ch4\u003eExternal Current Sensor-100A PowerControl and PowerAssist\u003c\/h4\u003e\n\u003cp\u003eThe optional 100A:50mA external current sensor (CTR110000500) extends PowerControl and PowerAssist to monitor and manage the full 100A grid connection - enabling self-consumption optimisation in ESS installations and more precise load management than internal current sensing alone provides.\u003c\/p\u003e\n\u003ch4\u003eNo-Break UPS Transfer-Under 20 Milliseconds\u003c\/h4\u003e\n\u003cp\u003eIn the event of shore power or generator failure the MultiPlus-II switches to inverter operation in less than 20 milliseconds on the main output - fast enough that computers, communication equipment, and sensitive electronics continue to operate without interruption. On the 2x120V models the L2 output transfers in approximately 40 milliseconds.\u003c\/p\u003e\n\u003ch4\u003eTwo AC Outputs-Primary UPS and Auxiliary Non-Critical\u003c\/h4\u003e\n\u003cp\u003eThe primary output (AC-out-1) provides uninterrupted UPS power. The secondary output (AC-out-2) is live only when an AC source is present - ideal for non-critical loads such as water heaters, EV chargers, and 240V appliances that should not draw from the battery when running on inverter power.\u003c\/p\u003e\n\u003ch4\u003eESS Functionality and Anti-Islanding\u003c\/h4\u003e\n\u003cp\u003eThe MultiPlus-II is the key component in a Victron Energy Storage System, providing the flexibility to combine with MPPT solar chargers or grid-tie PV inverters. Built-in anti-islanding protection and an increasingly long list of country certifications make it suitable for grid-connected ESS installations in residential, commercial, and marine applications.\u003c\/p\u003e\n\u003ch4\u003eParallel, Split-Phase, and Three-Phase Scalability\u003c\/h4\u003e\n\u003cp\u003eUp to six MultiPlus-II units can be connected in parallel for higher power output. Three units can be configured for three-phase operation, and two units stacked for 120\/240V split-phase output - enabling systems from 3kVA to over 18kVA from a single model family without any additional power electronics.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\/3000\/120-50 120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\/3000\/120-50 2x120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/3000\/70-50 120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/3000\/70-50 2x120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9.5-17V\u003c\/td\u003e\n\u003ctd\u003e9.5-17V\u003c\/td\u003e\n\u003ctd\u003e19-33V\u003c\/td\u003e\n\u003ctd\u003e19-33V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input (Single Phase)\u003c\/td\u003e\n\u003ctd\u003e90-140 VAC, 45-65 Hz\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e90-140 VAC, 45-65 Hz\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input (Split Phase)\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e180-280 VAC, 45-65 Hz\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e180-280 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (25°C)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e3000 VA \/ 2400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (40°C)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e2200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power (65°C)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e1700W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e5500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e93%\u003c\/td\u003e\n\u003ctd\u003e93%\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Battery Charge Current\u003c\/td\u003e\n\u003ctd\u003e120A\u003c\/td\u003e\n\u003ctd\u003e120A\u003c\/td\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Transfer Switch\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Current Sensor\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e100A (optional CTR110000500)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eUL 458\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eIP22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e42 Lb\u003c\/td\u003e\n\u003ctd\u003e48 Lb\u003c\/td\u003e\n\u003ctd\u003e42 Lb\u003c\/td\u003e\n\u003ctd\u003e48 Lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e(22.8 x 10.9 x 5.8 inch)\u003c\/td\u003e\n\u003ctd\u003e(23 x 11 x 6 inch)\u003c\/td\u003e\n\u003ctd\u003e(22.8 x 10.9 x 5.8 Inch)\u003c\/td\u003e\n\u003ctd\u003e(23 x 11 x 6 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-MultiPlus-II-120Va-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/MultiPlus-II_120V\/32424-MultiPlus-II___Quattro-II-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual - 120V Models\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/MultiPlus-II_2x120V\/32424-MultiPlus-II___Quattro-II-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual - 2x120V Models\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"MultiPlus-II 24\/3000\/70-50 120V (UL 458)","offer_id":48429024608505,"sku":"IVV30221","price":997.05,"currency_code":"USD","in_stock":true},{"title":"MultiPlus-II 24\/3000\/70-50 2x120V (UL 458)","offer_id":48429024641273,"sku":"IVV30222","price":1145.8,"currency_code":"USD","in_stock":true},{"title":"MultiPlus-II 12\/3000\/120-50 120V (UL 458)","offer_id":48429024542969,"sku":"IVV30225","price":1006.4,"currency_code":"USD","in_stock":false},{"title":"MultiPlus-II 12\/3000\/120-50 2x120V (UL 458)","offer_id":48448045220089,"sku":"IVV30223","price":1088.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV30221-1.webp?v=1780507727"},{"product_id":"victron-globallink-520","title":"Victron GlobalLink 520","description":"\u003cp\u003eThe Victron GlobalLink 520 is a compact cellular IoT gateway that connects VE.Direct-equipped Victron products and compatible Victron Smart devices directly to the Victron Remote Management (VRM) portal via 4G LTE-M — without requiring a GX device, router, or local network infrastructure. Pre-configured and ready to use straight from the box, it enables remote monitoring of battery voltage, state of charge, solar harvest, power consumption, and temperature from anywhere in the world through the free VRM portal or VictronConnect app.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the GlobalLink 520 is a pre-installed and pre-paid nano SIM card provided by cellular operator 1nce, which includes five years of 4G LTE-M connectivity at no additional cost — eliminating the need to purchase, configure, or maintain a separate SIM card subscription for the life of the included data plan. LTE-M (LTE Cat-M1) is a low-power IoT cellular standard designed to connect devices to existing 4G towers while consuming minimal energy, supporting roaming and handovers for use in moving vehicles such as campervans when paired with an optional external antenna.\u003c\/p\u003e\n\u003cp\u003eTwo isolated VE.Direct ports allow direct wired connection of up to two VE.Direct devices — such as a SmartSolar MPPT charge controller and a BMV battery monitor or SmartShunt — with data transmitted to VRM every 15 minutes for critical parameters and every 24 hours for all available data. Up to 10 additional Victron Smart products can be connected wirelessly via Bluetooth Low Energy (BLE) Instant Readout, without needing a wired connection. RuuviTag and RuuviTag Pro environmental sensors are also supported via BLE, making temperature, humidity, and atmospheric pressure data available in VRM alongside energy system data.\u003c\/p\u003e\n\u003cp\u003eTwo digital inputs — which also function as pulse counters at up to 1000Hz — and a remotely controllable relay complete the GlobalLink 520's IO capability. A built-in internal antenna handles the majority of installations, with an SMA connector and antenna selection switch allowing an optional external or outdoor antenna to be connected for improved reception in shielded or remote locations. The VictronConnect app provides Bluetooth-based configuration and monitoring of the device itself.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003e5 Years of Pre-Paid 4G LTE-M Connectivity — No Subscription Required\u003c\/h4\u003e\n\u003cp\u003eThe pre-installed and pre-paid 1nce nano SIM card provides five full years of 4G LTE-M cellular connectivity included in the purchase price — with no monthly fees, SIM card purchases, or subscription management required. Custom SIM cards from other operators are also supported for installations beyond the five-year period or in regions requiring a specific carrier.\u003c\/p\u003e\n\u003ch4\u003eTwo Isolated VE.Direct Ports\u003c\/h4\u003e\n\u003cp\u003eTwo isolated VE.Direct ports enable direct wired connection of up to two VE.Direct devices — such as SmartSolar and BlueSolar MPPT charge controllers, BMV battery monitors, SmartShunts, Phoenix inverters, and Blue Smart IP43 chargers — transmitting their data to VRM at 15-minute and 24-hour intervals.\u003c\/p\u003e\n\u003ch4\u003eUp to 10 Victron Smart Devices via Bluetooth BLE\u003c\/h4\u003e\n\u003cp\u003eIn addition to the two wired VE.Direct devices, up to 10 compatible Victron Smart products can be connected wirelessly via Bluetooth Low Energy Instant Readout — expanding the number of monitored devices well beyond what the physical VE.Direct ports alone allow, without additional wiring or hardware.\u003c\/p\u003e\n\u003ch4\u003eRuuviTag Environmental Sensor Support\u003c\/h4\u003e\n\u003cp\u003eRuuviTag and RuuviTag Pro sensors connect via BLE and are configured through VictronConnect, making temperature, humidity, and atmospheric pressure data from the sensors directly available in the VRM portal — ideal for monitoring battery compartment conditions, refrigerators, and environmental areas on vessels and in off-grid installations.\u003c\/p\u003e\n\u003ch4\u003eTwo Digital Inputs and Remote Relay\u003c\/h4\u003e\n\u003cp\u003eTwo digital inputs — which simultaneously function as pulse counters with a maximum frequency of 1000Hz — enable monitoring of door contacts, alarms, flow meters, and energy meters. A remotely controllable relay can be switched on or off from VRM, with changes propagated at the next scheduled data transmission (within 15 minutes under normal conditions).\u003c\/p\u003e\n\u003ch4\u003eInternal and External Antenna Options\u003c\/h4\u003e\n\u003cp\u003eA built-in internal antenna provides worldwide LTE-M coverage for most fixed installations. An SMA connector and top-mounted antenna selection switch enable an optional external puck antenna or wall-mount antenna (sold separately) to be connected for improved reception in vehicles, metal enclosures, and remote or low-signal locations.\u003c\/p\u003e\n\u003ch4\u003eVictronConnect App Configuration and Monitoring\u003c\/h4\u003e\n\u003cp\u003eBuilt-in Bluetooth enables quick connection and configuration via the VictronConnect app on iOS and Android — including signal strength monitoring, SIM PIN and APN settings for custom SIM cards, and live data from connected VE.Direct and BLE devices — all without requiring access to the VRM portal.\u003c\/p\u003e\n\u003ch4\u003eVRM Data Logging — Free and Unlimited\u003c\/h4\u003e\n\u003cp\u003eAll data transmitted by the GlobalLink 520 is stored indefinitely in the VRM portal at no cost — providing unlimited historical logging of battery voltage, state of charge, solar harvest, power consumption, temperature, and other system parameters for analysis, reporting, and alarm management from any internet-connected device.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/8BPNQWEBkk4?si=djUNb5XzhJ8yV7Gg\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e8-70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Draw (Bluetooth enabled, relay open)\u003c\/td\u003e\n\u003ctd\u003e12V: 50mA | 24V: 26mA | 48V: 14mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCellular Technology\u003c\/td\u003e\n\u003ctd\u003e4G LTE-M (LTE Cat-M1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Direct Ports\u003c\/td\u003e\n\u003ctd\u003e2 (always isolated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBluetooth Smart Devices\u003c\/td\u003e\n\u003ctd\u003eUp to 10 via BLE Instant Readout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Inputs \/ Pulse Counters\u003c\/td\u003e\n\u003ctd\u003e2 (max 1000Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay\u003c\/td\u003e\n\u003ctd\u003e1 × remotely controllable via VRM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna\u003c\/td\u003e\n\u003ctd\u003eInternal + SMA connector for optional external antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter dimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e123 x 67 x 23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-20 to +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-GlobalLink-520-530-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/GlobalLink_520\/19329-GlobalLink_520___530-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125544763641,"sku":"GLV10520","price":216.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-GLV10520-1.webp?v=1779213411"},{"product_id":"victron-skylla-i-control-gx","title":"Victron Skylla-i Control GX","description":"\u003cp\u003eThe Victron Skylla-i Control GX is a dedicated remote control panel designed to work with all Victron Skylla-i battery charger models. Communicating via the VE.Can bus over a standard UTP cable with RJ45 connectors, it provides a clear and intuitive interface for monitoring charger status and adjusting key charge parameters — including input current limit — directly from the panel without needing access to the charger unit itself.\u003c\/p\u003e\n\u003cp\u003eThe panel connects to the Skylla-i charger using a regular UTP (Unshielded Twisted Pair) cable with RJ45 connectors. Both the charger and the control panel have two RJ45 sockets that are internally connected, so the cable can be connected to either socket. Two VE.Can RJ45 bus terminators are supplied with the panel and must be fitted at each end of the VE.Can network for correct communication. The panel is powered entirely from the charger via the VE.Can bus — no separate power supply is required.\u003c\/p\u003e\n\u003cp\u003eDuring operation, status LEDs on the panel display the current charge phase — Bulk, Absorption, Float, manual or automatic equalisation, power supply mode, or alarm — at a glance. The rotary knob allows the user to cycle through and monitor live charge current, battery voltage, input current, and input current limit, and to adjust the input current limit directly from the panel. LED brightness is managed automatically by a built-in ambient light sensor, reducing brightness in low-light conditions for comfortable viewing and reduced power consumption.\u003c\/p\u003e\n\u003cp\u003eMultiple Skylla-i Control GX panels can be connected to a single charger or to a group of synchronised parallel-connected Skylla-i chargers, and multiple Skylla-i chargers can share the same VE.Can network — with device instance configuration via any NMEA 2000 network tool when required. Available in straight and 90-degree right-angle RJ45 connector versions to suit different installation panel orientations.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eRemote On\/Off and Input Current Limit Control\u003c\/h4\u003e\n\u003cp\u003eThe Skylla-i charger can be switched on and off directly from the panel using the on\/off button, and the input current limit can be adjusted by pressing and turning the rotary knob — providing complete remote charge control without requiring access to the charger unit.\u003c\/p\u003e\n\u003ch4\u003eReal-Time Charge Status Display\u003c\/h4\u003e\n\u003cp\u003eStatus LEDs display the current charge phase in real time — Bulk, Absorption, Float, automatic and manual equalisation, power supply mode, and alarm — giving an immediate overview of charger operation at a glance from anywhere the panel is mounted.\u003c\/p\u003e\n\u003ch4\u003eLive Parameter Monitoring via Rotary Knob\u003c\/h4\u003e\n\u003cp\u003eTurning the rotary knob cycles through four live parameters displayed on the panel: charge current, battery voltage, input current, and input current limit — with values shown in SI units (Ampere or Volt) to one decimal place.\u003c\/p\u003e\n\u003ch4\u003eVE.Can Bus Communication\u003c\/h4\u003e\n\u003cp\u003eConnects to the Skylla-i charger via a standard UTP cable with RJ45 connectors over the VE.Can bus — the same CAN bus standard used by NMEA 2000 marine networks. Two RJ45 VE.Can terminators are supplied with the panel and must be placed at each end of the VE.Can network.\u003c\/p\u003e\n\u003ch4\u003eBus-Powered — No Separate Power Supply Required\u003c\/h4\u003e\n\u003cp\u003eThe Skylla-i Control GX is powered entirely from the charger via the VE.Can bus, eliminating the need for a separate power connection at the panel — simplifying installation and reducing wiring complexity.\u003c\/p\u003e\n\u003ch4\u003eAutomatic LED Brightness Control\u003c\/h4\u003e\n\u003cp\u003eA built-in ambient light sensor automatically adjusts LED brightness based on ambient light levels — reducing brightness in low-light conditions for a more comfortable viewing experience and lower power consumption during overnight or low-light operation.\u003c\/p\u003e\n\u003ch4\u003eSupports Multiple Chargers and Panels on One Network\u003c\/h4\u003e\n\u003cp\u003eMultiple Skylla-i Control GX panels can be connected to a single charger or to a group of synchronised parallel Skylla-i chargers on the same VE.Can network. Device instance configuration via a NMEA 2000 network tool (e.g. Actisense or Maretron) is required when multiple chargers on the same network are charging different battery banks.\u003c\/p\u003e\n\u003ch4\u003eAvailable in Straight and 90-Degree Right-Angle RJ45 Versions\u003c\/h4\u003e\n\u003cp\u003eOffered in two connector configurations — straight RJ45 and 90-degree right-angle RJ45 — to suit different panel cut-out orientations and cable routing requirements in marine, RV, and off-grid electrical panel installations.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chargers\u003c\/td\u003e\n\u003ctd\u003eAll Victron Skylla-i models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Bus\u003c\/td\u003e\n\u003ctd\u003eVE.Can (CAN bus \/ NMEA 2000 compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eUTP cable with RJ45 connectors (straight or 90° right-angle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Terminators Supplied\u003c\/td\u003e\n\u003ctd\u003e2 × RJ45 VE.Can terminators included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eBus-powered from Skylla-i charger via VE.Can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMonitored Parameters\u003c\/td\u003e\n\u003ctd\u003eCharge current, battery voltage, input current, input current limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e65 × 120 × 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Skylla-i-Control-GX-EN-NL-FR-DE-ES.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125545058553,"sku":"BCV60698","price":143.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV60698-1.webp?v=1779033945"},{"product_id":"victron-lynx-class-t-power-in-m10","title":"Victron Lynx Class-T Power In (M10)","description":"\u003cp\u003eThe Victron Lynx Class-T Power In (M10) is a high-current modular busbar unit designed to connect and fuse up to two strings of lithium batteries within the Victron Lynx Distribution System. Featuring integrated positive and negative busbars with M10 connections, two Class-T fuse slots, and a dedicated DC system grounding connection, it provides a safe, compact, and scalable battery input point for high-capacity 12V, 24V, and 48V energy storage systems.\u003c\/p\u003e\n\u003cp\u003eThe Lynx Class-T Power In accepts Class-T fuses in 225A, 250A, 350A, and 400A ratings (sold separately), providing a maximum fused input current of 800A from two battery strings. The busbar itself is rated for 1000A continuous, equivalent to 12kW at 12V, 24kW at 24V, or 48kW at 48V — making it suitable for demanding off-grid, marine, and large-scale renewable energy installations. Additional Lynx Class-T Power In modules can be interconnected side by side to accommodate three or more battery strings without compromising the modular system layout.\u003c\/p\u003e\n\u003cp\u003eAs a core component of the Victron Lynx Distribution System, the Lynx Class-T Power In connects directly to all other M10 Lynx modules — including the Lynx Smart BMS, Lynx Distributor, and Lynx Shunt VE.Can — using M10 interconnecting bolts, forming a continuous positive and negative busbar across the entire assembly. The modular snap-together design allows the system to be configured and expanded to suit any installation, from a simple two-battery bank to a large multi-string system with battery management and fused load distribution.\u003c\/p\u003e\n\u003cp\u003eThe robust ABS enclosure is rated IP20 and operates across a temperature range of -40°C to +60°C. The tinned copper busbars (8 × 30mm) ensure low-resistance, long-term connections, and the unit can be mounted in any orientation with included stickers for correct label orientation when mounted inverted. Cable lugs up to 120mm² or 3\/8\"-4\/0 AWG are accepted on all M10 connection studs, tightened to 33Nm.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eDual Class-T Fuse Slots for High-Current Battery Protection\u003c\/h4\u003e\n\u003cp\u003eTwo 3\/8\" Class-T fuse slots accept fuses rated 225A, 250A, 350A, or 400A (sold separately), protecting each individual battery string with Class-T high interrupt current fusing. The maximum fused input current per module is 800A (2 × 400A), with the overall busbar rated to 1000A continuous.\u003c\/p\u003e\n\u003ch4\u003eM10 Busbar Connections for Maximum Current Capacity\u003c\/h4\u003e\n\u003cp\u003eAll DC battery and busbar connections use M10 studs rated for cable lugs up to 120mm² or 3\/8\"-4\/0 AWG, tightened to 33Nm — providing robust, low-resistance terminations suitable for the full 1000A continuous busbar rating across 12V, 24V, and 48V systems.\u003c\/p\u003e\n\u003ch4\u003eModular Lynx Distribution System Integration\u003c\/h4\u003e\n\u003cp\u003eConnects directly and seamlessly to all other M10 Lynx modules — Lynx Smart BMS, Lynx Distributor, and Lynx Power In — forming a continuous positive and negative busbar assembly. Multiple Lynx Class-T Power In modules can be chained together to accommodate three or more battery strings in a single integrated distribution system.\u003c\/p\u003e\n\u003ch4\u003eIntegrated DC System Ground Connection\u003c\/h4\u003e\n\u003cp\u003eA dedicated ground connection point is built into the Lynx Class-T Power In, allowing the DC system to be grounded at a single defined point within the Lynx assembly — simplifying grounding compliance and reducing the need for additional external grounding hardware.\u003c\/p\u003e\n\u003ch4\u003e1000A Continuous Current Rating\u003c\/h4\u003e\n\u003cp\u003eThe tinned copper busbar (8 × 30mm cross-section) is rated for 1000A continuous at system voltages from 9 to 60VDC — equivalent to 12kW at 12V, 24kW at 24V, and 48kW at 48V — making it suitable for the largest Victron inverter\/charger systems and high-capacity battery banks.\u003c\/p\u003e\n\u003ch4\u003eFlexible Mounting in Any Orientation\u003c\/h4\u003e\n\u003cp\u003eThe Lynx Class-T Power In can be mounted in any orientation — horizontal, vertical, or inverted — with included orientation stickers ensuring labels remain legible regardless of mounting direction. Five 5mm mounting holes are provided for wall, panel, or DIN mounting.\u003c\/p\u003e\n\u003ch4\u003eCompatible with Class-T Fuses in Four Current Ratings\u003c\/h4\u003e\n\u003cp\u003eAccepts Class-T fuses in 225A, 250A, 350A, and 400A ratings from standard Class-T fuse manufacturers. Class-T fuses provide an extremely high interrupt current rating, making them the preferred fuse type for lithium battery systems where short-circuit currents can be very high. Fuses are sold separately and are not supplied by Victron.\u003c\/p\u003e\n\u003ch4\u003eRobust ABS Enclosure — IP20 Rated\u003c\/h4\u003e\n\u003cp\u003eThe durable ABS enclosure is rated IP20 for indoor installation protection and operates reliably across a temperature range of -40°C to +60°C, making it suitable for installation in battery compartments, marine engine rooms, and off-grid electrical enclosures.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 99.9677%; height: 195.909px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eVoltage Range\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e9-60 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e1000A continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eMaximum Fused Input Current\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e800A (2 × 400A Class-T fuses)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eCompatible Class-T Fuse Ratings\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e225A \/ 250A \/ 350A \/ 400A (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eBusbar Connection\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eFuse Connection\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e-40°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e2.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 41.6208%; height: 19.5909px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd style=\"width: 56.1468%; height: 19.5909px;\"\u003e279 × 169 × 97 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lynx_Class-T_Power_In\/165891-Lynx_Class-T_Power_In-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125545222393,"sku":"BMV17500","price":187.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BMV17500-1.webp?v=1779003022"},{"product_id":"victron-lynx-smart-bms","title":"Victron Lynx Smart BMS 500\/1000 NG (M10)","description":"\u003cp\u003eThe Victron Lynx Smart BMS NG is the most advanced and feature-rich Battery Management System available for Victron Lithium NG batteries, available in 500A (M10) and 1000A (M10) versions. Designed as a dedicated BMS for Lithium NG batteries with nominal voltages of 12.8V, 25.6V, and 51.2V, it supports up to 50 batteries per system — delivering a maximum energy storage of 192 kWh in a 12V system and up to 384 kWh in a 24V or 48V system. Up to five Lynx Smart BMS NG units can be paralleled for further capacity expansion and system redundancy.\u003c\/p\u003e\n\u003cp\u003eAt its core, the Lynx Smart BMS NG uses a high-current main safety contactor — rated 500A continuous (600A peak) or 1000A continuous (1200A peak) — as a fallback safety mechanism and remote-controllable main system switch. A built-in pre-charge circuit prevents high inrush currents when the contactor closes against capacitive loads such as inverters and inverter\/chargers — eliminating the need for any external pre-charge hardware. The BMS monitors all individual battery cells via M8 BTV cables, with ATC and ATD contacts providing primary charge and discharge control independent of the contactor.\u003c\/p\u003e\n\u003cp\u003eDVCC (Distributed Voltage and Current Control) closed-loop integration via a connected GX device automatically controls compatible Victron inverter\/chargers, Orion XS DC-DC battery chargers, and MPPT solar charge controllers — setting charge voltages and currents automatically based on live cell data without additional wiring or manual algorithm configuration. A built-in battery monitor tracks state of charge, current, voltage, power, historical data, and cell voltages and temperatures in real time, viewable via Bluetooth in VictronConnect, on a connected GX device, and through the VRM remote monitoring portal.\u003c\/p\u003e\n\u003cp\u003eThe AUX output provides up to 1.1A at system voltage to keep a connected GX device powered for up to five minutes after a low cell voltage shutdown event — preserving remote monitoring and communications until the battery is recharged. A programmable SPDT relay supports alarm output or alternator ATC (ignition wire) control. VE.Can communication via RJ45 enables full GX device integration, and NMEA 2000 integration is supported via a VE.Can to NMEA 2000 Micro-C cable for marine MFD glass bridge applications.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eHigh-Current Safety Contactor — 500A or 1000A\u003c\/h4\u003e\n\u003cp\u003eThe main safety contactor provides a secondary hardware-level fallback to disconnect the battery bank if primary BMS controls (ATC, ATD, DVCC) fail to interrupt charging or discharging when required. Rated 500A continuous with 600A peak (5 minutes) or 1000A continuous with 1200A peak (5 minutes) depending on model — and also functions as a remote-controllable main system on\/off switch via VictronConnect, a GX device, or the remote on\/off terminals.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Pre-Charge Circuit\u003c\/h4\u003e\n\u003cp\u003eAn integrated pre-charge circuit charges capacitive loads — such as the DC bus capacitors of inverters and inverter\/chargers — before the main contactor closes, preventing the high inrush currents that would otherwise stress the battery, wiring, and connected equipment. External pre-charge devices are not required.\u003c\/p\u003e\n\u003ch4\u003eDVCC Closed-Loop Control for Victron Devices\u003c\/h4\u003e\n\u003cp\u003eVia a connected GX device, DVCC automatically controls compatible Victron inverter\/chargers, Orion XS DC-DC battery chargers, and MPPT solar charge controllers — setting precise charge voltages and currents based on live cell data. Bulk, Absorption, and Float charging algorithms are replaced by direct cell-level voltage and temperature control, with no additional wiring required for DVCC-compatible devices.\u003c\/p\u003e\n\u003ch4\u003eATC and ATD Primary Control Contacts\u003c\/h4\u003e\n\u003cp\u003eThe Allow-to-Charge (ATC) contact is opened to stop charging at high cell voltage or low cell temperature. The Allow-to-Discharge (ATD) contact is opened to stop discharging at low cell voltage — providing primary BMS protection for chargers and loads wired to these contacts, independent of and prior to the main safety contactor.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Battery Monitor with Full Data Reporting\u003c\/h4\u003e\n\u003cp\u003eAn integrated shunt and battery monitor provides real-time state of charge, voltage, current, power, time to go, historical data, and individual cell voltages and temperatures — accessible via Bluetooth in VictronConnect, on a GX device display, and through the VRM remote monitoring portal for both local and remote system visibility.\u003c\/p\u003e\n\u003ch4\u003eAUX Power Output — Keeps GX Device Alive After Shutdown\u003c\/h4\u003e\n\u003cp\u003eThe AUX output supplies up to 1.1A at system voltage to power a connected GX device for up to five minutes after a low cell voltage BMS shutdown event — preserving VRM connectivity and remote diagnostics capability until the battery is recharged. The AUX port shuts down automatically if no charge voltage is detected within five minutes of a low voltage event.\u003c\/p\u003e\n\u003ch4\u003eVE.Can, NMEA 2000, and Bluetooth Connectivity\u003c\/h4\u003e\n\u003cp\u003eVE.Can (RJ45) connects the BMS to a GX device for full local and remote monitoring via VRM. NMEA 2000 integration for marine MFD glass bridge display is supported via a VE.Can to NMEA 2000 Micro-C cable. Built-in Bluetooth enables configuration, monitoring, and control via VictronConnect with Instant Readout for at-a-glance status without a full connection.\u003c\/p\u003e\n\u003ch4\u003eSupports Up to 4 Lynx Distributors with Fuse Monitoring\u003c\/h4\u003e\n\u003cp\u003eUp to four Lynx Distributor M10 modules can be connected to the BMS via RJ10 cables, with the fuse status of all 16 fuse positions monitored digitally — raising alarms in VictronConnect and on GX devices when any fuse blows, and allowing each fuse position to be named for clear system identification.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e500A (M10) - LYN034160310\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1000A (M10) - LYN034170310\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e9-60 VDC (max input: 75 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported System Voltages\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12V \/ 24V \/ 48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContactor Continuous Current Rating\u003c\/td\u003e\n\u003ctd\u003e500A\u003c\/td\u003e\n\u003ctd\u003e1000A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContactor Peak Current Rating\u003c\/td\u003e\n\u003ctd\u003e600A (5 min)\u003c\/td\u003e\n\u003ctd\u003e1200A (5 min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (ON mode @ 12V)\u003c\/td\u003e\n\u003ctd\u003eApprox. 2.6W (217mA)\u003c\/td\u003e\n\u003ctd\u003eApprox. 4.2W (350mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAUX Output Current Rating\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.1A continuous (resettable fuse protected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eATC \/ ATD Port Current Rating\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e0.5A at 60 VDC (resettable fuse protected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Relay (SPDT)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2A at 60 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Batteries per System\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e50 batteries (up to 384 kWh at 48V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBluetooth | VE.Can (RJ45) | NMEA 2000 (via cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e−40°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"1\"\u003e1.9 kg\u003c\/td\u003e\n\u003ctd colspan=\"1\"\u003e2.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd\u003e190 x 180 x 80 mm\u003c\/td\u003e\n\u003ctd\u003e230 × 180 × 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Lynx-Smart-BMS-NG-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lynx_Smart_BMS_NG\/174679-Lynx_Smart_BMS_NG-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"BMS 500 NG(M10)","offer_id":48421971296505,"sku":"BMV17561","price":884.0,"currency_code":"USD","in_stock":true},{"title":"BMS 1000 NG(M10)","offer_id":48421971329273,"sku":"BMV17591","price":1178.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BMV17561-1.webp?v=1779254342"},{"product_id":"victron-phoenix-inverter-controll-panel","title":"Victron Phoenix Inverter Control Panel","description":"\u003cp\u003eThe Victron Phoenix Inverter Control (REC030001210) is a dedicated remote monitoring and control panel designed for large Phoenix Inverters equipped with a VE.Bus RJ45 UTP remote monitoring and control socket. Connecting to the inverter via a standard UTP cable with RJ45 connectors, it provides LED indication of inverter status and operational control — including on, off, and AES (Automatic Economy Switching) mode selection — from a remote panel location without requiring physical access to the inverter unit itself.\u003c\/p\u003e\n\u003cp\u003eThe panel is also compatible with the MultiPlus Inverter\/Charger when an automatic transfer switch function is required but no charger functionality is needed — providing basic inverter on\/off and AES control across the MultiPlus range in this specific use case. A standard UTP (Ethernet) patch cable of any required length connects the panel to the inverter's RJ45 remote socket — the cable is not included and must be sourced separately.\u003c\/p\u003e\n\u003cp\u003eStatus LEDs on the panel provide an at-a-glance overview of inverter operating state — including mains present, inverter on, low battery, overload, and fault conditions — making it easy to confirm system status from a convenient remote location such as a helm station, electrical panel, or living area. LED brightness is automatically reduced at night by a built-in ambient light sensor, preventing the panel from becoming an unwanted light source in darkened sleeping quarters or accommodation spaces.\u003c\/p\u003e\n\u003cp\u003eCertified to IEC 60335-1, the Phoenix Inverter Control is suitable for use in European and international marine, RV, and off-grid installations. It is compatible with the following Phoenix Inverter models only: 12\/1200, 12\/1600, 12\/2000, 12\/3000, 12\/5000, 24\/1200, 24\/1600, 24\/2000, 24\/3000, 24\/5000, 48\/3000, and 48\/5000. For Phoenix Inverters with a VE.Direct port rather than a VE.Bus RJ45 port, the separate Phoenix Inverter Control VE.Direct panel is required instead.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eRemote On\/Off and AES Mode Control\u003c\/h4\u003e\n\u003cp\u003eProvides remote on\/off switching and AES (Automatic Economy Switching) mode selection for compatible Phoenix Inverters — allowing operators to control inverter operation from a convenient remote location without accessing the inverter unit, and enabling AES mode to reduce no-load power consumption during periods of low demand.\u003c\/p\u003e\n\u003ch4\u003eLED Status Indication\u003c\/h4\u003e\n\u003cp\u003eMultiple LEDs display the current inverter operating state — including mains\/grid present, inverter active, low battery warning, overload, and fault conditions — giving an immediate at-a-glance overview of inverter status from wherever the panel is mounted.\u003c\/p\u003e\n\u003ch4\u003eAutomatic LED Brightness Reduction at Night\u003c\/h4\u003e\n\u003cp\u003eA built-in ambient light sensor automatically reduces LED brightness in low-light or dark conditions — preventing the panel from becoming an unwanted light source in sleeping quarters, cabins, or darkened control areas during overnight inverter operation.\u003c\/p\u003e\n\u003ch4\u003eUTP Cable Connection — Any Length\u003c\/h4\u003e\n\u003cp\u003eConnects to the Phoenix Inverter's VE.Bus RJ45 remote monitoring and control socket via a standard UTP (Ethernet) patch cable — allowing the panel to be located at any distance from the inverter using a standard straight-through Ethernet cable of the required length. Cable not included.\u003c\/p\u003e\n\u003ch4\u003eCompatible with MultiPlus for Transfer Switch Control\u003c\/h4\u003e\n\u003cp\u003eCan be used on a MultiPlus Inverter\/Charger when an automatic transfer switch function is required without the charger functionality — providing basic inverter on\/off and AES control across compatible MultiPlus models in this specific configuration.\u003c\/p\u003e\n\u003ch4\u003eIEC 60335-1 Certified\u003c\/h4\u003e\n\u003cp\u003eCertified to IEC 60335-1 for household and similar electrical appliances safety — confirming the panel's suitability for installation in marine, RV, and off-grid installations across European and international markets.\u003c\/p\u003e\n\u003ch4\u003eCompatible with VE.Bus Phoenix Inverters 1200VA and Above Only\u003c\/h4\u003e\n\u003cp\u003eDesigned exclusively for large Phoenix Inverters (1200VA and above) equipped with a VE.Bus RJ45 UTP remote socket — not compatible with smaller Phoenix Inverter models or with Phoenix Inverters featuring a VE.Direct port, which require the separate Phoenix Inverter Control VE.Direct panel.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eREC030001210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Inverters\u003c\/td\u003e\n\u003ctd\u003ePhoenix Inverter 12\/1200, 12\/1600, 12\/2000, 12\/3000, 12\/5000 | 24\/1200, 24\/1600, 24\/2000, 24\/3000, 24\/5000 | 48\/3000, 48\/5000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlso Compatible With\u003c\/td\u003e\n\u003ctd\u003eMultiPlus Inverter\/Charger (transfer switch function, no charger control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eUTP cable with RJ45 connector (cable not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Functions\u003c\/td\u003e\n\u003ctd\u003eOn \/ Off \/ AES (Automatic Economy Switching) mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Status Indicators\u003c\/td\u003e\n\u003ctd\u003eMains present \/ Inverter on \/ Low battery \/ Overload \/ Fault\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic Night Dimming\u003c\/td\u003e\n\u003ctd\u003eYes - ambient light sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eIEC 60335-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06 kg (approx.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eProduct Dimensions\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Dimensions-of-metal-panel-for-REC030001210-Inverter-Control_v2.0.pdf\" target=\"_blank\"\u003eProduct Dimensions\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125546565881,"sku":"IVV50220","price":96.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50220-1.webp?v=1779761070"},{"product_id":"victron-auto-transformer-100a","title":"Victron Auto Transformer 100A","description":"\u003cp\u003eThe Victron Auto Transformer 120\/240V-100A is a heavy-duty toroidal autotransformer designed for step-up, step-down, and split-phase output balancing applications in off-grid, marine, and RV power systems. Rated at 100A feed-through current, it enables the safe and efficient use of 120V and 240V loads from a single power source, and resolves the current imbalance that naturally occurs in split-phase systems where 120V loads are unevenly distributed across the two legs.\u003c\/p\u003e\n\u003cp\u003eThe split-phase balancing function is the most powerful capability of the Auto Transformer: when a 240V split-phase supply or stacked inverter output is used to power 120V loads, any current imbalance between the two legs — often 20A or more in real-world installations — is absorbed by the autotransformer windings rather than wasted as lost capacity. This allows the full 100A rating of the supply to be utilised regardless of how unevenly the 120V loads are distributed, dramatically improving system efficiency and preventing individual leg overloads.\u003c\/p\u003e\n\u003cp\u003eA built-in ground relay enables neutral-to-ground bonding within the autotransformer enclosure — essential when operating with a Victron MultiPlus or Quattro inverter\/charger in split-phase or stacked inverter configurations where the inverter's internal ground relay is not used. Temperature protection is also built in: a cooling fan activates when the transformer is warm, and a manual-reset MCB (miniature circuit breaker) disconnects the unit in the event of overtemperature or overcurrent.\u003c\/p\u003e\n\u003cp\u003eConstructed with a toroidal core in a robust aluminium enclosure and rated IP21, the Auto Transformer 100A is suitable for fixed indoor and compartment installations in marine, RV, and off-grid applications. It is compatible with both 50Hz and 60Hz systems and carries safety certification to EN 60076.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eStep-Up and Step-Down Voltage Conversion\u003c\/h4\u003e\n\u003cp\u003eConverts 120VAC to 240VAC (step-up) or 240VAC to 120VAC (step-down) to suit different load and supply voltage requirements. Input current is limited by the built-in 100A two-pole circuit breaker regardless of direction of conversion.\u003c\/p\u003e\n\u003ch4\u003eSplit-Phase Output Balancing\u003c\/h4\u003e\n\u003cp\u003eAbsorbs current imbalance between the two 120V legs of a split-phase 120\/240V supply, allowing the full 100A rated capacity of the supply to be used even when 120V loads are heavily unbalanced — preventing individual leg overloads and maximising available power from generators or stacked inverter systems.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Ground Relay for Multi and Quattro Integration\u003c\/h4\u003e\n\u003cp\u003eAn integrated ground relay provides neutral-to-ground bonding within the autotransformer enclosure, making it suitable for use with Victron MultiPlus or Quattro inverter\/chargers in split-phase and stacked inverter configurations where GFCI protection requires a grounded neutral.\u003c\/p\u003e\n\u003ch4\u003eTemperature and Overcurrent Protection\u003c\/h4\u003e\n\u003cp\u003eAn active cooling fan operates when the transformer temperature rises, and a manual-reset miniature circuit breaker (MCB) disconnects the unit automatically in the event of sustained overtemperature or overcurrent — protecting the transformer and connected equipment from damage.\u003c\/p\u003e\n\u003ch4\u003eToroidal Core Construction\u003c\/h4\u003e\n\u003cp\u003eThe toroidal transformer core provides high efficiency power conversion with minimal losses and low electromagnetic interference compared to conventional E-I laminated core designs — making it well suited to sensitive electronics environments in marine and RV installations.\u003c\/p\u003e\n\u003ch4\u003eAluminium Enclosure with IP21 Protection\u003c\/h4\u003e\n\u003cp\u003eThe robust aluminium enclosure provides structural strength and corrosion resistance for long-term reliability in marine and vehicle environments. IP21 protection guards against vertical water drip ingress, suitable for indoor and compartment mounting applications.\u003c\/p\u003e\n\u003ch4\u003e50\/60Hz Compatible\u003c\/h4\u003e\n\u003cp\u003eCompatible with both 50Hz and 60Hz electrical systems, making the Auto Transformer 100A suitable for international use across North American and European frequency standards.\u003c\/p\u003e\n\u003ch4\u003eWall or Panel Mountable\u003c\/h4\u003e\n\u003cp\u003eDesigned for fixed installation with conduit entry options for both 1\/2-inch and 3\/4-inch NPT conduit fittings, providing a clean and compliant wiring installation in professional and marine electrical panels.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput \/ Output Voltage\u003c\/td\u003e\n\u003ctd\u003e120 \/ 240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum 240V Feed-Through Current\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Circuit Breaker\u003c\/td\u003e\n\u003ctd\u003e100A, two-pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeutral Current (30 min)\u003c\/td\u003e\n\u003ctd\u003e32A (3800 VA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeutral Current (Continuous)\u003c\/td\u003e\n\u003ctd\u003e28A @ 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e50 \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransformer Type\u003c\/td\u003e\n\u003ctd\u003eToroidal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e425 × 214 × 110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Autotransformer-32A-and-100A-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Autotransformer-32A-and-100A-EN-(P).pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125546598649,"sku":"IVV50210","price":509.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50210-1.webp?v=1779001290"},{"product_id":"victron-lynx-battery-monitor-shunt-ve-can-module-m10","title":"Victron Lynx Battery Monitor\/Shunt VE Can Module (M10)","description":"\u003cp\u003eThe Victron Lynx Shunt VE.Can (M10) is a modular busbar unit featuring integrated battery monitoring and a main system fuse holder — forming the heart of the Lynx Distribution System. Combining a positive busbar with a fuse location and a negative busbar with a precision shunt, it provides high-accuracy battery state of charge monitoring with VE.Can communication to any connected GX device, enabling battery data to be displayed locally and logged remotely via the Victron VRM portal.\u003c\/p\u003e\n\u003cp\u003eThe M10 variant uses M10 busbar interconnection bolts — compatible with all M10 Lynx modules including the Lynx Smart BMS M10, Lynx Distributor M10, Lynx Power In M10, Lynx Class-T Power In, and Lynx Smart BMS NG M10. Unlike the M8 model which is designed exclusively for CNN fuses, the M10 model accepts CNN, ANL, and Mega format fuses — and uniquely includes a dummy busbar that can replace the fuse holder entirely, allowing the main system fuse to be relocated to a different position in the installation when required. All fuses are sold separately.\u003c\/p\u003e\n\u003cp\u003eTwo RJ45 VE.Can terminators are included in the box for use when connecting the Lynx Shunt directly to a GX device — as terminators are required at both ends of any VE.Can network. A temperature sensor is also included, connecting to a screw terminal on the unit, and enables battery temperature monitoring via the GX device alongside state of charge, voltage, current, and power data. A potential-free alarm relay contact is available for external alarm signalling.\u003c\/p\u003e\n\u003cp\u003eA power LED provides at-a-glance operational status. The RJ10 power supply connection allows the Lynx Shunt VE.Can to power connected Lynx Distributor modules and receive fuse status data from up to four Lynx Distributors simultaneously — raising blown fuse alarms through the GX device and VRM portal.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/OWJvDYDkl5E\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eIntegrated Battery Monitor — State of Charge, Voltage, Current, and Power\u003c\/h4\u003e\n\u003cp\u003eThe precision shunt on the negative busbar measures all current flowing in and out of the battery bank — enabling the built-in battery monitor to calculate and report state of charge, remaining capacity, time to go, voltage, current, power, and historical data in real time via a connected GX device and the VRM remote monitoring portal.\u003c\/p\u003e\n\u003ch4\u003eVE.Can Communication — GX Device and NMEA 2000 Integration\u003c\/h4\u003e\n\u003cp\u003eTwo RJ45 VE.Can ports connect the Lynx Shunt VE.Can to a GX device (Cerbo GX, Ekrano GX, Venus GX, or Color Control GX) for full battery monitor data display and logging, and to NMEA 2000 marine networks via a VE.Can to NMEA 2000 Micro-C cable for glass bridge MFD integration on vessels.\u003c\/p\u003e\n\u003ch4\u003eM10 Busbar — Compatible with CNN, ANL, and Mega Fuses\u003c\/h4\u003e\n\u003cp\u003eThe M10 model accepts CNN, ANL, and Mega format main system fuses — providing flexibility for larger installations requiring higher interrupt-rated fusing compared to the CNN-only M8 model. A dummy busbar is included to replace the fuse holder when the main fuse is to be located elsewhere in the installation.\u003c\/p\u003e\n\u003ch4\u003eDummy Busbar for External Fuse Placement\u003c\/h4\u003e\n\u003cp\u003eAn additional dummy busbar is included with the M10 model — replacing the fuse holder inside the shunt enclosure and allowing the main system fuse to be placed externally in a different Lynx module (such as a Lynx Class-T Power In) or a separate fuse holder, particularly useful in large systems requiring Class-T fuses rated above the CNN\/ANL\/Mega range.\u003c\/p\u003e\n\u003ch4\u003eTemperature Sensor Included — Battery Temperature Monitoring\u003c\/h4\u003e\n\u003cp\u003eA battery temperature sensor is included and connects via a dedicated screw terminal on the Lynx Shunt VE.Can — enabling battery temperature to be monitored via the GX device alongside all battery monitor data, and used for temperature-compensated charging when combined with compatible Victron inverter\/chargers.\u003c\/p\u003e\n\u003ch4\u003ePotential-Free Alarm Relay Contact\u003c\/h4\u003e\n\u003cp\u003eA potential-free alarm relay contact rated 3A at 30 VDC \/ 250 VAC can be configured via the GX device to trigger an external alarm signal — audible buzzer, LED, or relay — in the event of battery monitor alarms such as low state of charge, high or low voltage, or blown fuse detection from connected Lynx Distributors.\u003c\/p\u003e\n\u003ch4\u003ePowers and Monitors Up to Four Lynx Distributors via RJ10\u003c\/h4\u003e\n\u003cp\u003eAn RJ10 power supply port connects to up to four Lynx Distributor M10 modules — powering the Distributor electronics and receiving digital fuse status data from all 16 fuse positions, raising alarms in VictronConnect and on GX devices when any fuse blows.\u003c\/p\u003e\n\u003ch4\u003eModular Lynx Distribution System Integration\u003c\/h4\u003e\n\u003cp\u003eConnects directly to all M10 Lynx modules — Lynx Power In M10, Lynx Class-T Power In, Lynx Distributor M10, Lynx Smart BMS M10, and Lynx Smart BMS NG M10 — forming a continuous positive and negative busbar assembly that can be configured and expanded to suit any installation from a simple lead-acid battery system to a large multi-battery lithium installation.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLYN040102110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9-70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported System Voltages\u003c\/td\u003e\n\u003ctd\u003e12V \/ 24V \/ 48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd\u003e1000A continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e60 mA @ 12V | 33 mA @ 24V | 20 mA @ 48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBusbar Connection\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Fuse Types\u003c\/td\u003e\n\u003ctd\u003eCNN \/ ANL \/ Mega (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDummy Busbar (external fuse option)\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Can Communication\u003c\/td\u003e\n\u003ctd\u003e2 × RJ45 (two terminators included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Relay\u003c\/td\u003e\n\u003ctd\u003ePotential-free - 3A @ 30 VDC \/ 250 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Sensor\u003c\/td\u003e\n\u003ctd\u003eIncluded (screw terminal connection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e−40°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e190 × 180 × 80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Lynx-Shunt-VE.Can-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lynx_Shunt_VE.Can_-_M10\/182953-Lynx_Shunt_VE_Can__M10__Manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125546828025,"sku":"BMV17456","price":391.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BMV17456-1.webp?v=1779770881"},{"product_id":"victron-7000w-isolation-transformer","title":"Victron 7000W Isolation Transformer","description":"\u003cp\u003eThe Victron Isolation Transformer 7000W 230V is a professional-grade marine isolation transformer designed to provide complete electrical isolation between shore power and a vessel's onboard AC electrical system. Essential for safety and galvanic corrosion prevention in any vessel connected to shore power, it eliminates the need for separate galvanic isolators and polarity alarms while providing a clean, isolated AC supply for the entire vessel.\u003c\/p\u003e\n\u003cp\u003eBy feeding shore power to the transformer's primary winding and connecting the vessel to the secondary, the Isolation Transformer completely breaks electrical continuity between the shore ground and the vessel. All metal parts on the vessel are connected to the neutral output on the secondary side, ensuring that GFCIs and circuit breakers function correctly in the event of a fault — providing the same level of electrical safety as a conventional onshore installation, without the galvanic corrosion risk of a direct shore ground connection.\u003c\/p\u003e\n\u003cp\u003eThe transformer operates with a 1:1.05 voltage conversion ratio, stepping a 230V shore supply up to 240V on the vessel side. This 5% boost compensates for the shore power voltage drops that commonly occur in marinas, ensuring the onboard AC system receives adequate voltage regardless of marina supply quality. The unit is compatible with both 50Hz and 60Hz systems, though it cannot convert between frequencies.\u003c\/p\u003e\n\u003cp\u003eA built-in soft start circuit prevents the shore power circuit breaker from tripping due to transformer inrush current when the unit is switched on — a critical feature for marina electrical systems with limited supply capacity. A temperature-controlled fan provides active cooling, and automatic overtemperature shutdown protects the transformer under sustained overload conditions.\u003c\/p\u003e\n\u003cp\u003eHoused in a robust blue aluminium enclosure (RAL5012) rated IP21, the Victron Isolation Transformer 7000W is designed for fixed installation inside a vessel using the included hanging bracket and mounting screws. It is certified to EN 60076 and suitable for use in both 50Hz and 60Hz marina environments worldwide.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eComplete Galvanic Isolation from Shore Power\u003c\/h4\u003e\n\u003cp\u003eThe isolation transformer completely breaks electrical continuity between the shore ground and the vessel, eliminating galvanic corrosion caused by stray currents between the shore earth connection and immersed metal parts — protecting propellers, shafts, anodes, and hull fittings from accelerated electrolytic attack.\u003c\/p\u003e\n\u003ch4\u003eFull Electrical Safety — Replaces Galvanic Isolators and Polarity Alarms\u003c\/h4\u003e\n\u003cp\u003eBy connecting all vessel metal parts to the isolated secondary neutral, GFCIs and circuit breakers function correctly in the event of any fault — providing full electrical safety without the limitations of direct shore grounding, while eliminating the need for separate galvanic isolators or polarity alarm devices.\u003c\/p\u003e\n\u003ch4\u003e1:1.05 Voltage Ratio — 5% Output Voltage Boost\u003c\/h4\u003e\n\u003cp\u003eThe toroidal transformer operates with a 1:1.05 turns ratio, converting a 230V shore input to 240V on the vessel output. This built-in 5% boost compensates for the voltage drops commonly encountered in marina shore power supplies, ensuring adequate onboard AC voltage under load.\u003c\/p\u003e\n\u003ch4\u003eSoft Start — Prevents Shore Circuit Breaker Tripping\u003c\/h4\u003e\n\u003cp\u003eAn integrated inrush current limiter (soft start circuit) reduces the high inrush current at switch-on that would otherwise trip a marina shore power circuit breaker. This is a standard feature on all Victron isolation transformers and is particularly important for marinas with tight circuit breaker tolerances.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Controlled Fan Cooling and Overtemperature Protection\u003c\/h4\u003e\n\u003cp\u003eAn internal fan with temperature-controlled variable speed provides active cooling as load increases. Automatic overtemperature shutdown protects the transformer from damage under sustained overload or high ambient temperature conditions, with manual reset required after a thermal shutdown event.\u003c\/p\u003e\n\u003ch4\u003eToroidal Core Construction — Low Noise and High Efficiency\u003c\/h4\u003e\n\u003cp\u003eThe toroidal wound transformer core provides inherently low electromagnetic noise and high power conversion efficiency compared to conventional laminated core designs, making it well suited to sensitive onboard electronics environments where interference must be minimised.\u003c\/p\u003e\n\u003ch4\u003eOut-of-Water Safety Link\u003c\/h4\u003e\n\u003cp\u003eIncluded jumper wires allow the shore earth (PE) to be connected directly to the vessel earth (PE) within the transformer enclosure when the vessel is on land for winter storage or maintenance — restoring the shore ground connection for safe use while hauled out, in accordance with electrical safety regulations.\u003c\/p\u003e\n\u003ch4\u003e32A Continuous Output Current Rating\u003c\/h4\u003e\n\u003cp\u003eRated at 32A continuous output current at 240V, the 7000W Isolation Transformer supports the full electrical demand of a large vessel, including high-consumption appliances such as air conditioning, electric cooking, and battery charging systems operating simultaneously.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Voltage\u003c\/td\u003e\n\u003ctd\u003e230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Output Voltage\u003c\/td\u003e\n\u003ctd\u003e240V (1:1.05 ratio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current Rating\u003c\/td\u003e\n\u003ctd\u003e32A continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e50 \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransformer Type\u003c\/td\u003e\n\u003ctd\u003eToroidal, 1:1.05 ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoft Start\u003c\/td\u003e\n\u003ctd\u003eYes-inrush current limiter included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e30.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e362 × 258 × 218 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Isolation-Transformersa-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Isolation-Transformer-7000W-230V-EN-(P)-old.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47125594636537,"sku":"ITV10700","price":816.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-ITV10700-1.webp?v=1779008272"},{"product_id":"victron-buck-boost-dc-dc-converter","title":"Victron Buck-Boost DC-DC Converter","description":"\u003cp\u003eThe Victron Buck-Boost DC-DC Converter is a fully programmable, non-isolated DC-DC converter designed to charge a 12V or 24V service (auxiliary) battery in vehicles equipped with a smart alternator — where the alternator output is controlled by the vehicle's onboard electronics and may not deliver sufficient or consistent charging voltage to the service battery. Available in three output current ratings — 25A, 50A, and 100A — all models feature automatic buck\/boost control, engine-running detection, adjustable current limiting, M8 connections, USB configuration, and an onboard battery monitor, making them the professional solution for controlled auxiliary battery charging in camper vans, trucks, buses, and professional vehicles.\u003c\/p\u003e\n\u003cp\u003eModern Euro 5 and Euro 6 vehicles use intelligent alternator control systems that reduce alternator output voltage at cruise speed to recover energy during deceleration — a fuel-saving measure that also means the alternator often produces insufficient voltage to properly charge a service battery connected in parallel. The Buck-Boost converter solves this by accepting any input voltage between 10V and 30V and producing an independently regulated output voltage also between 10V and 30V — using automatic buck or boost control to maintain the correct charge voltage at the service battery regardless of whether the alternator output is above or below the target charge voltage.\u003c\/p\u003e\n\u003cp\u003eThe converter activates automatically when the engine is running — detected via an engine-running detection protocol on the ignition or via a dedicated input wire — and deactivates when the engine stops, preventing battery drain when parked. Two output pins (maximum 1A each, output voltage equal to input voltage) can be used to activate or deactivate external loads or relays based on engine-running status. An optional battery temperature sensor input enables temperature-compensated charging. All settings — including output voltage, current limit, and charge algorithm — are fully configurable via USB connection to a PC using dedicated Victron software.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eAutomatic Buck\/Boost Control — Works with Any Smart Alternator\u003c\/h4\u003e\n\u003cp\u003eAccepts any input voltage between 10V and 30V and automatically applies either buck (step-down) or boost (step-up) conversion to maintain a stable, correctly regulated charge voltage at the service battery — regardless of whether the alternator output is above or below the target charge voltage at any given moment.\u003c\/p\u003e\n\u003ch4\u003eFully Programmable via USB\u003c\/h4\u003e\n\u003cp\u003eAll converter parameters — including output voltage, charge current limit, charge algorithm, low voltage cut-off, and engine-running detection thresholds — are fully configurable via USB connection to a PC using dedicated Victron configuration software, enabling precise customisation for any vehicle and battery type.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Engine-Running Detection and Activation\u003c\/h4\u003e\n\u003cp\u003eThe converter activates automatically when it detects the engine is running — via an alternator input signal or ignition wire — and deactivates when the engine stops. This prevents the service battery from discharging the starter battery when the vehicle is parked, without requiring any manual switching.\u003c\/p\u003e\n\u003ch4\u003eAdjustable Current Limiter — Alternator Protection\u003c\/h4\u003e\n\u003cp\u003eThe maximum output current is adjustable and enforced precisely — preventing the combined load of the alternator charging both batteries from exceeding the alternator's rated capacity. This is particularly important in lithium battery installations where a depleted lithium service battery could otherwise overload a standard alternator.\u003c\/p\u003e\n\u003ch4\u003eTwo Auxiliary Output Pins — Load Activation and Deactivation\u003c\/h4\u003e\n\u003cp\u003eTwo output pins (1A each, output voltage equal to input voltage) can be used to activate or deactivate external relays, DC loads, or accessories based on engine-running status — enabling automatic switching of refrigerators, auxiliary heaters, or other vehicle equipment with the engine state.\u003c\/p\u003e\n\u003ch4\u003eBattery Monitor — State of Charge and Current Measurement\u003c\/h4\u003e\n\u003cp\u003eA built-in battery monitor tracks output current and battery state of charge in real time — providing visibility of service battery charging progress and status via the USB configuration interface and optional LED indicators on the converter front panel.\u003c\/p\u003e\n\u003ch4\u003eOptional Temperature Sensor Input\u003c\/h4\u003e\n\u003cp\u003eAn optional battery temperature sensor can be connected to the temperature monitoring input — enabling temperature-compensated output voltage adjustment for accurate charging across a wide range of ambient temperatures, particularly important for lead-acid batteries in cold climates.\u003c\/p\u003e\n\u003ch4\u003eAvailable in 25A, 50A, and 100A\u003c\/h4\u003e\n\u003cp\u003eAvailable in three output current ratings to suit different auxiliary battery bank sizes and vehicle electrical loads — 25A (300W at 12V), 50A (600W at 12V), and 100A (1200W at 12V) — all with the same input\/output voltage range, feature set, and configuration interface.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 99.9677%; height: 274.273px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 39.1818px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 39.1818px;\"\u003e\u003cstrong\u003e25A (ORI303025000)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 39.1818px;\"\u003e\u003cstrong\u003e50A (ORI303050000)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.974%; height: 39.1818px;\"\u003e\u003cstrong\u003e100A (ORI303100000)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 19.5909px;\"\u003e10-30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eOutput Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 19.5909px;\"\u003e10-30 VDC (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eMax Output Current (12V)\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e25A\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e50A\u003c\/td\u003e\n\u003ctd style=\"width: 22.974%; height: 19.5909px;\"\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eMax Output Current (24V)\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e15A\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e25A\u003c\/td\u003e\n\u003ctd style=\"width: 22.974%; height: 19.5909px;\"\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eUndervoltage Threshold\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 19.5909px;\"\u003e10V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eMaximum Input Voltage\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 19.5909px;\"\u003e30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eOn\/Off Input Threshold\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 19.5909px;\"\u003e\u0026gt; 2V (on) \/ \u0026lt; 2V (off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 39.1818px;\"\u003ePower Consumption (off \/ LEDs off)\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 39.1818px;\"\u003e7 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 67.2395%; height: 19.5909px;\"\u003e−25°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e0.6 kg\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e1.4 kg\u003c\/td\u003e\n\u003ctd style=\"width: 22.974%; height: 19.5909px;\"\u003e4.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 28.7811%; height: 19.5909px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e165 × 120 × 30 mm\u003c\/td\u003e\n\u003ctd style=\"width: 22.1327%; height: 19.5909px;\"\u003e213 × 120 × 30 mm\u003c\/td\u003e\n\u003ctd style=\"width: 22.974%; height: 19.5909px;\"\u003e288 × 162 × 95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Buck-Boost-DC-DC-converter-25A-50A-100A-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Buck-Boost-DC-DC-converter-EN-NL-FR-DE-SE-RU.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"25A","offer_id":48445317251321,"sku":"VCV70238","price":685.1,"currency_code":"USD","in_stock":true},{"title":"50A","offer_id":48445317218553,"sku":"VCV70240","price":851.7,"currency_code":"USD","in_stock":true},{"title":"100A","offer_id":48445317185785,"sku":"VCVBBOOST","price":1490.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-VCV70238-1.webp?v=1779773671"},{"product_id":"victron-bmv-712-smart-battery-monitor-with-bluetooth","title":"Victron BMV-712 Smart Battery Monitor w\/ Bluetooth","description":"\u003cp\u003eThe Victron BMV-712 Smart is a high-precision battery monitor with built-in Bluetooth, designed to provide comprehensive real-time and historical monitoring of any 12V, 24V, or 48V battery bank from 1Ah to 9999Ah. The essential function of the BMV-712 Smart is to calculate amp-hours consumed and state of charge — tracking precisely how much energy enters and leaves the battery so users always know how much capacity remains and how long the battery will last at the current rate of discharge.\u003c\/p\u003e\n\u003cp\u003eBuilt-in Bluetooth Smart enables direct wireless pairing with the VictronConnect app on iOS and Android smartphones and tablets — without needing a GX device or computer. From the app, users can monitor all live data on a single screen, customise settings, review 46-day historical trend data for voltage, current, state of charge, and auxiliary input, and update firmware wirelessly when new features become available.\u003c\/p\u003e\n\u003cp\u003eIn addition to battery voltage, current, power, amp-hours consumed, and state of charge, the BMV-712 Smart features a versatile auxiliary input that can be configured for one of three functions: monitoring the voltage of a second or starter battery, midpoint voltage monitoring for series-connected battery strings (with early warning of a failing battery or cell), or connection of an optional temperature sensor for battery temperature measurement and compensation. All three auxiliary functions can trigger independent programmable alarms and relay actions.\u003c\/p\u003e\n\u003cp\u003eThe included 500A\/50mV quick-connect shunt allows all electrical connections to be made at the shunt in the battery compartment, with the display head unit connected via the included 10-metre RJ12 cable — keeping high-current wiring away from the display. A VE.Direct port enables direct connection to a Victron GX device for integration into a full system monitoring setup with VRM remote access. A bi-stable relay prevents increased current draw during alarm conditions.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/2vA-EjSSBVA?si=6L1TvINlGc4uGuOx\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eBluetooth Smart with VictronConnect App\u003c\/h4\u003e\n\u003cp\u003eBuilt-in Bluetooth Smart pairs wirelessly with the VictronConnect app on iOS and Android devices, providing real-time monitoring of all battery parameters, full settings configuration, 46-day historical trend data, and wireless firmware updates — all from a smartphone without any additional hardware.\u003c\/p\u003e\n\u003ch4\u003eComprehensive Battery Monitoring\u003c\/h4\u003e\n\u003cp\u003eMonitors and displays battery voltage, current, power, amp-hours consumed, state of charge, and time remaining at the current rate of discharge — providing a complete picture of battery health and capacity status at all times for any battery bank from 1Ah to 9999Ah.\u003c\/p\u003e\n\u003ch4\u003eVersatile Auxiliary Input — Starter Battery \/ Midpoint \/ Temperature\u003c\/h4\u003e\n\u003cp\u003eThe auxiliary input can be configured for three different functions: second or starter battery voltage monitoring, midpoint voltage monitoring for series-connected battery banks (providing early warning of a failing battery or cell), or connection of an optional temperature sensor (ASS000100000) for battery temperature measurement down to −20°C.\u003c\/p\u003e\n\u003ch4\u003eMidpoint Voltage Monitoring for Battery Bank Protection\u003c\/h4\u003e\n\u003cp\u003eWhen batteries are connected in series, a single failing battery or cell causes an imbalance in the midpoint voltage. The BMV-712 Smart measures this midpoint deviation and generates a programmable alarm before serious damage occurs — protecting large, expensive battery banks from undetected cell or battery failure.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Alarms and Bi-Stable Relay\u003c\/h4\u003e\n\u003cp\u003eFully programmable alarm thresholds for voltage, state of charge, temperature, and auxiliary input allow the BMV-712 Smart to trigger visual and audible alerts at user-defined levels. The bi-stable relay (60V\/1A, normally open) can be configured to disconnect non-critical loads, start a generator, or trigger external alarms — and draws no additional current in the alarm state.\u003c\/p\u003e\n\u003ch4\u003e500A Quick-Connect Shunt — Included\u003c\/h4\u003e\n\u003cp\u003eThe included 500A\/50mV shunt features a quick-connect PCB that accepts all electrical connections in the battery compartment, with the display head unit connected via the 10-metre RJ12 cable. The shunt is also compatible with optional 1000A, 2000A, and 6000A shunts for higher-current installations, using the same quick-connect PCB.\u003c\/p\u003e\n\u003ch4\u003eVE.Direct Port for GX Device Integration\u003c\/h4\u003e\n\u003cp\u003eThe built-in VE.Direct port connects directly to a Victron GX device — such as the Cerbo GX or Ekrano GX — enabling all BMV-712 Smart data to be displayed on the GX device and logged remotely via the Victron VRM portal. Up to four BMV units can be connected directly to a GX device, with additional units supported via a USB hub.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 99.9677%; height: 235.091px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 19.5909px;\"\u003eSupply Voltage Range\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 19.5909px;\"\u003e6.5-70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 19.5909px;\"\u003eCurrent Draw (backlight off)\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 19.5909px;\"\u003e\u0026lt; 1 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 19.5909px;\"\u003eBattery Capacity Range\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 19.5909px;\"\u003e1-9999 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 39.1818px;\"\u003eCurrent Measurement Accuracy\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 39.1818px;\"\u003e± 0.4% (resolution: ± 0.01A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 39.1818px;\"\u003eVoltage Measurement Accuracy\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 39.1818px;\"\u003e± 0.3% (resolution: ± 0.01V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 19.5909px;\"\u003eBistable Relay\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 19.5909px;\"\u003e60V \/ 1A, normally open (function invertible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 19.5909px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 19.5909px;\"\u003e−40°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 19.5909px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 19.5909px;\"\u003eIP55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 33.4075%; height: 39.1818px;\"\u003eDimensions (head unit)\u003c\/td\u003e\n\u003ctd style=\"width: 64.3603%; height: 39.1818px;\"\u003eFront: 63mm diameter | Body: 52mm diameter × 31mm depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMV-712-Smart-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/BMV-712_Smart\/9172-Manual_BMV_and_SmartShunt-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127236673785,"sku":"BMV07004","price":158.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BMV07004-1.webp?v=1779199897"},{"product_id":"victron-cyrix-li-load-230a-battery-combiner","title":"Victron Cyrix-Li-Load 230A Battery Combiner","description":"\u003cp\u003eThe Victron Cyrix-Li-Load 230A is a microprocessor-controlled, VE.Bus BMS-managed battery combiner designed to automatically disconnect DC loads from a Victron LiFePO₄ battery bank in the event of imminent cell undervoltage — acting as a second line of protection for loads and equipment that cannot be directly controlled by the VE.Bus BMS Load Disconnect output. Available in two voltage versions — 12\/24V (CYR010230450) and 24\/48V (CYR020230450) — both rated at 230A continuous, it provides reliable high-current load switching without any voltage drop, making it suitable for large inverters, DC loads, and high-current equipment in demanding lithium battery installations.\u003c\/p\u003e\n\u003cp\u003eThe Cyrix-Li-Load works in combination with the VE.Bus BMS or SmallBMS. The Load Disconnect output of the BMS — which is normally high and goes free floating in the event of imminent cell undervoltage — is connected to the 1-metre control cable included with the combiner. When the BMS output is high (normal operation), the Cyrix-Li-Load remains engaged, connecting the load to the battery. When the BMS Load Disconnect output goes free floating — signalling that cell voltage is critically low — the Cyrix-Li-Load disengages immediately, disconnecting the load and preventing further battery discharge that could cause permanent cell damage.\u003c\/p\u003e\n\u003cp\u003eAfter the load is disconnected, the battery voltage may recover due to the removal of the discharge current. When the BMS output returns to high (indicating recovery), the Cyrix-Li-Load attempts to reengage after 30 seconds. After three unsuccessful reengagement attempts, the unit remains disengaged until the battery voltage has been above 13V (26V or 52V for higher voltage systems) for at least 30 seconds — indicating that the battery is actually being recharged rather than simply recovering momentarily under no-load conditions.\u003c\/p\u003e\n\u003cp\u003eThe 230A model is significantly larger and heavier than the 120A Cyrix-Li-Load, providing double the continuous current capacity and a breaking capacity of 80A at 48V — making it suitable for large parallel battery banks and high-current DC systems where the 120A model would be undersized. A LED status indicator shows engaged, disengaged, connecting, disconnecting, and alarm states at a glance. The 1-metre control cable is included in the box.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eVE.Bus BMS Controlled — Automatic Load Protection\u003c\/h4\u003e\n\u003cp\u003eControlled directly by the Load Disconnect output of the VE.Bus BMS or SmallBMS — remaining engaged during normal operation and disconnecting the load immediately when the BMS output goes free floating due to imminent cell undervoltage, protecting the lithium battery bank from damaging over-discharge.\u003c\/p\u003e\n\u003ch4\u003eSwitches High-Current Loads Not Directly Controllable by BMS\u003c\/h4\u003e\n\u003cp\u003eDesigned for large inverters, high-current DC loads, and equipment that cannot be disabled directly by the BMS signal wire — providing a 230A relay-based load disconnection solution that the BMS can control regardless of the load type, brand, or current draw.\u003c\/p\u003e\n\u003ch4\u003eIntelligent Reengagement — Prevents False Recovery Reconnection\u003c\/h4\u003e\n\u003cp\u003eAfter load disconnection, the Cyrix-Li-Load waits 30 seconds before attempting to reengage. After three failed attempts, it remains disengaged until the battery voltage has held above the recharge threshold for at least 30 seconds — ensuring the load is only reconnected when the battery is genuinely recovering through active charging, not just momentarily under no-load conditions.\u003c\/p\u003e\n\u003ch4\u003eLED Status Indicator\u003c\/h4\u003e\n\u003cp\u003eA multi-state LED provides clear at-a-glance operational status: solid on (engaged), 10-second flash (disengaged), 2-second flash (connecting), 2-second blink (disconnecting), and rapid 0.25-second blink for alarm conditions including overtemperature, overvoltage, and critically low battery voltage.\u003c\/p\u003e\n\u003ch4\u003e1-Metre Control Cable Included\u003c\/h4\u003e\n\u003cp\u003eA 1-metre control cable is included in the box, connecting the VE.Bus BMS or SmallBMS Load Disconnect output to the Cyrix-Li-Load control input — providing a ready-to-install solution without requiring separate cable procurement for the BMS interface.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Transient Voltage Suppressor\u003c\/h4\u003e\n\u003cp\u003eA built-in transient voltage suppressor limits the voltage spike that occurs when the Cyrix-Li-Load suddenly disconnects a high-current load — protecting both the combiner and connected equipment from transient damage during emergency disconnection events.\u003c\/p\u003e\n\u003ch4\u003eAvailable in 12\/24V and 24\/48V Versions\u003c\/h4\u003e\n\u003cp\u003eAvailable in a 12\/24V version (CYR010230450) for 12V and 24V lithium battery systems, and a 24\/48V version (CYR020230450) for 24V and 48V systems — both rated at 230A continuous (80A breaking capacity at 48V) and identical in physical dimensions, IP rating, and included accessories.\u003c\/p\u003e\n\u003ch4\u003eIP54 Weatherproof Rating\u003c\/h4\u003e\n\u003cp\u003eRated IP54 for protection against dust ingress and water splashing from any direction, making the Cyrix-Li-Load 230A suitable for installation in marine, RV, and off-grid electrical compartments where moisture exposure is a risk.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Hy0gbc6Eyu8\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 99.9677%; height: 333.045px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 19.5909px;\"\u003eAvailable Versions\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 19.5909px;\"\u003e12\/24V-230A (CYR010230450) | 24\/48V-230A (CYR020230450)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 39.1818px;\"\u003eContinuous Current Rating\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 39.1818px;\"\u003e230A (at 12V or 24V) | 80A breaking capacity at 48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 39.1818px;\"\u003eDisconnect Trigger\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 39.1818px;\"\u003eControl input free floating (BMS Load Disconnect alarm) - immediate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 39.1818px;\"\u003eReengage Delay\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 39.1818px;\"\u003e30 seconds after BMS output returns high (max 3 attempts; then held off until battery recharging confirmed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 39.1818px;\"\u003eControl Input Logic\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 39.1818px;\"\u003eEngages when control input is high (≈ battery voltage) | Disengages when free floating or pulled low\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 19.5909px;\"\u003eControl Cable\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 19.5909px;\"\u003e1 metre (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 19.5909px;\"\u003eLED Status Indicator\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 19.5909px;\"\u003eYes - engaged \/ disengaged \/ connecting \/ disconnecting \/ alarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 39.1818px;\"\u003eCurrent Consumption (open)\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 39.1818px;\"\u003e\u0026lt; 4 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 19.5909px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 19.5909px;\"\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5909px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 19.5909px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 19.5909px;\"\u003e0.27 kg (0.6 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1818px;\"\u003e\n\u003ctd style=\"width: 24.0617%; height: 39.1818px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd style=\"width: 73.7059%; height: 39.1818px;\"\u003e65 × 100 × 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Cyrix-Li-ion-230-A-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"12\/24V","offer_id":47127238082809,"sku":"CBV20115","price":162.35,"currency_code":"USD","in_stock":true},{"title":"24\/48V","offer_id":47127238115577,"sku":"CBV20118","price":162.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-CBV20115-1.webp?v=1779267155"},{"product_id":"victron-cyrix-li-charge-230a-battery-combiner","title":"Victron Cyrix-Li-Charge 230A Battery Combiner","description":"\u003cp\u003eThe Victron Cyrix-Li-Charge 230A is a microprocessor-controlled, VE.Bus BMS-managed battery combiner designed to automatically connect and disconnect an alternator, charger, or other charging source to a Victron LiFePO₄ battery bank — acting as a second line of protection against cell overvoltage and overtemperature in high-current lithium battery systems. Available in two voltage versions — 12\/24V (CYR010230430) and 24\/48V (CYR020230430) — both rated at 230A continuous, it provides automatic high-current charge switching without any voltage drop, making it suitable for large alternators, multi-stage chargers, and high-current charging sources in demanding lithium battery installations where the 120A model would be undersized.\u003c\/p\u003e\n\u003cp\u003eThe Cyrix-Li-Charge 230A works in combination with the VE.Bus BMS or SmallBMS. The Charge Disconnect output of the BMS — which is normally high and goes free floating in the event of cell overvoltage or overtemperature — is connected to the 1-metre control cable included with the combiner. When the BMS output is high (normal operation) and the charger output voltage is at or above the connect threshold (13.0V for 12V systems, 26.0V for 24V systems, 52.0V for 48V systems), the Cyrix-Li-Charge connects the charger to the battery after a 3-second delay. When the BMS Charge Disconnect output goes free floating — signalling a cell overvoltage or overtemperature fault — the Cyrix-Li-Charge disconnects the charger immediately, protecting the lithium battery bank.\u003c\/p\u003e\n\u003cp\u003eThe Cyrix-Li-Charge 230A addresses the need to control high-current charging sources that cannot be directly switched off by the VE.Bus BMS Charge Disconnect output — such as large alternators, industrial battery chargers, and high-current DC-DC converters that require a relay to break the charging circuit rather than a signal wire to disable them. A built-in transient voltage suppressor limits voltage spikes that may occur when the Cyrix-Li-Charge suddenly disconnects an active charging source, protecting both the Cyrix and connected equipment from transient damage.\u003c\/p\u003e\n\u003cp\u003eThe 230A model offers double the continuous current capacity of the 120A Cyrix-Li-Charge, with a breaking capacity of 80A at 48V — making it the correct choice for large parallel battery banks and high-current charging systems. A LED status indicator shows engaged, disengaged, connecting, disconnecting, and alarm states at a glance. The 1-metre control cable is included in the box.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eVE.Bus BMS Controlled — Automatic Charge Protection\u003c\/h4\u003e\n\u003cp\u003eControlled directly by the Charge Disconnect output of the VE.Bus BMS or SmallBMS — connecting the charger when the BMS output is high (normal operation) and disconnecting it immediately when the BMS output goes free floating due to cell overvoltage or overtemperature, providing automatic second-line-of-defence protection for the lithium battery bank.\u003c\/p\u003e\n\u003ch4\u003eSwitches High-Current Charging Sources Not Directly Controllable by BMS\u003c\/h4\u003e\n\u003cp\u003eDesigned for large alternators, industrial battery chargers, and high-current DC-DC converters that cannot be disabled directly by the BMS signal wire — providing a 230A relay-based charge interruption solution that the BMS can control regardless of the charging source type or brand.\u003c\/p\u003e\n\u003ch4\u003eVoltage-Sensing Connection Logic — No Unnecessary Switching\u003c\/h4\u003e\n\u003cp\u003eThe Cyrix-Li-Charge 230A only connects the charger when it senses that the charger output voltage is at or above the connect threshold (13.0V \/ 26.0V \/ 52.0V) — preventing connection of a dead or off charger and avoiding unnecessary relay cycling. Connection occurs with a 3-second delay; disconnection on BMS fault is immediate.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Reconnection After Cell Overvoltage Reset\u003c\/h4\u003e\n\u003cp\u003eIn the event of a cell overvoltage alarm, the BMS disconnects charging. Once the overvoltage condition resets after charging has stopped, the Cyrix-Li-Charge 230A automatically reconnects the charger after a 3-second delay — restoring charging without manual intervention once the fault is cleared.\u003c\/p\u003e\n\u003ch4\u003eHourly Reconnect Check\u003c\/h4\u003e\n\u003cp\u003eWhen the Cyrix-Li-Charge is engaged, it disconnects briefly every hour to verify that the charger is still active. If the charger output immediately returns to the connect threshold voltage, the Cyrix reconnects with a 3-second delay — preventing silent charger failures from going undetected over long charge periods.\u003c\/p\u003e\n\u003ch4\u003eLED Status Indicator\u003c\/h4\u003e\n\u003cp\u003eA multi-state LED provides clear at-a-glance operational status: solid on (engaged), 10-second flash (disengaged), 2-second flash (connecting), 2-second blink (disconnecting), and rapid 0.25-second blink for alarm conditions including overtemperature, overvoltage, and critically low battery voltage.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Transient Voltage Suppressor\u003c\/h4\u003e\n\u003cp\u003eA built-in transient voltage suppressor limits the voltage spike that occurs when the Cyrix-Li-Charge 230A suddenly disconnects an active charging source — protecting both the combiner and connected equipment from transient damage during emergency disconnection events.\u003c\/p\u003e\n\u003ch4\u003e1-Metre Control Cable Included\u003c\/h4\u003e\n\u003cp\u003eA 1-metre control cable is included in the box, connecting the VE.Bus BMS or SmallBMS Charge Disconnect output to the Cyrix-Li-Charge 230A control input — providing a ready-to-install solution without requiring separate cable procurement for the BMS interface.\u003c\/p\u003e\n\u003ch4\u003eAvailable in 12\/24V and 24\/48V Versions\u003c\/h4\u003e\n\u003cp\u003eAvailable in a 12\/24V version (CYR010230430) for 12V and 24V lithium battery systems, and a 24\/48V version (CYR020230430) for 24V and 48V systems — both rated at 230A continuous (80A breaking capacity at 48V) and identical in physical dimensions, IP rating, and included accessories.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Hy0gbc6Eyu8\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 100.036%; height: 333.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eAvailable Versions\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003e12\/24V-230A (CYR010230430) | 24\/48V-230A (CYR020230430)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 39.2px;\"\u003eContinuous Current Rating\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 39.2px;\"\u003e230A (at 12V or 24V) | 80A breaking capacity at 48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eConnect Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003e13.0V (12V) \/ 26.0V (24V) \/ 52.0V (48V) - charger terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eConnection Delay\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003e3 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 39.2px;\"\u003eDisconnect Trigger\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 39.2px;\"\u003eControl input free floating (BMS Charge Disconnect alarm) - immediate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 39.2px;\"\u003eControl Input Logic\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 39.2px;\"\u003eEngages when control input is high (≈ battery voltage) | Disengages when free floating or pulled low\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eControl Cable\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003e1 metre (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eLED Status Indicator\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003eYes - engaged \/ disengaged \/ connecting \/ disconnecting \/ alarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 39.2px;\"\u003eCurrent Consumption (open)\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 39.2px;\"\u003e\u0026lt; 4 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 19.6px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 19.6px;\"\u003e0.27 kg (0.6 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 24.7727%; height: 39.2px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd style=\"width: 72.7674%; height: 39.2px;\"\u003e65 × 100 × 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Cyrix-Li-ion-230-A-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"12\/24V","offer_id":47127238181113,"sku":"CBV20121","price":162.35,"currency_code":"USD","in_stock":true},{"title":"24\/48V","offer_id":47127238213881,"sku":"CBV20124","price":162.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-CBV20121-1.webp?v=1779270976"},{"product_id":"victron-battery-management-system-12-200","title":"Victron Smart Battery Management System 12\/200","description":"\u003cp\u003eThe Victron Smart BMS 12\/200 is an all-in-one Battery Management System designed specifically for 12V systems using Victron Lithium Battery Smart 12.8V (LiFePO₄) batteries — particularly in vehicles and boats equipped with a 12V alternator. Combining a Current Limiter, Battery Combiner, and Battery Protector in a single compact unit, it provides comprehensive protection and control for both the lithium battery bank and the alternator in a way that conventional BMS solutions cannot.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the Smart BMS 12\/200 is its dedicated Alternator\/Starter Batt+ port, which electronically limits input current to approximately 90% of the installed fuse rating — preventing alternator overload and protecting the lithium battery from excessive charge current. One-way traffic from the alternator to the battery ensures the starter battery is never drained by the lithium bank. Simultaneously, the System+ port supports up to 200A continuous charge and discharge current in both directions for connecting inverters, inverter\/chargers, solar chargers, and DC loads.\u003c\/p\u003e\n\u003cp\u003eThe Smart BMS 12\/200 continuously monitors each individual battery cell and automatically disconnects the alternator, charge sources, or DC loads in the event of low cell voltage, high cell voltage, or overtemperature — protecting the battery bank from damage under any operating condition. A pre-alarm output provides an early warning signal via relay, LED, or buzzer before the BMS triggers a full disconnect.\u003c\/p\u003e\n\u003cp\u003eBuilt-in Bluetooth Smart enables monitoring and configuration via the VictronConnect app, including Instant Readout — which displays key BMS values in real time in the device list without requiring a paired connection. A programmable remote on\/off terminal supports multiple operating modes for flexible system control. Using MOSFET switches throughout, the Smart BMS 12\/200 is fully ignition-proof and rated IP65 for electronics protection.\u003c\/p\u003e\n\u003cp\u003eSupporting up to 20 batteries in parallel for a maximum of 84 kWh of energy storage, the Victron Smart BMS 12\/200 is the ideal all-in-one BMS solution for 12V lithium battery systems in marine, RV, and professional vehicle applications.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eIntegrated Alternator Protection and Current Limiting\u003c\/h4\u003e\n\u003cp\u003eThe dedicated Alternator\/Starter Batt+ port electronically limits input current to approximately 90% of the fuse rating — preventing alternator overload and protecting the lithium battery from excessive charge current. A 100A fuse, for example, limits input to approximately 90A, making any size 12V alternator safe to connect directly to the lithium battery bank.\u003c\/p\u003e\n\u003ch4\u003e200A System+ Power Port\u003c\/h4\u003e\n\u003cp\u003eThe System+ port supports up to 200A continuous current in both charge and discharge directions, enabling direct connection of inverters, inverter\/chargers, solar chargers, and DC loads to the lithium battery — with a peak discharge capability of 400A for short-duration surge demands.\u003c\/p\u003e\n\u003ch4\u003eIndividual Cell Monitoring and Automatic Disconnect\u003c\/h4\u003e\n\u003cp\u003eThe Smart BMS 12\/200 monitors each individual cell within every connected battery and automatically disconnects the alternator, charge sources, or DC loads in the event of low cell voltage, high cell voltage, or overtemperature — providing comprehensive protection across all operating conditions.\u003c\/p\u003e\n\u003ch4\u003eBluetooth Smart with Instant Readout\u003c\/h4\u003e\n\u003cp\u003eBuilt-in Bluetooth Smart pairs with the VictronConnect app for real-time monitoring and full configuration. Instant Readout displays key BMS parameters — including warnings, alarms, and errors — directly in the VictronConnect device list without requiring a paired connection, enabling at-a-glance diagnostics.\u003c\/p\u003e\n\u003ch4\u003ePre-Alarm Output\u003c\/h4\u003e\n\u003cp\u003eA dedicated pre-alarm output provides an early warning signal before the BMS triggers a full battery disconnect. It can drive a relay, LED indicator, or acoustic buzzer to alert the user in time to take preventive action and avoid a system shutdown.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Remote On\/Off Terminal\u003c\/h4\u003e\n\u003cp\u003eThe remote on\/off terminal supports multiple configurable operating modes — interrupting only the Alternator port, interrupting both the Alternator and System+ ports, or shutting down the entire system including the BMS — providing flexible system control to suit different installation requirements.\u003c\/p\u003e\n\u003ch4\u003eMOSFET Switches — Ignition Proof\u003c\/h4\u003e\n\u003cp\u003eAll switching within the Smart BMS 12\/200 is performed by MOSFET transistors rather than mechanical relays, making the unit fully ignition-proof and suitable for use in fuel vapour environments on boats and vehicles.\u003c\/p\u003e\n\u003ch4\u003eSupports Up to 20 Batteries — 84 kWh Maximum\u003c\/h4\u003e\n\u003cp\u003eUp to 20 Victron Lithium Battery Smart 12.8V batteries can be connected in parallel to a single Smart BMS 12\/200, enabling a maximum energy storage capacity of 84 kWh in a 12V system — scalable without any additional BMS hardware.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Voltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternator Port-Max Charge Current\u003c\/td\u003e\n\u003ctd\u003e100A (with 125A fuse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem+ Port-Max Continuous Current\u003c\/td\u003e\n\u003ctd\u003e200A (charge and discharge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Discharge Current\u003c\/td\u003e\n\u003ctd\u003e400A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Disconnect Output\u003c\/td\u003e\n\u003ctd\u003eNormally high (Vbat-0.1V), source current limit: 10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-Alarm Output\u003c\/td\u003e\n\u003ctd\u003eHigh (Vbat) in alarm, max. 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating (Electronics)\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e65 × 120 × 340 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Smart-BMS-12-200-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Smart_BMS_12-200\/28949-Smart_BMS_-_Manual-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127238246649,"sku":"CBV20130","price":232.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-CBV20130-1.webp?v=1778951860"},{"product_id":"victron-galvanic-isolator","title":"Victron Galvanic Isolator 16A 32A 64A","description":"\u003cp\u003eThe Victron Galvanic Isolator (VDI-16, VDI-32, VDI-64) is a passive shore power earth protection device designed to prevent electrolytic corrosion of a vessel's underwater metals — including the hull, propeller, shaft, and through-hull fittings — caused by low-voltage DC galvanic currents flowing through the shore power earth (PE) wire. Available in three current ratings — 16A, 32A, and 64A — the isolator is installed directly in the shore power earth conductor, in series between the shore earth connection and the vessel's earth network.\u003c\/p\u003e\n\u003cp\u003eThe galvanic isolator works by using two silicon diodes connected in an anti-parallel configuration. In this arrangement the diodes allow AC fault current to pass in both directions — ensuring the safety earth remains fully functional for personal protection and RCD operation in the event of a fault — but block any DC current below the diode conduction threshold of approximately 1.4 VDC. Since the electrochemical potential difference between dissimilar metals in seawater is typically below 1.4V, the isolator prevents galvanic currents from flowing between the vessel and the marina earth system without compromising the integrity of the safety earth circuit.\u003c\/p\u003e\n\u003cp\u003eThe isolator is distinct from a full galvanic isolation transformer, which provides complete electrical isolation between shore power and the vessel. The galvanic isolator is a lower-cost solution that addresses the most common cause of galvanic corrosion — stray DC currents via the shore earth — while retaining the direct earth connection required by electrical safety standards. For complete isolation, the Victron Isolation Transformer range should be used instead.\u003c\/p\u003e\n\u003cp\u003eAll three models are fully potted in resin, housed in an anodised aluminium heatsink enclosure, and rated IP67 — making them suitable for installation in bilges, engine rooms, and battery compartments where moisture, oil, and condensation are present. M6 terminals accept appropriately sized earth cable connections. Each model is supplied with mounting hardware.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003ePrevents Galvanic Corrosion via Shore Power Earth\u003c\/h4\u003e\n\u003cp\u003eBlocks low-voltage DC galvanic currents below approximately 1.4 VDC from flowing through the shore power earth wire — protecting the vessel's hull, propeller, shaft, anodes, and through-hull fittings from the accelerated electrolytic corrosion caused by being connected to a marina earth network.\u003c\/p\u003e\n\u003ch4\u003eAnti-Parallel Diode Design — Safety Earth Remains Intact\u003c\/h4\u003e\n\u003cp\u003eTwo silicon diodes connected in anti-parallel allow full AC fault current to pass in both directions above the 1.4 VDC threshold — ensuring the shore power safety earth and RCD protection remain fully functional for personal safety, while blocking the sub-threshold DC galvanic currents that cause corrosion.\u003c\/p\u003e\n\u003ch4\u003eAvailable in 16A, 32A, and 64A Ratings\u003c\/h4\u003e\n\u003cp\u003eThree current ratings cover the full range of standard shore power connections: VDI-16 (16A) for single-phase 16A shore connections, VDI-32 (32A) for 32A shore connections, and VDI-64 (64A) for 63A shore connections on larger vessels. All three share the same M6 terminal connection and IP67 protection rating.\u003c\/p\u003e\n\u003ch4\u003eIP67 Fully Potted and Waterproof Construction\u003c\/h4\u003e\n\u003cp\u003eThe electronics are fully encapsulated in resin within an anodised aluminium heatsink enclosure rated IP67 — providing complete protection against dust ingress and temporary submersion, making all three models suitable for installation in bilges, engine rooms, and wet compartments.\u003c\/p\u003e\n\u003ch4\u003eHigh Peak Current Capability — Fault Current Safe\u003c\/h4\u003e\n\u003cp\u003ePeak surge current ratings of 1600A (VDI-16), 3200A (VDI-32), and 6000A (VDI-64) for 20 milliseconds ensure the isolator can withstand the high transient fault currents that occur during earth fault events — allowing the RCD to trip and clear the fault safely without destroying the isolator.\u003c\/p\u003e\n\u003ch4\u003eSimple Series Installation in Shore Earth Cable\u003c\/h4\u003e\n\u003cp\u003eInstalled in series in the shore power earth (PE\/green) conductor, between the shore earth connection and the vessel's earth busbar — ensuring all vessel earth connections are protected by the isolator. Installation requires no configuration, programming, or power supply — it is a fully passive device.\u003c\/p\u003e\n\u003ch4\u003eLower-Cost Alternative to Isolation Transformer\u003c\/h4\u003e\n\u003cp\u003eThe galvanic isolator addresses DC galvanic corrosion via the shore earth at significantly lower cost and space than a full isolation transformer. For complete galvanic isolation including elimination of the direct shore earth connection, Victron's Isolation Transformer range is the appropriate solution.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVDI-16 (GDI000016000)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVDI-32 (GDI000032000)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVDI-64 (GDI000064000)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Continuous Current\u003c\/td\u003e\n\u003ctd\u003e16A\u003c\/td\u003e\n\u003ctd\u003e32A\u003c\/td\u003e\n\u003ctd\u003e64A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Current (20ms)\u003c\/td\u003e\n\u003ctd\u003e1600A\u003c\/td\u003e\n\u003ctd\u003e3200A\u003c\/td\u003e\n\u003ctd\u003e6000A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eM6 terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Material\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eAnodised aluminium (fully potted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e60 × 120 × 200 mm\u003c\/td\u003e\n\u003ctd\u003e63 × 164 × 200 mm\u003c\/td\u003e\n\u003ctd\u003e63 × 164 × 335 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Galvanic-Isolator-EN-NL-FR-DE-ES-IT-TR.pdf\" target=\"_blank\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"VDI-16 (16A)","offer_id":47127239065849,"sku":"GIV13020","price":109.65,"currency_code":"USD","in_stock":true},{"title":"VDI-32 (32A)","offer_id":47127239098617,"sku":"GIV13025","price":249.05,"currency_code":"USD","in_stock":true},{"title":"VDI-64 (64A)","offer_id":47127239131385,"sku":"GIV13030","price":305.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-GIV13020-1.webp?v=1779555356"},{"product_id":"victron-ve-bus-bms-v2","title":"Victron VE.Bus BMS V2","description":"\u003cp\u003eThe Victron VE.Bus BMS V2 is the next-generation Battery Management System designed to interface with and protect Victron Lithium Battery Smart (LiFePO₄) batteries in systems that include Victron inverters or inverter\/chargers with VE.Bus communication. Compatible with 12.8V and 25.6V Lithium Battery Smart batteries, it supports system voltages of 12V, 24V, and 48V, with a maximum of 20 batteries per system — enabling energy storage of up to 84 kWh in a 12V system and up to 102 kWh in a 24V or 48V system.\u003c\/p\u003e\n\u003cp\u003eThe VE.Bus BMS V2 continuously monitors each individual battery cell for overvoltage, undervoltage, overtemperature, and undertemperature conditions via BMS cables with M8 circular connectors. In multi-battery installations, the BMS cables of each battery are daisy-chained in series. Based on battery status, the BMS automatically generates pre-alarm signals, disables inverting via VE.Bus in the event of cell undervoltage, and disables charging via VE.Bus, VE.Direct, and VE.Can solar chargers (through a GX device) in the event of cell overvoltage or temperature faults.\u003c\/p\u003e\n\u003cp\u003eVE.Bus inverters and inverter\/chargers such as the MultiPlus and Quattro connect to the BMS via the dedicated MultiPlus\/Quattro RJ45 port using a standard UTP cable. A GX device, Digital Multi Control (DMC) panel, or VE.Bus Smart dongle can be connected to the Remote panel port for remote on\/off\/charger-only control of the inverter\/charger. A dedicated GX-Power output terminal keeps the GX device powered at all times, and an Aux-In terminal allows an external power supply to maintain GX operation even during a full system shutdown.\u003c\/p\u003e\n\u003cp\u003eRemote on\/off terminals allow a switch or relay contact to turn the entire system on or off, with the BMS supporting multiple wiring modes for flexible integration. Three LED indicators provide clear operational status — blue for normal operation, red for cell overvoltage or overtemperature, and blue for load disconnect active with healthy cell voltage.\u003c\/p\u003e\n\u003cp\u003eHoused in a compact matt-black ABS enclosure and rated IP20, the Victron VE.Bus BMS V2 is designed for reliable long-term operation in a wide range of off-grid, marine, RV, and renewable energy storage installations.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eIndividual Cell Protection for Lithium Battery Smart Packs\u003c\/h4\u003e\n\u003cp\u003eThe VE.Bus BMS V2 monitors each individual cell within every connected Victron Lithium Battery Smart battery for overvoltage, undervoltage, overtemperature, and undertemperature conditions — providing comprehensive protection that goes beyond simple battery-level voltage monitoring.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Load and Charge Disconnection\u003c\/h4\u003e\n\u003cp\u003eIn the event of a cell undervoltage fault, the BMS disables inverting via VE.Bus and signals the Load Disconnect output to shed DC loads. In the event of cell overvoltage or temperature faults, the BMS disables charging across VE.Bus inverter\/chargers, VE.Direct and VE.Can solar chargers via a GX device, and other chargers via the Charge Disconnect terminal.\u003c\/p\u003e\n\u003ch4\u003ePre-Alarm Warning Output\u003c\/h4\u003e\n\u003cp\u003eA dedicated pre-alarm output generates an early warning signal before an imminent cell undervoltage condition triggers a full load disconnect — allowing connected devices or an audible alarm to alert users in time to take corrective action.\u003c\/p\u003e\n\u003ch4\u003eVE.Bus Integration with MultiPlus and Quattro\u003c\/h4\u003e\n\u003cp\u003eConnects directly to Victron MultiPlus, Quattro, and VE.Bus inverters via two RJ45 sockets using a standard UTP cable, enabling precise charge and invert control through the VE.Bus communication protocol without additional interface hardware.\u003c\/p\u003e\n\u003ch4\u003eRemote Panel and GX Device Support\u003c\/h4\u003e\n\u003cp\u003eA dedicated Remote panel port allows connection of a Cerbo GX or other GX device, a Digital Multi Control panel, or a VE.Bus Smart dongle — individually or in combination — for full remote on\/off\/charger-only control of the VE.Bus inverter\/charger.\u003c\/p\u003e\n\u003ch4\u003eAuxiliary GX Power Input and Output\u003c\/h4\u003e\n\u003cp\u003eThe dedicated GX-Power output keeps a connected GX device powered continuously. The Aux-In terminal allows an external power supply to maintain GX device operation during system shutdown events, preserving VRM remote access even when the battery bank is offline.\u003c\/p\u003e\n\u003ch4\u003eSupports up to 20 Batteries — 12V, 24V, and 48V Systems\u003c\/h4\u003e\n\u003cp\u003eA maximum of 20 Victron Lithium Battery Smart batteries can be connected to a single VE.Bus BMS V2 in series, parallel, or series\/parallel configurations — supporting system voltages of 12V, 24V, or 48V and up to 102 kWh of total energy storage.\u003c\/p\u003e\n\u003ch4\u003eLED Status Indicators\u003c\/h4\u003e\n\u003cp\u003eThree onboard LEDs provide clear at-a-glance system status: a blue status LED flashes every 10 seconds during normal operation; a red LED indicates cell overvoltage or overtemperature; and a second blue LED confirms that the load disconnect output is active with cell voltages above 2.8V.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9-70 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Battery Voltages\u003c\/td\u003e\n\u003ctd\u003e12.8V and 25.6V (Victron Lithium Battery Smart)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Batteries per System\u003c\/td\u003e\n\u003ctd\u003e20 batteries (up to 102 kWh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVE.Bus Communication Port\u003c\/td\u003e\n\u003ctd\u003e2 × RJ45 sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Disconnect Output\u003c\/td\u003e\n\u003ctd\u003eSource current limit: 1A (normally high, floating on disconnect)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Disconnect Output\u003c\/td\u003e\n\u003ctd\u003eSource current limit: 10mA (normally high, floating on disconnect)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e120 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e23.8 × 94.5 × 105.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-VE-Bus-BMS-V2-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/VE.Bus_BMS_V2\/111619-VE_Bus_BMS_V2_-_Manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127242244345,"sku":"IVV50241","price":156.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50241-1.webp?v=1778934934"},{"product_id":"victron-energy-skylla-ip65-battery-charger","title":"Victron Skylla IP65 Battery Charger","description":"\u003cp\u003eThe Victron Skylla-IP65 is a powerful, waterproof, and intelligent professional battery charger available in four configurations for 12V and 24V battery systems — 12V\/70A (1+1), 12V\/70A (3 outputs), 24V\/35A (1+1), and 24V\/35A (3 outputs). Built in a steel epoxy powder-coated blue enclosure rated IP65, it withstands heat, humidity, and salt air — making it an ideal high-current charging solution for demanding marine, mobile, and industrial applications. A seven-stage adaptive charge algorithm, CAN-bus connectivity, built-in LCD display, and synchronised parallel operation capability complete its professional feature set.\u003c\/p\u003e\n\u003cp\u003eThe (1+1) output configuration features two isolated outputs — the main output delivering the full rated charge current, and a second output limited to approximately 3A trickle charge with a slightly lower voltage for simultaneously maintaining a separate starter battery. The (3 output) configuration provides three fully isolated outputs, each capable of supplying the full rated charge current — allowing up to three separate battery banks to be charged at full current simultaneously. The maximum combined output current is capped at the rated current in the (3) configuration (70A total for 12V; 35A total for 24V), distributed across the three outputs based on battery demand.\u003c\/p\u003e\n\u003cp\u003eA wide 90–265V AC input range with automatic 120\/230V selection and 45–65 Hz frequency compatibility makes all four models genuine worldwide products — maintaining full output current at any mains voltage from 90V upward. The power factor is an exceptional 0.98, minimising reactive current draw on shore power connections. CAN-bus (VE.Can \/ NMEA 2000) communication via two RJ45 sockets enables synchronised parallel operation of multiple chargers, connection to the Skylla-i Control GX remote panel, and integration with Victron GX devices for full VRM remote monitoring.\u003c\/p\u003e\n\u003cp\u003eEvery Skylla-IP65 is supplied with a battery temperature sensor — when connected, the charge voltage is automatically adjusted based on battery temperature to prevent overcharging in warm conditions and undercharging in cold conditions. Voltage sense terminals compensate for cable resistance to ensure the battery always receives the correct charge voltage regardless of cable length.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eSeven-Stage Adaptive Charge Algorithm\u003c\/h4\u003e\n\u003cp\u003eThe full seven-stage algorithm — Bulk, Absorption, Float, Storage, Refresh, BatterySafe, and Li-Ion — optimises every charge cycle for maximum battery health. Variable absorption time automatically adjusts based on discharge depth — keeping absorption short after shallow discharges and extending it after deep discharges. BatterySafe mode limits the rate of voltage rise to prevent excessive gassing when high absorption voltages are set.\u003c\/p\u003e\n\u003ch4\u003e(1+1) and (3 Output) Configurations\u003c\/h4\u003e\n\u003cp\u003eThe (1+1) variant provides a full-rated main output plus a dedicated 3A trickle charge output for a separate starter battery — ideal for two-bank systems. The (3 output) variant provides three fully isolated outputs each capable of full rated current — ideal for three-bank systems. Maximum combined output is 70A (12V) or 35A (24V) in both (3) output configurations.\u003c\/p\u003e\n\u003ch4\u003eIP65 Steel Enclosure — Marine and Industrial Grade\u003c\/h4\u003e\n\u003cp\u003eThe steel epoxy powder-coated blue (RAL5012) enclosure with IP65 rating provides complete dust protection and water jet resistance — built to withstand heat, humidity, and salt air. Circuit boards are acrylic coated for maximum corrosion resistance in permanently wet or salt-laden environments.\u003c\/p\u003e\n\u003ch4\u003eCAN-bus (VE.Can \/ NMEA 2000) Interface — Synchronised Parallel Operation\u003c\/h4\u003e\n\u003cp\u003eTwo RJ45 CAN-bus sockets enable multiple Skylla-IP65 chargers to be connected in parallel and synchronised via VE.Can — with combined output current and input current limit managed as a single charger group. Also enables connection to the Skylla-i Control GX remote panel and integration with Victron GX devices for VRM remote monitoring and control.\u003c\/p\u003e\n\u003ch4\u003eLCD Display — Status Monitoring and Parameter Configuration\u003c\/h4\u003e\n\u003cp\u003eAn onboard LCD display provides real-time charge status monitoring and direct access to charge algorithm settings — enabling battery type, absorption voltage, float voltage, and charge current to be configured at the charger without requiring a computer, app, or remote panel.\u003c\/p\u003e\n\u003ch4\u003eLi-Ion (LiFePO₄) Ready — Remote On\/Off and CAN-Bus Control\u003c\/h4\u003e\n\u003cp\u003eLi-Ion BMS integration is supported via two methods: simple on\/off control by connecting a relay or optocoupler output from a Li-Ion BMS to the remote on\/off port, or complete voltage and current control via the CAN-bus port — enabling the Skylla-IP65 to work seamlessly with both simple and sophisticated lithium battery management systems.\u003c\/p\u003e\n\u003ch4\u003eBattery Temperature Sensor Included — Temperature-Compensated Charging\u003c\/h4\u003e\n\u003cp\u003eA battery temperature sensor is supplied with every Skylla-IP65 and connects directly to the charger. When fitted, the charge voltage is automatically adjusted based on live battery temperature — extending battery life by preventing overcharging in warm environments and ensuring complete charging in cold conditions.\u003c\/p\u003e\n\u003ch4\u003eStorage Mode — Extended Battery Life During Inactivity\u003c\/h4\u003e\n\u003cp\u003eStorage mode activates automatically after 24 hours without a discharge event — reducing float voltage to 2.2V\/cell (13.2V for 12V, 26.4V for 24V) to minimise plate corrosion and gassing during inactivity. A weekly absorption refresh cycle prevents electrolyte stratification and sulphation.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\/70 (1+1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12\/70 (3)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/35 (1+1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/35 (3)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eSKY012070000\u003c\/td\u003e\n\u003ctd\u003eSKY012070100\u003c\/td\u003e\n\u003ctd\u003eSKY024035000\u003c\/td\u003e\n\u003ctd\u003eSKY024035100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e90-265 VAC (120\/230V auto), 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax AC Input Current (@ 100V)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e12A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e0.98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Current (main outputs)\u003c\/td\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003ctd\u003e3 × 70A (max total: 70A)\u003c\/td\u003e\n\u003ctd\u003e35A\u003c\/td\u003e\n\u003ctd\u003e3 × 35A (max total: 35A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStarter Battery Output (1+1 only)\u003c\/td\u003e\n\u003ctd\u003e3A trickle\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e3A trickle\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14.4V\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e28.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e13.8V\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e27.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Voltage\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e13.2V\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e26.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Algorithm\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e7-stage adaptive (Lead-acid) | 3-stage with on\/off or CAN-bus control (Li-Ion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Battery Capacity\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e350-700 Ah\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e150-350 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN-bus \/ VE.Can Port\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e2 × RJ45 (NMEA 2000 protocol, non-isolated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Relay\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eDPST-240VAC\/4A | 35VDC\/4A | 60VDC\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e−20°C to +60°C (full output up to +40°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e6 kg (14 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e401 × 265 × 151 mm (16 × 10.5 × 6 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Skylla-IP65-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Skylla-IP65\/22926-Skylla-IP65-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"12V\/70A(1+1)","offer_id":48442161266937,"sku":"BCV60670","price":759.05,"currency_code":"USD","in_stock":true},{"title":"24V\/35A(1+1)","offer_id":48442161201401,"sku":"BCV60635","price":759.05,"currency_code":"USD","in_stock":true},{"title":"12V\/70A(3 Output)","offer_id":48442161234169,"sku":"BCV60671","price":836.4,"currency_code":"USD","in_stock":true},{"title":"24V\/35A(3 Output)","offer_id":48442161168633,"sku":"BCV60640","price":836.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV60635-1.webp?v=1779696917"},{"product_id":"victron-centaur-12v-3bank-battery-charger","title":"Victron Centaur 12V 3Bank Battery Charger","description":"\u003cp\u003eThe Victron Centaur Battery Charger is a professional-grade, three-bank automatic battery charger designed for marine, RV, and off-grid applications requiring simultaneous charging of up to three independent 12V battery banks from a single charger. Available in seven output current ratings — 20A, 30A, 40A, 50A, 60A, 80A, and 100A — all models feature a three-stage Bulk\/Absorption\/Float charging algorithm, universal AC and DC input, and three fully isolated outputs each capable of delivering the full rated charge current independently.\u003c\/p\u003e\n\u003cp\u003eAll Centaur models operate without adjustment over a 90–265V AC input range at 50 or 60 Hz, and also accept a 90–400V DC supply — making each model a genuine worldwide product and a capable DC-DC charging converter in diesel-electric and hybrid generator systems. Unlike many chargers that claim universal input but reduce output power at the extremes of the range, the Centaur maintains full output current throughout its entire specified input voltage range.\u003c\/p\u003e\n\u003cp\u003eThe three isolated DC outputs allow each battery bank to be charged at the full rated current independently — a key distinction from chargers that split the total current across outputs. Each output uses a common negative rail but independent positive terminals, with any single output capable of supplying 100% of the rated charge current when only one battery is connected. A DIP switch on the PCB selects the appropriate absorption and float voltages for Flooded Lead-Acid, GEL, or AGM battery chemistry — with the charger defaulting to GEL settings from the factory.\u003c\/p\u003e\n\u003cp\u003eTemperature compensation is provided by an internal sensor, adjusting charge voltage at −2 mV\/°C per cell to correct for ambient temperature changes during the charge cycle. The aluminium, epoxy powder-coated enclosure with drip shield and stainless steel fixings is designed to withstand the heat, humidity, and salt air of marine environments, with circuit boards acrylic coated for maximum corrosion resistance. CE and UL certified, the Centaur is suitable for both European and North American installations.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eThree Fully Isolated Outputs — Each Capable of Full Rated Current\u003c\/h4\u003e\n\u003cp\u003eThree isolated DC outputs charge up to three separate battery banks simultaneously. Critically, each output is capable of supplying the full rated charge current independently — so a 60A Centaur can deliver all 60A to a single battery if only one bank is connected, rather than dividing the current equally across outputs.\u003c\/p\u003e\n\u003ch4\u003eUniversal AC and DC Input — Worldwide Operation\u003c\/h4\u003e\n\u003cp\u003eAll models accept 90–265V AC at 45–65 Hz without any adjustment or switching — maintaining full output power throughout the entire input range. The charger also accepts 90–400V DC input, making it suitable as a DC-DC charging converter in diesel-electric systems and hybrid generator installations.\u003c\/p\u003e\n\u003ch4\u003eThree-Stage Bulk \/ Absorption \/ Float Charging\u003c\/h4\u003e\n\u003cp\u003eThe fully automatic three-stage charging algorithm charges at maximum bulk current until output reduces to 70% of rated current, then initiates a four-hour timed absorption phase before switching to float. The charger can remain connected indefinitely in float mode without risk of overcharging or excessive gassing.\u003c\/p\u003e\n\u003ch4\u003eDIP Switch Battery Type Selection — Flooded, GEL, AGM\u003c\/h4\u003e\n\u003cp\u003eA DIP switch on the PCB selects the optimum absorption and float voltages for Flooded Lead-Acid, GEL, or AGM batteries — with individual absorption voltages of 14.5V (LA), 14.3V (AGM), 14.2V (GEL), and 14.7V (Other) — ensuring correct charging for any standard lead-acid battery chemistry.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Compensated Charging\u003c\/h4\u003e\n\u003cp\u003eAn internal temperature sensor automatically adjusts charge voltage at −2 mV\/°C per cell (−1 mV\/°F per cell) throughout the charge cycle — compensating for ambient temperature changes and ensuring accurate absorption and float voltages in hot engine rooms and cold winter installations.\u003c\/p\u003e\n\u003ch4\u003eAluminium Epoxy Powder-Coated Marine Enclosure\u003c\/h4\u003e\n\u003cp\u003eThe aluminium enclosure with epoxy powder coating, drip shield, and stainless steel fixings is built to withstand the heat, humidity, and salt air exposure typical of marine installations. Circuit boards are acrylic coated for maximum corrosion resistance and long-term reliability in adverse environments.\u003c\/p\u003e\n\u003ch4\u003eCE and UL Certified — Global Compliance\u003c\/h4\u003e\n\u003cp\u003eAll Centaur models meet the requirements of both CE (European) and UL (United States) standards — making them suitable for installation on vessels and in vehicles for both European and North American markets without requiring separate model variants.\u003c\/p\u003e\n\u003ch4\u003eFloor and Wall Mountable\u003c\/h4\u003e\n\u003cp\u003eSuitable for both floor and wall mounting, with vertical orientation recommended for optimum cooling. A wall mounting bracket is included. Maximum battery cable length is 6 metres, with minimum cable cross-sections specified per model in the installation manual.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable style=\"width: 143.01%; height: 411.6px;\" class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 19.6px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/20\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/30\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/40\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/50\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/60\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/80\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/100\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 19.6px;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012020000\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012030000\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012040000\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012050000\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012060000\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012080000\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003eCCH012100000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eCharge Current\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e20A\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e30A\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e40A\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e50A\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e60A\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e80A\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eRecommended Battery\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e80-200Ah\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e120-300Ah\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e160-400Ah\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e200-500Ah\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e240-600Ah\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e320–800Ah\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e400–1000Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eInput Voltage (AC)\u003c\/td\u003e\n\u003ctd style=\"width: 82.765%; height: 39.2px;\" colspan=\"7\"\u003e90-265 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eInput Voltage (DC)\u003c\/td\u003e\n\u003ctd style=\"width: 82.765%; height: 39.2px;\" colspan=\"7\"\u003e90-400 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eAbsorption Voltage (AGM)\u003c\/td\u003e\n\u003ctd style=\"width: 82.765%; height: 39.2px;\" colspan=\"7\"\u003e14.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eFloat Voltage (GEL)\u003c\/td\u003e\n\u003ctd style=\"width: 82.765%; height: 39.2px;\" colspan=\"7\"\u003e13.5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eNumber of Outputs\u003c\/td\u003e\n\u003ctd style=\"width: 82.765%; height: 39.2px;\" colspan=\"7\"\u003e3 (fully isolated, each capable of full rated current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eTemperature Compensation\u003c\/td\u003e\n\u003ctd style=\"width: 82.765%; height: 39.2px;\" colspan=\"7\"\u003e−2 mV\/°C per cell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 19.6px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e3.8 kg\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e3.8 kg\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e5 kg\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e5 kg\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e5 kg\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e12 kg\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 19.6px;\"\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 11.6132%; height: 39.2px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e351x214x110 mm\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e351x214x110 mm\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e437x239x110 mm\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e437x239x110 mm\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e437x239x110 mm\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e514x252x123 mm\u003c\/td\u003e\n\u003ctd style=\"width: 11.8236%; height: 39.2px;\"\u003e514x252x123 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Centaur-Charger-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Centaur-charger-EN-NL-FR-DE-IT.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"12\/20A","offer_id":48426596892921,"sku":"BCV60520","price":380.8,"currency_code":"USD","in_stock":true},{"title":"12\/30A","offer_id":48426596925689,"sku":"BCV60530","price":422.45,"currency_code":"USD","in_stock":true},{"title":"12\/40A","offer_id":48426596958457,"sku":"BCV60540","price":519.35,"currency_code":"USD","in_stock":true},{"title":"12\/50A","offer_id":48426596991225,"sku":"BCV60550","price":539.75,"currency_code":"USD","in_stock":true},{"title":"12\/60A","offer_id":48426597023993,"sku":"BCV60560","price":560.15,"currency_code":"USD","in_stock":true},{"title":"12\/80A","offer_id":48426597056761,"sku":"BCV60580","price":930.75,"currency_code":"USD","in_stock":true},{"title":"12\/100A","offer_id":48426597089529,"sku":"BCV60595","price":1032.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV60521-1.webp?v=1779340760"},{"product_id":"victron-centaur-24v-3bank-battery-charger","title":"Victron Centaur 24V\/3Bank Battery Charger","description":"\u003cp\u003eThe Victron Centaur 24V Battery Charger is a professional-grade, three-bank automatic battery charger designed for marine, RV, and off-grid applications requiring simultaneous charging of up to three independent 24V battery banks. Available in four output current ratings — 16A, 30A, 40A, and 60A — all models feature a three-stage Bulk\/Absorption\/Float charging algorithm, universal AC and DC input, and three fully isolated outputs each capable of delivering the full rated charge current independently.\u003c\/p\u003e\n\u003cp\u003eAll Centaur 24V models operate without adjustment over a 90–265V AC input range at 50 or 60 Hz, and also accept a 90–400V DC supply — making each model a genuine worldwide product and a capable DC-DC charging converter in diesel-electric and hybrid generator systems. Unlike many chargers that claim universal input but reduce output power at the extremes of the range, the Centaur maintains full output current throughout its entire specified input voltage range.\u003c\/p\u003e\n\u003cp\u003eThe three isolated DC outputs allow each 24V battery bank to be charged at the full rated current independently — a key distinction from chargers that split the total current across outputs. Each output uses a common negative rail but independent positive terminals, with any single output capable of supplying 100% of the rated charge current when only one battery is connected. A DIP switch on the PCB selects the appropriate absorption and float voltages for Flooded Lead-Acid, GEL, or AGM battery chemistry — with the charger defaulting to GEL settings from the factory.\u003c\/p\u003e\n\u003cp\u003eTemperature compensation is provided by an internal sensor, adjusting charge voltage at −2 mV\/°C per cell to correct for ambient temperature changes during the charge cycle. The aluminium, epoxy powder-coated enclosure with drip shield and stainless steel fixings is designed to withstand the heat, humidity, and salt air of marine environments, with circuit boards acrylic coated for maximum corrosion resistance. CE and UL certified, the Centaur is suitable for both European and North American installations.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eThree Fully Isolated Outputs — Each Capable of Full Rated Current\u003c\/h4\u003e\n\u003cp\u003eThree isolated DC outputs charge up to three separate 24V battery banks simultaneously. Each output is capable of supplying the full rated charge current independently — so a 40A Centaur can deliver all 40A to a single battery bank if only one bank is connected, rather than dividing the current equally across outputs.\u003c\/p\u003e\n\u003ch4\u003eUniversal AC and DC Input — Worldwide Operation\u003c\/h4\u003e\n\u003cp\u003eAll models accept 90–265V AC at 45–65 Hz without any adjustment or switching — maintaining full output power throughout the entire input range. The charger also accepts 90–400V DC input, making it suitable as a DC-DC charging converter in diesel-electric systems and hybrid generator installations.\u003c\/p\u003e\n\u003ch4\u003eThree-Stage Bulk \/ Absorption \/ Float Charging\u003c\/h4\u003e\n\u003cp\u003eThe fully automatic three-stage charging algorithm charges at maximum bulk current until output reduces to 70% of rated current, then initiates a four-hour timed absorption phase before switching to float. The charger can remain connected indefinitely in float mode without risk of overcharging or excessive gassing.\u003c\/p\u003e\n\u003ch4\u003eDIP Switch Battery Type Selection — Flooded, GEL, AGM\u003c\/h4\u003e\n\u003cp\u003eA DIP switch on the PCB selects the optimum absorption and float voltages for Flooded Lead-Acid, GEL, or AGM batteries — with individual absorption voltages of 29.0V (LA), 28.7V (AGM), 28.4V (GEL), and 29.4V (Other) — ensuring correct charging for any standard 24V lead-acid battery chemistry.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Compensated Charging\u003c\/h4\u003e\n\u003cp\u003eAn internal temperature sensor automatically adjusts charge voltage at −2 mV\/°C per cell (−1 mV\/°F per cell) throughout the charge cycle — compensating for ambient temperature changes and ensuring accurate absorption and float voltages in hot engine rooms and cold winter installations.\u003c\/p\u003e\n\u003ch4\u003eAluminium Epoxy Powder-Coated Marine Enclosure\u003c\/h4\u003e\n\u003cp\u003eThe aluminium enclosure with epoxy powder coating, drip shield, and stainless steel fixings is built to withstand the heat, humidity, and salt air exposure typical of marine installations. Circuit boards are acrylic coated for maximum corrosion resistance and long-term reliability in adverse environments.\u003c\/p\u003e\n\u003ch4\u003eCE and UL Certified — Global Compliance\u003c\/h4\u003e\n\u003cp\u003eAll Centaur 24V models meet the requirements of both CE (European) and UL (United States) standards — making them suitable for installation on vessels and in vehicles for both European and North American markets without requiring separate regional variants.\u003c\/p\u003e\n\u003ch4\u003eFloor and Wall Mountable\u003c\/h4\u003e\n\u003cp\u003eSuitable for both floor and wall mounting, with vertical orientation recommended for optimum cooling. A wall mounting bracket is included. Maximum battery cable length is 6 metres, with minimum cable cross-sections specified per model in the installation manual.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/16\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/30\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/40\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/60\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCCH024016000\u003c\/td\u003e\n\u003ctd\u003eCCH024030000\u003c\/td\u003e\n\u003ctd\u003eCCH024040000\u003c\/td\u003e\n\u003ctd\u003eCCH024060000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Current\u003c\/td\u003e\n\u003ctd\u003e16A\u003c\/td\u003e\n\u003ctd\u003e30A\u003c\/td\u003e\n\u003ctd\u003e40A\u003c\/td\u003e\n\u003ctd\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Battery Capacity\u003c\/td\u003e\n\u003ctd\u003e45-150 Ah\u003c\/td\u003e\n\u003ctd\u003e120-300 Ah\u003c\/td\u003e\n\u003ctd\u003e160-400 Ah\u003c\/td\u003e\n\u003ctd\u003e240-600 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage (AC)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e90-265 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage (DC)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e90-400 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage (GEL \/ LA \/ AGM)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e28.4V \/ 29.0V \/ 28.7V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage (GEL \/ LA \/ AGM)\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e27.0V \/ 27.0V \/ 26.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Outputs\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e3 (fully isolated, each capable of full rated current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Compensation\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e−2 mV\/°C per cell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.8 kg\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd\u003e351x214x110 mm\u003c\/td\u003e\n\u003ctd\u003e437x239x110 mm\u003c\/td\u003e\n\u003ctd\u003e514x252x123 mm\u003c\/td\u003e\n\u003ctd\u003e514x252x123 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Centaur-Charger-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Centaur-charger-EN-NL-FR-DE-IT.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"16A\/24V","offer_id":48426767024377,"sku":"BCV60514","price":467.5,"currency_code":"USD","in_stock":true},{"title":"30A\/24V","offer_id":48426767057145,"sku":"BCV60534","price":653.65,"currency_code":"USD","in_stock":true},{"title":"40A\/24V","offer_id":48426767089913,"sku":"BCV60544","price":853.4,"currency_code":"USD","in_stock":true},{"title":"60A\/24V","offer_id":48426767122681,"sku":"BCV60564","price":887.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV60514-1.webp?v=1779347543"},{"product_id":"victron-phoenix-24v-2-bank-1aux-battery-charger","title":"Victron Phoenix 24V\/2 Bank + 1Aux Battery Charger","description":"\u003cp\u003eThe Victron Phoenix Battery Charger is a professional-grade, industrial-quality automatic charger designed to simultaneously charge two main 24V battery banks and maintain a third auxiliary (starter) battery — all from a single unit. Available in two output current ratings — 24\/16A and 24\/25A — both models feature a microprocessor-controlled adaptive four-stage charging algorithm, universal AC input, two full-rated main outputs, and one 4A trickle charge output, making them an ideal solution for marine, RV, and off-grid installations with multiple 24V battery banks.\u003c\/p\u003e\n\u003cp\u003eThe adaptive charging algorithm automatically optimises the charge process based on how the battery is being used. After a deep discharge the absorption time is automatically extended to ensure a full recharge. After only a shallow discharge the absorption time is kept short to prevent overcharging. BatterySafe Mode gradually raises the applied voltage to the absorption set point to protect batteries from damage due to excessive gassing during rapid charging. Storage (All Season) Mode reduces float voltage after one day of float charge to minimise water loss during long periods of inactivity, with a weekly repeated absorption cycle to keep batteries in condition.\u003c\/p\u003e\n\u003cp\u003eBoth main outputs (Output +1 and Output +2) share the full rated bulk charge current — meaning the total available charge current is distributed between the two banks based on their demand. The third trickle charge output delivers up to 4A continuously to maintain a starter battery or small auxiliary battery at full charge without risk of overcharging. An external Phoenix Charger Control remote panel (optional) connects via RJ45 and allows remote monitoring of charge status and temporary current limiting from up to 100 metres away.\u003c\/p\u003e\n\u003cp\u003eA factory-supplied temperature sensor connects directly to the charger and mounts on a battery terminal, providing temperature-compensated charge voltage adjustment throughout the entire charge cycle. Voltage sense terminals allow the charger to compensate for DC cable voltage drop, ensuring accurate charge voltage at the battery terminals regardless of cable length or resistance. The blue aluminium IP21 enclosure is suitable for floor and wall mounting in engine rooms, battery compartments, and electrical panels.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=pbvwaM0T9zJ9JVzf\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eAdaptive Four-Stage Charging Algorithm\u003c\/h4\u003e\n\u003cp\u003eThe microprocessor-controlled adaptive charging system automatically adjusts absorption time based on actual battery usage — keeping absorption short after shallow discharges to prevent overcharging, and extending it after deep discharges to ensure a complete recharge every cycle. Bulk, Absorption, Float, and Storage stages are all included.\u003c\/p\u003e\n\u003ch4\u003eBatterySafe Mode — Prevents Excessive Gassing\u003c\/h4\u003e\n\u003cp\u003eWhen a high absorption voltage has been set for rapid charging, BatterySafe Mode gradually increases the applied voltage to the absorption set point rather than applying it instantly — preventing battery damage from excessive gassing during the transition from bulk to absorption charging.\u003c\/p\u003e\n\u003ch4\u003eStorage (All Season) Mode — Reduces Battery Water Loss\u003c\/h4\u003e\n\u003cp\u003eAfter one day in float charge, the charger automatically reduces float voltage to 26.0V to minimise electrolyte water loss during long-term storage. A user-configurable repeated absorption cycle (default every 7 days, 1 hour) ensures batteries remain fully charged and sulphation-free throughout the storage period.\u003c\/p\u003e\n\u003ch4\u003eTwo Full-Rated Main Outputs and One 4A Trickle Output\u003c\/h4\u003e\n\u003cp\u003eBoth main battery bank outputs share the full rated bulk charge current — with distribution based on battery demand — while a dedicated third trickle charge output delivers up to 4A continuously to maintain a starter battery or small auxiliary battery. The third output uses a separate connection terminal and independent fusing.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Compensated Charging with Voltage Sense\u003c\/h4\u003e\n\u003cp\u003eThe included factory-fitted temperature sensor mounts to a battery terminal and continuously adjusts charge voltages based on actual battery temperature. Voltage sense terminals compensate for cable voltage drop, ensuring the battery receives the correct charge voltage regardless of cable length or resistance.\u003c\/p\u003e\n\u003ch4\u003eUniversal AC Input — Worldwide Operation\u003c\/h4\u003e\n\u003cp\u003eOperates across a 90–265V AC input range at 45–65 Hz without any adjustment — maintaining full rated output current from 187V upward, with a graduated derating below 187V down to 90V minimum. The power factor correction first stage ensures a near-unity power factor (≈1) across the full input range, minimising reactive power draw on the shore supply.\u003c\/p\u003e\n\u003ch4\u003eRemote Panel and RS-485 Interface\u003c\/h4\u003e\n\u003cp\u003eAn RJ45 connector on the charger accepts the optional Phoenix Charger Control remote panel — enabling remote monitoring of charge stage LEDs and temporary charge current limiting from up to 100 metres away. The same RS-485 interface allows connection to the Victron MK2-USB interface for full parameter configuration via VEConfigure software.\u003c\/p\u003e\n\u003ch4\u003eAluminium IP21 Blue Enclosure — Floor and Wall Mountable\u003c\/h4\u003e\n\u003cp\u003eThe blue aluminium RAL5012 epoxy powder-coated enclosure with IP21 protection is rated for installation in marine engine rooms, battery compartments, and electrical panels. Suitable for floor and wall mounting — vertical orientation recommended for optimum cooling. Noise level is below 45 dB(A).\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/16 (2+1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24\/25 (2+1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003ePCH024016001\u003c\/td\u003e\n\u003ctd\u003ePCH024025001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulk Charge Current (shared outputs +1 and +2)\u003c\/td\u003e\n\u003ctd\u003e16A\u003c\/td\u003e\n\u003ctd\u003e25A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrickle Charge Output (Output +3)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eMax. 4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Battery Capacity\u003c\/td\u003e\n\u003ctd\u003e45-100 Ah\u003c\/td\u003e\n\u003ctd\u003e100-200 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range (AC)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e90-265 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Input Current\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4A @ 230 VAC | 10A @ 120 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage (default — Gel)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e28.8 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage (default — Gel)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e27.6 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReduced Float Voltage (Storage Mode)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e26.0 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Adjustment Range\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e24.0-32.0 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e350 × 200 × 110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Battery-Charger-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/Manuals\/PhoenixCharger\/PCH-Manual-rev01_GB.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"16A\/24V","offer_id":48427500339449,"sku":"BCV60416","price":418.2,"currency_code":"USD","in_stock":true},{"title":"25A\/24V","offer_id":48427500372217,"sku":"BCV60425","price":621.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV60416-1.webp?v=1779383470"},{"product_id":"victron-phoenix-12v-2-bank-1aux-battery-charger","title":"Victron Phoenix 12V 2 Bank + 1Aux Battery Charger","description":"\u003cp\u003eThe Victron Phoenix Battery Charger is a professional-grade, industrial-quality automatic charger designed to simultaneously charge two main 12V battery banks and maintain a third auxiliary (starter) battery — all from a single unit. Available in two output current ratings — 12\/30A and 12\/50A — both models feature a microprocessor-controlled adaptive four-stage charging algorithm, universal AC input, two full-rated main outputs, and one 4A trickle charge output, making them an ideal solution for marine, RV, and off-grid installations with multiple battery banks.\u003c\/p\u003e\n\u003cp\u003eThe adaptive charging algorithm automatically optimises the charge process based on how the battery is being used. After a deep discharge the absorption time is automatically extended to ensure a full recharge. After only a shallow discharge the absorption time is kept short to prevent overcharging. BatterySafe Mode gradually raises the applied voltage to the absorption set point to protect batteries from damage due to excessive gassing during rapid charging. Storage (All Season) Mode reduces float voltage after one day of float charge to minimise water loss during long periods of inactivity, with a weekly repeated absorption cycle to keep batteries in condition.\u003c\/p\u003e\n\u003cp\u003eBoth main outputs (Output +1 and Output +2) share the full rated bulk charge current — meaning the total available charge current is distributed between the two banks based on their demand. The third trickle charge output delivers up to 4A continuously to maintain a starter battery or small auxiliary battery at full charge without risk of overcharging. An external Phoenix Charger Control remote panel (optional) connects via RJ45 and allows remote monitoring of charge status and temporary current limiting from up to 100 metres away.\u003c\/p\u003e\n\u003cp\u003eA factory-supplied temperature sensor connects directly to the charger and mounts on a battery terminal, providing temperature-compensated charge voltage adjustment throughout the entire charge cycle. Voltage sense terminals allow the charger to compensate for DC cable voltage drop, ensuring accurate charge voltage at the battery terminals regardless of cable length or resistance. The blue aluminium IP21 enclosure is suitable for floor and wall mounting in engine rooms, battery compartments, and electrical panels.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/V1Zceq02vMA?si=lPltpQDSBvQcpIrF\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eAdaptive Four-Stage Charging Algorithm\u003c\/h4\u003e\n\u003cp\u003eThe microprocessor-controlled adaptive charging system automatically adjusts absorption time based on actual battery usage — keeping absorption short after shallow discharges to prevent overcharging, and extending it after deep discharges to ensure a complete recharge every cycle. Bulk, Absorption, Float, and Storage stages are all included.\u003c\/p\u003e\n\u003ch4\u003eBatterySafe Mode — Prevents Excessive Gassing\u003c\/h4\u003e\n\u003cp\u003eWhen a high absorption voltage has been set for rapid charging, BatterySafe Mode gradually increases the applied voltage to the absorption set point rather than applying it instantly — preventing battery damage from excessive gassing during the transition from bulk to absorption charging.\u003c\/p\u003e\n\u003ch4\u003eStorage (All Season) Mode — Reduces Battery Water Loss\u003c\/h4\u003e\n\u003cp\u003eAfter one day in float charge, the charger automatically reduces float voltage to 13.0V (26.0V for 24V models) to minimise electrolyte water loss during long-term storage. A user-configurable repeated absorption cycle (default every 7 days, 1 hour) ensures batteries remain fully charged and sulphation-free throughout the storage period.\u003c\/p\u003e\n\u003ch4\u003eTwo Full-Rated Main Outputs and One 4A Trickle Output\u003c\/h4\u003e\n\u003cp\u003eBoth main battery bank outputs share the full rated bulk charge current — with distribution based on battery demand — while a dedicated third trickle charge output delivers up to 4A continuously to maintain a starter battery or small auxiliary battery. The third output uses a separate connection terminal and independent fusing.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Compensated Charging with Voltage Sense\u003c\/h4\u003e\n\u003cp\u003eThe included factory-fitted temperature sensor mounts to a battery terminal and continuously adjusts charge voltages based on actual battery temperature — as shown in the manual's temperature compensation graph. Voltage sense terminals compensate for cable voltage drop, ensuring the battery receives the correct charge voltage regardless of cable length or resistance.\u003c\/p\u003e\n\u003ch4\u003eUniversal AC Input — Worldwide Operation\u003c\/h4\u003e\n\u003cp\u003eOperates across a 90–265V AC input range at 45–65 Hz without any adjustment — maintaining full rated output current from 187V upward, with a graduated derating below 187V down to 90V minimum. The power factor correction first stage ensures a near-unity power factor (≈1) across the full input range, minimising reactive power draw on the shore supply.\u003c\/p\u003e\n\u003ch4\u003eRemote Panel and RS-485 Interface\u003c\/h4\u003e\n\u003cp\u003eAn RJ45 connector on the charger accepts the optional Phoenix Charger Control remote panel — enabling remote monitoring of charge stage LEDs and temporary charge current limiting from up to 100 metres away. The same RS-485 interface allows connection to the Victron MK2-USB interface for full parameter configuration via VEConfigure software.\u003c\/p\u003e\n\u003ch4\u003eAluminium IP21 Blue Enclosure — Floor and Wall Mountable\u003c\/h4\u003e\n\u003cp\u003eThe blue aluminium RAL5012 epoxy powder-coated enclosure with IP21 protection is rated for installation in marine engine rooms, battery compartments, and electrical panels. Suitable for floor and wall mounting — vertical orientation recommended for optimum cooling. Noise level is below 45 dB(A).\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 100.036%; height: 294px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 18.9349%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/30 (2+1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 18.9394%; height: 19.6px;\"\u003e\u003cstrong\u003e12\/50 (2+1)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"width: 18.9349%; height: 19.6px;\"\u003ePCH012030001\u003c\/td\u003e\n\u003ctd style=\"width: 18.9394%; height: 19.6px;\"\u003ePCH012050001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eBulk Charge Current (shared outputs +1 and +2)\u003c\/td\u003e\n\u003ctd style=\"width: 18.9349%; height: 19.6px;\"\u003e30A\u003c\/td\u003e\n\u003ctd style=\"width: 18.9394%; height: 19.6px;\"\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eTrickle Charge Output (Output +3)\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003eMax. 4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eRecommended Battery Capacity\u003c\/td\u003e\n\u003ctd style=\"width: 18.9349%; height: 19.6px;\"\u003e100-200 Ah\u003c\/td\u003e\n\u003ctd style=\"width: 18.9394%; height: 19.6px;\"\u003e200-400 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eInput Voltage Range (AC)\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e90-265 VAC, 45-65 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eMax Input Current\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e4A @ 230 VAC | 10A @ 120 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eAbsorption Voltage (default — Gel)\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e14.4 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eFloat Voltage (default — Gel)\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e13.8 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eReduced Float Voltage (Storage Mode)\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e13.0 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eVoltage Adjustment Range\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e12.0-16.0 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e3.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 58.7389%; height: 19.6px;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"width: 37.8743%; height: 19.6px;\"\u003e350 × 200 × 110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Battery-Charger-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/Manuals\/PhoenixCharger\/PCH-Manual-rev01_GB.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"30A\/12V","offer_id":48427215061241,"sku":"BCV60430","price":465.8,"currency_code":"USD","in_stock":true},{"title":"50A\/12V","offer_id":48427215094009,"sku":"BCV60450","price":621.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV60430-1.webp?v=1779370575"},{"product_id":"victron-energy-orion-tr-dc-dc-converter-12-12-18a","title":"Victron Energy Orion-Tr DC-DC Converter 12\/12-18A","description":"\u003cp\u003eThe Victron Orion-Tr 12\/12-18A is a fully isolated DC-DC converter that steps a 12V input to a 12V output at up to 18A continuous current (220W), for running 12V equipment from a 12V battery bank. Galvanic isolation of 200V DC between input, output, and case keeps the two electrical systems fully separated - important where the 12V and 12V negatives cannot share a common ground, such as many marine and vehicle installations.\u003c\/p\u003e\n\u003cp\u003eThe output voltage is adjustable within 10-15 V using the onboard potentiometer, though Victron does not recommend this converter for direct battery charging - for a dedicated battery-charging application, an Orion-Tr Smart charger is the better choice. Any number of units can be connected in parallel to increase available output current, and all models are short-circuit proof.\u003c\/p\u003e\n\u003cp\u003eA remote on\/off terminal eliminates the need for a high-current switch in the input wiring - the converter can be switched with a low-power switch or an external control signal such as an engine run\/stop switch. Current draw when disabled via the remote port drops to under 200 microamps.\u003c\/p\u003e\n\u003cp\u003eThe unit uses screw terminals for its DC connections, requires no special tools to install, and carries IP43 protection when mounted with the terminals oriented downwards. Output current is automatically reduced at high ambient temperature to protect the converter, with a full operating range of -20 to +55°C (derated 3% per °C above 40°C).\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\u003ch4\u003eFully Isolated - 200V Galvanic Separation\u003c\/h4\u003e\u003cp\u003eProvides 200V DC galvanic isolation between input, output, and case, keeping the 12V and 12V sides of the system fully separated - important where the two negatives cannot share a common ground.\u003c\/p\u003e\u003ch4\u003eAdjustable Output Voltage\u003c\/h4\u003e\u003cp\u003eOutput voltage is adjustable within 10-15 V via the onboard potentiometer. Victron does not recommend this converter for direct battery charging - see the Orion-Tr Smart range for a dedicated charging solution.\u003c\/p\u003e\u003ch4\u003eParallel Operation, Short-Circuit Proof\u003c\/h4\u003e\u003cp\u003eAny number of units can be connected in parallel to increase available output current, and all models are short-circuit proof.\u003c\/p\u003e\u003ch4\u003eRemote On\/Off Terminal\u003c\/h4\u003e\u003cp\u003eEliminates the need for a high-current switch in the input wiring - operate with a low-power switch or an external control signal such as an engine run\/stop switch. Draws under 200 microamps when disabled via the remote port.\u003c\/p\u003e\u003ch4\u003eScrew Terminals, IP43 Rated\u003c\/h4\u003e\u003cp\u003eUses screw terminals for DC connections with no special tools needed for installation, and carries IP43 protection when mounted with the terminals oriented downwards.\u003c\/p\u003e\u003ch4\u003eAutomatic Thermal Protection\u003c\/h4\u003e\u003cp\u003eOutput current is automatically reduced at high ambient temperature to protect the converter, across a full operating range of -20 to +55°C (derated 3% per °C above 40°C).\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage range\u003c\/td\u003e\n\u003ctd\u003e8-17 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal output voltage\u003c\/td\u003e\n\u003ctd\u003e12.2 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage adjust range\u003c\/td\u003e\n\u003ctd\u003e10-15 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous output current\u003c\/td\u003e\n\u003ctd\u003e18A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic isolation\u003c\/td\u003e\n\u003ctd\u003e200 VDC between input, output and case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg (4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e130 x 186 x 80 mm (5.1 x 7.3 x 3.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\u003cdiv\u003e\n\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Orion-Tr-DC-DC-converters-isolated-100-250-400W-EN.pdf\" style=\"display:flex;align-items:center;justify-content:space-between;gap:16px;border:1px solid #e2e2e2;border-radius:8px;padding:12px 16px;margin-bottom:10px;text-decoration:none;color:inherit;\" target=\"_blank\"\u003e\u003cspan style=\"display:flex;align-items:center;gap:12px;min-width:0;\"\u003e\u003cspan style=\"width:36px;height:36px;flex-shrink:0;background:#eef2f8;border-radius:6px;display:flex;align-items:center;justify-content:center;\"\u003e\u003csvg fill=\"none\" height=\"18\" style=\"display:block;\" viewbox=\"0 0 24 24\" width=\"18\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003cpath d=\"M14 2v6h6\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003cspan style=\"display:flex;flex-direction:column;min-width:0;\"\u003e\u003cspan style=\"font-weight:600;color:#111827;\"\u003eDatasheet\u003c\/span\u003e\u003cspan style=\"font-size:13px;color:#6b7280;\"\u003ePDF Document\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color:#3b6fd6;font-weight:500;white-space:nowrap;\"\u003eOpen\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Orion-Tr-isolated-DC-DC-converters-EN-FR-NL-ES-IT-DE.pdf\" style=\"display:flex;align-items:center;justify-content:space-between;gap:16px;border:1px solid #e2e2e2;border-radius:8px;padding:12px 16px;margin-bottom:10px;text-decoration:none;color:inherit;\" target=\"_blank\"\u003e\u003cspan style=\"display:flex;align-items:center;gap:12px;min-width:0;\"\u003e\u003cspan style=\"width:36px;height:36px;flex-shrink:0;background:#eef2f8;border-radius:6px;display:flex;align-items:center;justify-content:center;\"\u003e\u003csvg fill=\"none\" height=\"18\" style=\"display:block;\" viewbox=\"0 0 24 24\" width=\"18\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003cpath d=\"M14 2v6h6\" stroke=\"#3b6fd6\" stroke-linejoin=\"round\" stroke-width=\"1.8\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003cspan style=\"display:flex;flex-direction:column;min-width:0;\"\u003e\u003cspan style=\"font-weight:600;color:#111827;\"\u003eProduct Manual\u003c\/span\u003e\u003cspan style=\"font-size:13px;color:#6b7280;\"\u003ePDF Document\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color:#3b6fd6;font-weight:500;white-space:nowrap;\"\u003eOpen\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127245979897,"sku":"VCV70306","price":113.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/NEW_ORI121222110.png?v=1784621670"},{"product_id":"victron-orion-tr-12-24-15a-360w-isolated-dc-dc-converter","title":"Victron Orion-Tr 12\/24-15A (360W) Isolated DC-DC Converter","description":"\u003cp\u003eThe DC-DC converter is engineered for reliable power conversion in demanding automotive, marine, RV, and industrial applications. Its advanced remote on\/off functionality eliminates the need for a high-current switch in the input wiring, simplifying installation and reducing wiring complexity. The converter can be controlled using a low-power switch or integrated directly with an engine run\/stop switch, allowing seamless automation and convenient operation.\u003c\/p\u003e\n\u003cp\u003eDesigned with flexibility in mind, all models are fully short-circuit protected, ensuring safe and dependable performance even under fault conditions. For systems requiring higher output capacity, multiple units can be connected in parallel to increase available output current. There is no practical limit to the number of converters that can be paralleled, making the system highly scalable for growing power demands.\u003c\/p\u003e\n\u003cp\u003eThe converter features an IP43-rated enclosure when installed with the screw terminals facing downward, providing protection against solid objects and water spray. This makes it well-suited for environments where durability and reliability are essential.\u003c\/p\u003e\n\u003cp\u003eInstallation is quick and straightforward thanks to robust screw terminals that require no specialized tools. This user-friendly design reduces installation time and simplifies maintenance. Additionally, 12V and 24V input models include an integrated input fuse, providing an extra layer of protection for both the converter and connected equipment.\u003c\/p\u003e\n\u003cp\u003eCombining advanced protection features, flexible control options, scalable power capability, and easy installation, this DC-DC converter is an ideal solution for professional and recreational electrical systems that demand efficient and reliable power conversion.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eEfficient 12V to 24V DC Power Conversion\u003c\/h4\u003e\n\u003cp\u003eThe Victron Orion-Tr 12\/24-15A (360W) efficiently converts a 12V DC input into a stable 24V DC output with up to 88% efficiency. Its regulated output voltage ensures reliable operation of 24V equipment, even when the input voltage fluctuates due to battery discharge or alternator variations.\u003c\/p\u003e\n\n\u003ch4\u003eHigh 360W Continuous Power Output\u003c\/h4\u003e\n\u003cp\u003eDesigned for demanding DC applications, the converter delivers up to 15A of continuous output current at 24V, providing a maximum continuous output of 360 watts. This makes it ideal for powering 24V electronics, communication systems, lighting, and industrial equipment from a 12V battery source.\u003c\/p\u003e\n\n\u003ch4\u003eWide Input Voltage Range\u003c\/h4\u003e\n\u003cp\u003eThe converter operates over an input voltage range of 8 to 17V, allowing dependable performance with vehicle, marine, and off-grid battery systems. The wide operating range helps maintain a stable output even during engine cranking or varying battery conditions.\u003c\/p\u003e\n\n\u003ch4\u003eAdjustable Regulated Output Voltage\u003c\/h4\u003e\n\u003cp\u003eThe output voltage can be adjusted between 18V and 30V to match the requirements of connected equipment or compensate for cable voltage drop. Precise voltage regulation helps ensure sensitive devices receive consistent power under changing load conditions.\u003c\/p\u003e\n\n\u003ch4\u003eRemote On\/Off Control\u003c\/h4\u003e\n\u003cp\u003eA built-in remote on\/off connection allows the converter to be controlled by a low-current switch, ignition signal, or external relay. This simplifies system integration while eliminating the need for a high-current switch on the input wiring.\u003c\/p\u003e\n\n\u003ch4\u003eParallel Operation for Increased Capacity\u003c\/h4\u003e\n\u003cp\u003eMultiple Orion-Tr converters can be connected in parallel to increase total output current and power. This modular capability allows the system to expand as future power requirements grow without replacing existing equipment.\u003c\/p\u003e\n\n\u003ch4\u003eComprehensive Protection Features\u003c\/h4\u003e\n\u003cp\u003eThe converter includes protection against short circuits, over-temperature conditions, and low input voltage to safeguard both the converter and connected equipment. Automatic protection functions improve system reliability and help prevent damage during abnormal operating conditions.\u003c\/p\u003e\n\n\u003ch4\u003eMarine and Vehicle Ready Construction\u003c\/h4\u003e\n\u003cp\u003eBuilt for harsh operating environments, the Orion-Tr features IP43 protection when mounted correctly, durable screw terminal connections, and reliable operation in ambient temperatures from -20°C to +55°C. Its rugged design makes it well suited for marine, RV, commercial vehicle, and industrial installations.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Operating Range\u003c\/td\u003e\n\u003ctd\u003e12 to 17 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum AC input current\u003c\/td\u003e\n\u003ctd\u003e8 – 17 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Input Voltage\u003c\/td\u003e\n\u003ctd\u003e12 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Voltage\u003c\/td\u003e\n\u003ctd\u003e24.2 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Current\u003c\/td\u003e\n\u003ctd\u003e15 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Output Power\u003c\/td\u003e\n\u003ctd\u003e360 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Efficiency\u003c\/td\u003e\n\u003ctd\u003e88%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e200 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e4.50 × 4.00 × 1.90 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.87 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Orion-Tr-isolated-DC-DC-converters-EN-FR-NL-ES-IT-DE.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Orion-Tr-isolated-DC-DC-converters-EN-FR-NL-ES-IT-DE.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-MultiPlus-II-120V-EN.pdf\" target=\"_blank\"\u003eProduct Dimensions\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127246078201,"sku":"VCV70318","price":201.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-VCV70318-1.jpg?v=1781732793"},{"product_id":"victron-orion-110-24-15a-360w-isolated-dc-dc-converter","title":"Victron Orion 110\/24-15A (360W) Isolated DC-DC Converter","description":"\u003cp data-start=\"0\" data-end=\"381\"\u003eThe \u003cstrong data-start=\"4\" data-end=\"64\"\u003eVictron Orion 110\/24-15A (360W) Isolated DC-DC Converter\u003c\/strong\u003e is a high-performance power conversion solution designed to provide reliable and stable DC power in demanding mobile, marine, and industrial applications. Built by Victron Energy, this unit efficiently converts input voltage from 110V DC to a regulated 24V DC output, delivering up to 15A (360W) of continuous power.\u003c\/p\u003e\n\u003cp data-start=\"383\" data-end=\"764\"\u003eEngineered with full galvanic isolation between input and output, the Orion 110\/24-15A ensures maximum safety and protects sensitive electronics from voltage spikes, ground loops, and electrical interference. This makes it especially suitable for complex electrical systems found in boats, RVs, commercial vehicles, and off-grid installations where multiple power sources are used.\u003c\/p\u003e\n\u003cp data-start=\"766\" data-end=\"1044\"\u003eThe converter features high efficiency and low heat generation, allowing it to operate reliably even in enclosed or high-temperature environments. Its robust aluminum housing enhances durability and provides excellent protection against vibration and harsh operating conditions.\u003c\/p\u003e\n\u003cp data-start=\"1046\" data-end=\"1401\"\u003eInstallation is straightforward thanks to clearly labeled terminals and a compact design that allows flexible mounting in tight spaces. The Orion series is also known for its consistent output voltage, ensuring that sensitive equipment such as communication devices, navigation systems, and control electronics receive clean and stable power at all times.\u003c\/p\u003e\n\u003cp data-start=\"1403\" data-end=\"1775\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eWhether you are stepping down voltage in a marine electrical system or integrating multiple battery banks in a mobile power setup, the Victron Orion 110\/24-15A offers dependable performance, long service life, and professional-grade power management. It is a trusted choice for users who require efficiency, safety, and reliability in one compact DC-DC converter solution.\u003c\/p\u003e\n\u003cdiv class=\"victron-key-features\"\u003e\n\u003ch2\u003eKey Features \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide input voltage range:\u003c\/strong\u003e Operates from 110V DC (60–140V DC range), ideal for high-voltage battery systems and industrial applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable 24V output:\u003c\/strong\u003e Delivers a regulated 24V DC output at up to 15A (360W continuous power).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanic isolation:\u003c\/strong\u003e Provides full electrical isolation between input, output, and chassis for improved safety and noise reduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable output voltage:\u003c\/strong\u003e Output can be fine-tuned, allowing use as a DC-DC converter or battery charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off control:\u003c\/strong\u003e Enables low-power switching via ignition switch or external control signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-circuit \u0026amp; overload protection:\u003c\/strong\u003e Built-in electronic protection ensures safe operation under fault conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation capability:\u003c\/strong\u003e Multiple units can be connected in parallel to increase total output current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh efficiency design:\u003c\/strong\u003e Optimized for minimal energy loss and reliable long-term performance in demanding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged construction:\u003c\/strong\u003e IP43-rated enclosure (when mounted correctly) suitable for marine, automotive, and industrial use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy installation:\u003c\/strong\u003e Screw terminals and compact aluminum housing for straightforward mounting and wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-specifications\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eModel\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eVictron Orion 110\/24-15A (ORI110243610)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eType\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eIsolated DC-DC Converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eNominal Power\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e360 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eInput Voltage Range\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e60 – 140 V DC (nominal 110 V DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eOutput Voltage\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e24 V DC (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eOutput Current\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e15 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eGalvanic Isolation\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eYes (\u0026gt;400 Vrms input\/output\/case)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eEfficiency\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eHigh efficiency DC-DC conversion (approx. up to 90% depending on load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eProtection Features\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eShort circuit protection, over-temperature protection, over-voltage protection, reverse polarity protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eCooling\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFan-assisted \/ temperature controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eRemote On\/Off\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eYes (low-power switch or ignition controlled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eParallel Operation\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSupported (units can be paralleled to increase output current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eEnclosure Protection\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eIP43 (when installed with terminals facing downward)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eConnection Type\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eScrew terminals \/ flat blade connectors (depending on version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e-20°C to +55°C (derating above rated temperature)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eDimensions (H × W × D)\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e82 × 132 × 190 mm (3.2 × 5.2 × 7.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; border: 1px solid #ddd; padding: 8px;\"\u003eWeight\u003c\/th\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\n\u003cp\u003eApprox. 1.4 kg (3.1 lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/%20Datasheet-Orion-110-12V-30A-and-110-24V-15A-Isolated-DC-DC-converters-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/%20Manual-Orion-DC-DC-isolated-EN-NL-FR-DE.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e*with galvanic isolation*\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127246700793,"sku":"VCV70393","price":366.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-VCV70393-1.jpg?v=1781041561"},{"product_id":"victron-blue-smart-ip65-battery-charger-12v-7a-120vac","title":"Victron Blue Smart IP65 Battery Charger 12V 7A 120VAC","description":"\u003cp\u003eThe Victron Blue Smart IP65 Battery Charger 12V 7A is a professional-grade smart charger with built-in Bluetooth, designed to safely and efficiently charge and maintain 12V lead-acid and lithium (LiFePO₄) battery systems. Suitable for use in workshops, classic cars, motorcycles, boats, RVs, and camper-vans, it delivers intelligent multi-stage charging in a compact, fully protected enclosure.\u003c\/p\u003e\n\u003cp\u003ePowered by a seven-step adaptive charging algorithm, the Blue Smart IP65 automatically optimises the charge process to deliver exactly what the battery needs at every stage — from bulk charging through absorption, float, and long-term storage maintenance. The algorithm measures ambient temperature during the test phase and applies temperature-compensated charging throughout, eliminating the need for manual adjustments in hot or cold environments.\u003c\/p\u003e\n\u003cp\u003eWith built-in Bluetooth Smart, the charger pairs wirelessly with the VictronConnect app on iOS and Android devices, providing real-time voltage and current readouts, full configuration access, and charge status monitoring from a smartphone or tablet. Users can select from multiple pre-configured battery profiles or customise their own charging parameters to suit specific battery types and applications.\u003c\/p\u003e\n\u003cp\u003eThe Blue Smart IP65 12V 7A achieves up to 94% conversion efficiency, generating significantly less heat than conventional chargers and reducing standby power consumption to just 0.5W once the battery is fully charged. Its fanless, silent operation and IP65-rated enclosure make it resistant to dust, water splashes, and chemicals, ensuring dependable performance in demanding environments.\u003c\/p\u003e\n\u003cp\u003eA dedicated recovery function allows the charger to revive fully discharged batteries from as low as 0V by applying a low current until sufficient voltage is restored for normal charging to resume. This makes it particularly effective for seasonal storage applications, neglected batteries, and lithium batteries with integrated BMS units that need a charge current to reactivate.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/nLDEleTWDIM?si=KmRmfVigC8_DoxI5\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eSeven-Step Smart Charging Algorithm\u003c\/h4\u003e\n\u003cp\u003eThe Blue Smart IP65 uses a fully adaptive seven-step charging process — including test, bulk, absorption, float, storage, storage refresh, and optional reconditioning stages — to deliver precise, battery-optimised charging and long-term maintenance for lead-acid and lithium battery chemistries.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Bluetooth Connectivity\u003c\/h4\u003e\n\u003cp\u003eWith Bluetooth Smart built-in, no additional hardware is required. The charger connects directly to the VictronConnect app for real-time monitoring of voltage and current, full profile configuration, and charge status visibility on iOS and Android devices.\u003c\/p\u003e\n\u003ch4\u003eFully Discharged Battery Recovery\u003c\/h4\u003e\n\u003cp\u003eUnlike most reverse-polarity protected chargers, the Blue Smart IP65 will attempt to recover a battery that has been fully discharged to 0V by applying a safe low current and resuming normal charging once sufficient voltage is detected across the battery terminals.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Compensated Charging\u003c\/h4\u003e\n\u003cp\u003eThe charger measures ambient temperature during the test phase and automatically compensates charge voltage throughout the process, delivering accurate, optimised charging from -20°C to +50°C without requiring any special settings or manual adjustment.\u003c\/p\u003e\n\u003ch4\u003eUltra-High Efficiency - Up to 94%\u003c\/h4\u003e\n\u003cp\u003eWith up to 94% conversion efficiency, the Blue Smart IP65 12V 7A generates up to four times less heat than the industry standard. Once the battery is fully charged, standby power consumption drops to just 0.5W — five to ten times lower than typical chargers.\u003c\/p\u003e\n\u003ch4\u003eLi-Ion Battery Mode\u003c\/h4\u003e\n\u003cp\u003eA dedicated LiFePO₄ charging algorithm with automatic under-voltage protection reset ensures safe and efficient charging for lithium batteries, including those with integrated BMS units that require charge current to reactivate from a fully discharged state.\u003c\/p\u003e\n\u003ch4\u003eStorage Mode with Corrosion Protection\u003c\/h4\u003e\n\u003cp\u003eWhen a battery remains connected for more than 48 hours after reaching full charge, the Blue Smart IP65 automatically reduces the charge voltage to storage level, minimising grid corrosion on positive plates and extending battery service life during long-term storage.\u003c\/p\u003e\n\u003ch4\u003eIP65-Rated Enclosure-Durable, Safe and Silent\u003c\/h4\u003e\n\u003cp\u003eFully protected against dust, water splashes, and chemical exposure, the Blue Smart IP65 is designed for use in harsh environments. Its fanless design ensures completely silent operation, with no moving parts and low thermal stress on internal components for long-term reliability.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e100-130 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Voltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Current\u003c\/td\u003e\n\u003ctd\u003e7A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Current (Low Power Mode)\u003c\/td\u003e\n\u003ctd\u003e2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to +50°C (full rated output up to 30°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Category\u003c\/td\u003e\n\u003ctd\u003eIP65 (splash proof, dust proof, ignition protected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 kg (2.0 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003eSee Data Sheet \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Folder-A5-Blue-Smart-IP65-Charger-120V_EN_web.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href='https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Blue-Smart-IP65-Charger-120V-EN-FR-ES-.pdf\"' target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47127246766329,"sku":"BCV50005","price":129.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV50005-1.webp?v=1778668877"},{"product_id":"victron-blue-smart-ip65-battery-charger","title":"Victron Blue Smart IP65 Battery Charger","description":"\u003cp\u003eThe Victron Blue Smart IP65 Battery Charger is a professional-grade, Bluetooth-equipped smart charger designed for 12V and 24V lead-acid and LiFePO₄ battery banks in workshop, automotive, marine, RV, and off-grid applications. Available in three 120VAC variants for the North American market — 12V\/10A, 12V\/15A, and 24V\/8A — all models feature a seven-step adaptive charging algorithm, built-in Bluetooth for monitoring and configuration via the VictronConnect app, and a fully sealed IP65-rated enclosure that is dust-proof, splash-proof, and ignition-protected.\u003c\/p\u003e\n\u003cp\u003eThe seven-step charging algorithm — consisting of Test, Bulk, Absorption, Float, Storage, Storage Refresh, and optional Recondition phases — gets the best out of every battery type, automatically adapting the charge process based on battery condition, charge history, and ambient temperature. Temperature-compensated charging (16 mV\/°C for 12V models, 32 mV\/°C for 24V models) adjusts the charge voltage automatically based on measured ambient temperature — eliminating the need for special settings in hot or cold environments, and ensuring accurate charging down to −40°C and up to +60°C.\u003c\/p\u003e\n\u003cp\u003eA unique recovery function allows the Blue Smart IP65 to recharge deeply discharged batteries that have dropped to 0V — force-feeding a low current to recover cells that most other chargers would fail to recognise. Li-ion (LiFePO₄) mode uses a dedicated algorithm with automatic under-voltage protection reset, and Low Current mode halves the charge current for smaller batteries (3A for the 10A model, 4A for the 15A model, 3A for the 24V\/8A model). The charger can also be used as a DC power supply at the absorption voltage level when no battery is connected.\u003c\/p\u003e\n\u003cp\u003eAll three models connect to the battery via a 1.5-metre output cable supplied with both M8 eyelet connectors and a Battery Indicator eyelet M8, and to the mains via a 1.8-metre cable with a US NEMA 1-15 plug. M8 eyelets and a 2-metre extension cable are included in the box. Optional accessories include crocodile clamps, fused clamps, fused M6\/M8 eyelets, an Autoplug, Battery Indicator Panel, carry case, wall mount, and rubber bumper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/nLDEleTWDIM?si=ynf0CVRpyQhMViHc\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eSeven-Step Adaptive Charging Algorithm\u003c\/h4\u003e\n\u003cp\u003eThe full seven-step algorithm — Test, Bulk, Absorption, Float, Storage, Storage Refresh, and optional Recondition — optimises every charge cycle for maximum battery health and longevity, automatically adapting to battery condition and ambient temperature across all supported battery types.\u003c\/p\u003e\n\u003ch4\u003eBluetooth Smart with VictronConnect App\u003c\/h4\u003e\n\u003cp\u003eBuilt-in Bluetooth Smart pairs wirelessly with the VictronConnect app on iOS and Android, providing real-time readout of charge voltage and current, full charger configuration including battery type, charge algorithm, and expert mode settings, and live charge phase status — all from a smartphone without any additional hardware.\u003c\/p\u003e\n\u003ch4\u003eTemperature-Compensated Charging\u003c\/h4\u003e\n\u003cp\u003eAmbient temperature is measured during the Test phase and throughout the charge cycle, with charge voltage automatically adjusted at 16 mV\/°C (12V) or 32 mV\/°C (24V) — ensuring optimal charge voltage in both hot and cold environments without manual intervention. Temperature compensation is available for all lead-acid modes and disabled in Li-ion mode.\u003c\/p\u003e\n\u003ch4\u003eRecovery of Fully Discharged 'Dead' Batteries\u003c\/h4\u003e\n\u003cp\u003eUnlike most chargers, the Blue Smart IP65 will attempt to recharge a battery that has discharged to 0V by force-feeding a low current — resuming normal charging once sufficient terminal voltage has developed. This is particularly valuable for LiFePO₄ batteries with internal BMS units that require charge current to reactivate the BMS from a fully discharged state.\u003c\/p\u003e\n\u003ch4\u003eLi-ion (LiFePO₄) Battery Mode\u003c\/h4\u003e\n\u003cp\u003eA dedicated Li-ion charging algorithm with specific absorption, float (disabled), and storage voltages — and automatic under-voltage protection reset — ensures correct and safe charging of LiFePO₄ batteries without overcharging or float voltage stress on lithium cells.\u003c\/p\u003e\n\u003ch4\u003eLow Current Mode for Smaller Batteries\u003c\/h4\u003e\n\u003cp\u003eLow Current mode reduces the charge current to approximately 30% of the rated output (3A for the 10A model, 4A for the 15A model, 3A for the 24V\/8A model), making these chargers suitable for smaller batteries that would be stressed by the full rated charge current — selectable via the VictronConnect app.\u003c\/p\u003e\n\u003ch4\u003eStorage Mode — Reduces Battery Corrosion\u003c\/h4\u003e\n\u003cp\u003eAfter 48 hours in Float, the charger automatically transitions to Storage mode — reducing the charge voltage below the float level to minimise grid corrosion on positive plates during prolonged storage. A periodic Storage Refresh cycle ensures the battery remains fully charged throughout the storage period.\u003c\/p\u003e\n\u003ch4\u003eIP65 Sealed Enclosure — Dust, Water, and Ignition Protected\u003c\/h4\u003e\n\u003cp\u003eThe fully sealed IP65 enclosure is protected against dust ingress and water splashing from any direction, and is ignition-protected — making it suitable for installation near fuel vapours in marine engine rooms, fuel lockers, and vehicle installations without risk of ignition from the charger electronics.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12V \/ 10A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12V \/ 15A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e24V \/ 8A\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eBPC121031104R\u003c\/td\u003e\n\u003ctd\u003eBPC121531104R\u003c\/td\u003e\n\u003ctd\u003eBPC240831104R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e100-130 VAC (NEMA 1-15 plug)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Current\u003c\/td\u003e\n\u003ctd\u003e10A\u003c\/td\u003e\n\u003ctd\u003e15A\u003c\/td\u003e\n\u003ctd\u003e8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Current Mode\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003ctd\u003e4A\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Battery Range\u003c\/td\u003e\n\u003ctd\u003e30-100 Ah\u003c\/td\u003e\n\u003ctd\u003e50-150 Ah\u003c\/td\u003e\n\u003ctd\u003e30-80 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Voltage (Normal)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14.4V\u003c\/td\u003e\n\u003ctd\u003e28.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage (Normal)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e13.8V\u003c\/td\u003e\n\u003ctd\u003e27.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Voltage (Normal)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e13.2V\u003c\/td\u003e\n\u003ctd\u003e26.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd colspan=\"1\"\u003e94%\u003c\/td\u003e\n\u003ctd colspan=\"1\"\u003e94%\u003c\/td\u003e\n\u003ctd colspan=\"1\"\u003e95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e−20°C to +50°C (full output up to +30°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e0.9 kg (2.0 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.9 kg (2.0 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e60 × 105 × 190 mm\u003c\/td\u003e\n\u003ctd\u003e60 × 105 × 190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Folder-A5-Blue-Smart-IP65-Charger-120V_EN_web.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Blue-Smart-IP65-Charger-120V-EN-FR-ES-.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"12V 10A 120VAC","offer_id":48422937854201,"sku":"BCV50010","price":152.15,"currency_code":"USD","in_stock":true},{"title":"12V 15A 120VAC","offer_id":48422937821433,"sku":"BCV50015","price":175.95,"currency_code":"USD","in_stock":true},{"title":"24V 8A 120VAC","offer_id":48422937886969,"sku":"BCV50020","price":175.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BCV50010-1.webp?v=1779288703"},{"product_id":"victron-argo-fet-battery-isolator-100-200-amp-2-3-batteries","title":"Victron Argo FET Battery Isolator 100\/200 Amp, 2\/3 Batteries","description":"\u003cp\u003eThe Victron Argofet Battery Isolator is a FET-based battery isolator that allows one alternator or single-output battery charger to simultaneously charge two or three independent battery banks — without connecting the batteries together. Available in 100A and 200A versions with either 2 or 3 battery outputs, the Argofet range offers the same fundamental battery isolation function as conventional diode isolators, but with virtually no voltage drop — eliminating the need to increase the alternator output voltage to compensate for isolator losses.\u003c\/p\u003e\n\u003cp\u003eUnlike diode battery isolators, which typically cause a voltage drop of 0.5–0.7V across the Schottky diodes, the Argofet uses field-effect transistors (FETs) to perform isolation. The voltage drop is less than 0.02V at low current and averages just 0.1V at higher currents — meaning that batteries receive virtually the full alternator output voltage, enabling faster and more complete charging without any charger or alternator voltage adjustment. This is the primary and most important advantage of FET isolation over diode isolation in practical marine, RV, and vehicle installations.\u003c\/p\u003e\n\u003cp\u003eThe Argofet also incorporates a dedicated alternator energize input that solves a common problem with battery isolators: some alternators require DC voltage on the B+ terminal to begin charging. When a battery isolator is inserted between the alternator and the batteries, the return path is blocked and the alternator may fail to start charging. The Argofet's current-limited energize input supplies the necessary B+ voltage when the engine run\/stop switch is closed — enabling the alternator to start charging reliably without any modification to the alternator or its wiring.\u003c\/p\u003e\n\u003cp\u003eAll four Argofet models — 100-2, 100-3, 200-2, and 200-3 — share the same physical enclosure, M8 bolt connections, and aluminium heatsink construction. A blue LED illuminates when voltage is present on the input. The Argofet automatically adjusts to 12V and 24V systems without any configuration.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eVirtually No Voltage Drop — FET Technology\u003c\/h4\u003e\n\u003cp\u003eFET transistors replace conventional Schottky diodes, reducing voltage drop from a typical 0.5–0.7V (diode) to less than 0.02V at low current and an average of just 0.1V at higher currents — allowing batteries to be charged at virtually the full alternator output voltage for faster, more complete charging without any voltage adjustment.\u003c\/p\u003e\n\u003ch4\u003eSimultaneous Multi-Battery Charging from One Source\u003c\/h4\u003e\n\u003cp\u003eAllows one alternator or single-output charger to charge two or three separate battery banks simultaneously — keeping each bank electrically isolated from the others so that discharging one bank (such as an accessory or bow thruster battery) cannot discharge the starter battery or other banks.\u003c\/p\u003e\n\u003ch4\u003eAlternator Energize Input — Prevents Alternator Start Failure\u003c\/h4\u003e\n\u003cp\u003eA current-limited energize input supplies the DC voltage required by some alternators on the B+ terminal to begin charging — automatically powered when the engine run\/stop switch is closed. This eliminates the common problem of alternators failing to start charging when isolated from the battery by a diode or FET splitter.\u003c\/p\u003e\n\u003ch4\u003eAvailable in 100A and 200A — 2 or 3 Battery Outputs\u003c\/h4\u003e\n\u003cp\u003eAvailable in four configurations: Argofet 100-2 (100A, 2 batteries), Argofet 100-3 (100A, 3 batteries), Argofet 200-2 (200A, 2 batteries), and Argofet 200-3 (200A, 3 batteries) — covering installations from small two-battery marine systems up to large three-bank commercial or recreational vehicle installations at 200A alternator capacity.\u003c\/p\u003e\n\u003ch4\u003eAutomatic 12V \/ 24V System Detection\u003c\/h4\u003e\n\u003cp\u003eThe Argofet automatically adjusts to 12V or 24V system voltage — no configuration, jumpers, or voltage selection required. Both system voltages are supported across all four current and output configurations.\u003c\/p\u003e\n\u003ch4\u003eM8 Bolt Connections — Suitable for High-Current Cabling\u003c\/h4\u003e\n\u003cp\u003eAll input and output connections use M8 bolts, accepting cable lugs appropriate for the high-current cabling required at 100A and 200A — ensuring low-resistance, secure connections that will not loosen under vibration in marine and vehicle applications.\u003c\/p\u003e\n\u003ch4\u003eBlue LED Status Indicator\u003c\/h4\u003e\n\u003cp\u003eA blue LED illuminates when voltage is present on the Argofet input, providing an immediate visual confirmation that the isolator is energised and the alternator or charger input is live — without requiring any measurement or additional monitoring equipment.\u003c\/p\u003e\n\u003ch4\u003eDirect Replacement for Diode Battery Isolators\u003c\/h4\u003e\n\u003cp\u003eThe Argofet is a direct replacement for conventional diode battery isolators, using the same wiring topology with one input from the alternator and separate outputs to each battery bank — requiring no changes to system architecture, only the removal of the existing diode isolator and fitting of the Argofet in its place.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 1.58573%;\"\u003e\u003cstrong\u003eArgofet 100-2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.9574%;\"\u003e\u003cstrong\u003eArgofet 100-3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e\u003cstrong\u003eArgofet 200-2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e\u003cstrong\u003eArgofet 200-3\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"width: 1.58573%;\"\u003eARG100201020\u003c\/td\u003e\n\u003ctd style=\"width: 40.9574%;\"\u003eARG100301020\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003eARG200201020\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003eARG200301020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eMax Charge Current\u003c\/td\u003e\n\u003ctd style=\"width: 1.58573%;\"\u003e100A\u003c\/td\u003e\n\u003ctd style=\"width: 40.9574%;\"\u003e100A\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e200A\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eMax Alternator Current\u003c\/td\u003e\n\u003ctd style=\"width: 1.58573%;\"\u003e100A\u003c\/td\u003e\n\u003ctd style=\"width: 40.9574%;\"\u003e100A\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e200A\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eNumber of Battery Outputs\u003c\/td\u003e\n\u003ctd style=\"width: 1.58573%;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 40.9574%;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 20.4082%;\"\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eNominal Battery Voltage\u003c\/td\u003e\n\u003ctd colspan=\"4\" style=\"width: 83.3595%;\"\u003e12V and 24V (auto-detecting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eVoltage Drop\u003c\/td\u003e\n\u003ctd colspan=\"4\" style=\"width: 83.3595%;\"\u003e\u0026lt; 0.02V at low current | avg. 0.1V at higher currents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eConnection\u003c\/td\u003e\n\u003ctd colspan=\"4\" style=\"width: 83.3595%;\"\u003eM8 bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eWeight\u003c\/td\u003e\n\u003ctd colspan=\"4\" style=\"width: 83.3595%;\"\u003eSee Data Sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 15.3846%;\"\u003eDimensions (h × w × d)\u003c\/td\u003e\n\u003ctd colspan=\"4\" style=\"width: 83.3595%;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eSee Data Sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Argofet-Battery-Isolators-with-alternator-energize-input-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Argofet-EN-NL-FR-DE-IT-ES-SE-TR.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"2 Batteries 100 Amp","offer_id":48423300825337,"sku":"ISV20005","price":100.3,"currency_code":"USD","in_stock":true},{"title":"3 Batteries 100 Amp","offer_id":48423300858105,"sku":"ISV20010","price":114.75,"currency_code":"USD","in_stock":true},{"title":"2 Batteries 200 Amp","offer_id":47127260233977,"sku":"ISV20015","price":119.85,"currency_code":"USD","in_stock":true},{"title":"3 Batteries 200 Amp","offer_id":47127260266745,"sku":"ISV20020","price":140.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-ISV20005-1.webp?v=1779301340"},{"product_id":"victron-lead-carbon-106-a-hr","title":"Victron LEAD Carbon 106 A-Hr","description":"\u003cp\u003eThe Victron Lead Carbon Battery 12V 106Ah is an advanced VRLA lead-carbon battery engineered for intensive cycling applications where conventional lead-acid batteries fall short. By replacing the active material of the negative plate with a lead-carbon composite, it delivers significantly improved charge acceptance, reduced sulfation, and a longer service life — making it an ideal choice for off-grid, solar, marine, and RV energy storage systems.\u003c\/p\u003e\n\u003cp\u003eLead-carbon technology directly addresses the most common failure modes of flat plate VRLA batteries under heavy cycling. The carbon composite on the negative plate minimises sulfation during partial state-of-charge operation, while also enabling lower charge voltages that reduce corrosion on the positive plate and improve overall system efficiency.\u003c\/p\u003e\n\u003cp\u003eVictron's testing confirms a cycle life of at least 500 cycles at 100% depth of discharge, with performance extending to over 1,000 cycles at 60% DoD and more than 1,400 cycles at 40% DoD. This makes the Lead Carbon battery a robust and cost-effective solution for systems that experience frequent or deep discharge cycles.\u003c\/p\u003e\n\u003cp\u003eThe battery features M8 threaded insert terminals for secure and reliable connections, and its robust construction supports both float and cyclic service applications. Compatible with Victron chargers, inverter-chargers, and solar charge controllers, it integrates seamlessly into a wide range of Victron energy systems.\u003c\/p\u003e\n\u003cp\u003eBuilt to Victron's exacting standards and backed by their global support network, the Lead Carbon Battery 12V 106Ah offers a dependable and high-performance energy storage solution for demanding off-grid and mobile power applications where a more compact and lighter form factor is required.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eLead-Carbon Composite Negative Plate\u003c\/h4\u003e\n\u003cp\u003eThe negative plate active material is replaced with a lead-carbon composite, which reduces sulfation under partial state-of-charge conditions and significantly improves charge acceptance compared to standard VRLA lead-acid batteries.\u003c\/p\u003e\n\u003ch4\u003eExtended Cycle Life\u003c\/h4\u003e\n\u003cp\u003eVerified cycle performance of at least 500 cycles at 100% DoD, over 1,000 cycles at 60% DoD, and more than 1,400 cycles at 40% DoD — making this battery well suited for applications with frequent or deep discharge cycles.\u003c\/p\u003e\n\u003ch4\u003eLower Charge Voltage for Higher Efficiency\u003c\/h4\u003e\n\u003cp\u003eLead-carbon technology allows for reduced charge voltages, resulting in greater charging efficiency, lower heat generation, and reduced corrosion of the positive plate — all of which contribute to a longer service life.\u003c\/p\u003e\n\u003ch4\u003eImproved Partial State-of-Charge Performance\u003c\/h4\u003e\n\u003cp\u003eUnlike standard lead-acid batteries, the Lead Carbon battery can operate reliably in a partial state of charge without accelerated capacity loss — ideal for solar and off-grid applications where full recharge cycles are not always possible.\u003c\/p\u003e\n\u003ch4\u003eM8 Threaded Insert Terminals\u003c\/h4\u003e\n\u003cp\u003eEquipped with M8 threaded insert terminals, the battery provides a solid and corrosion-resistant connection point suitable for high-current applications and long-term reliability.\u003c\/p\u003e\n\u003ch4\u003eFloat and Cyclic Service Compatibility\u003c\/h4\u003e\n\u003cp\u003eSuitable for both float (standby) and cyclic service use, with recommended absorption voltages of 14.1–14.4V and float voltages of 13.5–13.8V, making it adaptable across a variety of installation types and charge profiles.\u003c\/p\u003e\n\u003ch4\u003eHigh Cold Cranking Amperage\u003c\/h4\u003e\n\u003cp\u003eWith a CCA rating of 500A at 0°F, the Lead Carbon 106Ah battery delivers strong starting and surge performance, adding versatility for applications requiring reliable high-current output.\u003c\/p\u003e\n\u003ch4\u003eWide System Compatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for seamless integration with Victron inverters, inverter-chargers, solar charge controllers, and battery monitors, the Lead Carbon battery fits naturally into new or existing Victron energy systems.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity (C20 to 10.8V)\u003c\/td\u003e\n\u003ctd\u003e106 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCycle Life\u003c\/td\u003e\n\u003ctd\u003e≥500 cycles @ 100% DoD \/ ≥1,000 cycles @ 60% DoD \/ ≥1,400 cycles @ 40% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Charge Voltage\u003c\/td\u003e\n\u003ctd\u003e14.1-14.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd\u003e13.5-13.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCold Cranking Amperage (CCA @ 0°F)\u003c\/td\u003e\n\u003ctd\u003e500A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8 threaded insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (l × w × h)\u003c\/td\u003e\n\u003ctd\u003e410 × 172 × 225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Lead-carbon-battery-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47128041816313,"sku":"BDV22106","price":454.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BDV22106-1.webp?v=1779276437"},{"product_id":"victron-lead-carbon-160-a-hr","title":"Victron LEAD Carbon 160 A-Hr","description":"\u003cp\u003eThe Victron Lead Carbon Battery 12V 160Ah is an advanced VRLA lead-carbon battery engineered for intensive cycling applications where conventional lead-acid batteries fall short. By replacing the active material of the negative plate with a lead-carbon composite, it delivers significantly improved charge acceptance, reduced sulfation, and a longer service life — making it an ideal choice for off-grid, solar, marine, and RV energy storage systems.\u003c\/p\u003e\n\u003cp\u003eLead-carbon technology directly addresses the most common failure modes of flat plate VRLA batteries under heavy cycling. The carbon composite on the negative plate minimises sulfation during partial state-of-charge operation, while also enabling lower charge voltages that reduce corrosion on the positive plate and improve overall system efficiency.\u003c\/p\u003e\n\u003cp\u003eVictron's testing confirms a cycle life of at least 500 cycles at 100% depth of discharge, with performance extending to over 1,000 cycles at 60% DoD and more than 1,400 cycles at 40% DoD. This makes the Lead Carbon battery a robust and cost-effective solution for systems that experience frequent or deep discharge cycles.\u003c\/p\u003e\n\u003cp\u003eThe battery features M8 threaded insert terminals for secure and reliable connections, and its robust construction supports both float and cyclic service applications. Compatible with Victron chargers, inverter-chargers, and solar charge controllers, it integrates seamlessly into a wide range of Victron energy systems.\u003c\/p\u003e\n\u003cp\u003eBuilt to Victron's exacting standards and backed by their global support network, the Lead Carbon Battery 12V 160Ah offers a dependable and high-performance energy storage solution for demanding off-grid and mobile power applications.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eLead-Carbon Composite Negative Plate\u003c\/h4\u003e\n\u003cp\u003eThe negative plate active material is replaced with a lead-carbon composite, which reduces sulfation under partial state-of-charge conditions and significantly improves charge acceptance compared to standard VRLA lead-acid batteries.\u003c\/p\u003e\n\u003ch4\u003eExtended Cycle Life\u003c\/h4\u003e\n\u003cp\u003eVerified cycle performance of at least 500 cycles at 100% DoD, over 1,000 cycles at 60% DoD, and more than 1,400 cycles at 40% DoD — making this battery well suited for applications with frequent or deep discharge cycles.\u003c\/p\u003e\n\u003ch4\u003eLower Charge Voltage for Higher Efficiency\u003c\/h4\u003e\n\u003cp\u003eLead-carbon technology allows for reduced charge voltages, resulting in greater charging efficiency, lower heat generation, and reduced corrosion of the positive plate — all of which contribute to a longer service life.\u003c\/p\u003e\n\u003ch4\u003eImproved Partial State-of-Charge Performance\u003c\/h4\u003e\n\u003cp\u003eUnlike standard lead-acid batteries, the Lead Carbon battery can operate reliably in a partial state of charge without accelerated capacity loss — ideal for solar and off-grid applications where full recharge cycles are not always possible.\u003c\/p\u003e\n\u003ch4\u003eM8 Threaded Insert Terminals\u003c\/h4\u003e\n\u003cp\u003eEquipped with M8 threaded insert terminals, the battery provides a solid and corrosion-resistant connection point suitable for high-current applications and long-term reliability.\u003c\/p\u003e\n\u003ch4\u003eFloat and Cyclic Service Compatibility\u003c\/h4\u003e\n\u003cp\u003eSuitable for both float (standby) and cyclic service use, with recommended absorption voltages of 14.1-14.4V and float voltages of 13.5-13.8V, making it adaptable across a variety of installation types and charge profiles.\u003c\/p\u003e\n\u003ch4\u003eHigh Cold Cranking Amperage\u003c\/h4\u003e\n\u003cp\u003eWith a CCA rating of 600A at 0°F, the Lead Carbon 160Ah battery delivers strong starting and surge performance, adding versatility for applications requiring reliable high-current output.\u003c\/p\u003e\n\u003ch4\u003eWide System Compatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for seamless integration with Victron inverters, inverter-chargers, solar charge controllers, and battery monitors, the Lead Carbon battery fits naturally into new or existing Victron energy systems.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity (C20 to 10.8V)\u003c\/td\u003e\n\u003ctd\u003e160 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCycle Life\u003c\/td\u003e\n\u003ctd\u003e≥500 cycles @ 100% DoD \/ ≥1,000 cycles @ 60% DoD \/ ≥1,400 cycles @ 40% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorption Charge Voltage\u003c\/td\u003e\n\u003ctd\u003e14.1-14.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Voltage\u003c\/td\u003e\n\u003ctd\u003e13.5-13.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCold Cranking Amperage (CCA @ 0°F)\u003c\/td\u003e\n\u003ctd\u003e600A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8 threaded insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e55 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (l × w × h)\u003c\/td\u003e\n\u003ctd\u003e532 × 207 × 226 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Lead-carbon-battery-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47128041849081,"sku":"BDV22160","price":680.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BDV22160-1.webp?v=1778918505"},{"product_id":"victron-lifepo4-battery-12-8v-200ah-ng","title":"Victron LiFePO4 Battery 12,8V\/200Ah NG","description":"\u003cp\u003eThe Victron Energy LiFePO4 12.8V\/200Ah NG is a next-generation lithium iron phosphate battery delivering 2560Wh of nominal energy at 12.8V, designed for demanding off-grid, marine, RV, and professional energy storage applications. Supporting continuous discharge up to 200A (1C) and peak pulse discharge up to 400A (2C) for 10 seconds, it provides substantial capacity and high-current capability in a single battery — making it an effective standalone house battery or a scalable building block for larger 12V, 24V, and 48V systems.\u003c\/p\u003e\n\u003cp\u003eThe Lithium NG series represents a significant advancement over the Lithium Smart series, incorporating an integrated shunt that transmits real-time battery voltage, current, and temperature data directly to the Battery Management System. The BMS — a Lynx Smart BMS NG 500A or 1000A, purchased separately — uses this data to calculate state of charge, generate pre-alarms when any cell voltage falls below 3.0V, disconnect loads when any cell falls below 2.8V, and stop charging when any cell exceeds 3.6V or when temperature moves outside the safe operating range. Battery firmware is automatically updated by the BMS without any manual intervention.\u003c\/p\u003e\n\u003cp\u003eUp to 50 Lithium NG batteries can be connected per Lynx Smart BMS NG, and up to 5 BMS units can be paralleled — enabling energy storage banks of up to 192 kWh at 12V from a single coordinated system. Batteries can be connected in series, parallel, or series-parallel combinations to build 12V, 24V, or 48V systems. The BMS automatically detects system voltage and the number of batteries connected in any configuration, eliminating manual setup and reducing the risk of commissioning errors in complex multi-battery installations.\u003c\/p\u003e\n\u003cp\u003eMonitoring and control are managed through the VictronConnect app via Bluetooth built into the BMS, through a Victron GX communication device, or remotely via the VRM Online Portal. Cell voltages, battery current, temperatures, and state of charge are all visible in real time. The battery's IP65-rated enclosure provides full protection against dust and low-pressure water jets, and the battery can be mounted upright or on its side using the included mounting brackets or an optional strap — making it adaptable to a wide range of installation environments.\u003c\/p\u003e\n\u003cp\u003eWith a round-trip efficiency of 92%, a self-discharge rate of no more than 3% per month at 25°C, and a cycle life of 2500 cycles at 80% DoD and 5000 cycles at 50% DoD with less than 1% capacity loss per 100 cycles, the Victron LiFePO4 12.8V\/200Ah NG is engineered for long-term performance in professional energy systems. Certified to UL1973, UL9540A, and IEC62619 at the cell level, IEC62620 for performance, and automotive ECE R10-6.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eIntegrated Shunt for Accurate BMS Data\u003c\/h4\u003e\n\u003cp\u003eAn integrated shunt continuously measures and transmits battery voltage, current, and temperature to the Lynx Smart BMS NG, enabling accurate state of charge calculation, real-time cell monitoring, and precise alarm and protection triggering — without requiring a separate external battery monitor or current sensor in the system.\u003c\/p\u003e\n\u003ch4\u003eAutomatic BMS Configuration — Series, Parallel and Series\/Parallel\u003c\/h4\u003e\n\u003cp\u003eThe Lynx Smart BMS NG automatically detects the system voltage and the number of batteries connected in any series, parallel, or series-parallel combination. Up to 50 batteries can be managed per BMS, with up to 5 BMS units paralleled for system energy storage up to 192 kWh at 12V — with no manual configuration required.\u003c\/p\u003e\n\u003ch4\u003eHigh Continuous and Pulse Discharge Capability\u003c\/h4\u003e\n\u003cp\u003eThe 12.8V\/200Ah NG supports a maximum continuous discharge current of 200A (1C) and a peak pulse discharge of 400A (2C) for 10 seconds, enabling it to sustain heavy inverter loads and absorb large motor startup surges from bow thrusters, windlasses, and high-power inverters without voltage instability.\u003c\/p\u003e\n\u003ch4\u003eComprehensive BMS Cell Protection\u003c\/h4\u003e\n\u003cp\u003eThe Lynx Smart BMS NG generates a pre-alarm when any cell voltage falls below 3.0V, disconnects loads when any cell falls below 2.8V, and stops charging when any cell exceeds 3.6V or when temperature moves outside the safe range — providing full multi-layer protection for all cells in the battery and any batteries connected in parallel or series.\u003c\/p\u003e\n\u003ch4\u003eMonitoring via VictronConnect, GX Device and VRM Portal\u003c\/h4\u003e\n\u003cp\u003eBluetooth built into the Lynx Smart BMS NG enables real-time monitoring of cell voltages, battery current, temperature, and state of charge via the VictronConnect app. When connected to a Victron GX device with internet access, all data is also available on the VRM Online Portal for remote monitoring and alarm management from anywhere.\u003c\/p\u003e\n\u003ch4\u003eExceptional Cycle Life — Up to 5000 Cycles\u003c\/h4\u003e\n\u003cp\u003eLiFePO4 chemistry delivers 2500 cycles at 80% DoD, 3000 cycles at 70% DoD, and 5000 cycles at 50% DoD at 25°C, with capacity and energy loss of less than 1% per 100 cycles — providing dramatically longer service life than lead-acid or other lithium chemistries with minimal degradation over the battery's operational lifetime.\u003c\/p\u003e\n\u003ch4\u003eIP65-Rated with Flexible Mounting Options\u003c\/h4\u003e\n\u003cp\u003eThe IP65-rated enclosure provides full protection against dust ingress and low-pressure water jets, making the battery suitable for demanding marine, RV, and outdoor off-grid environments. Included mounting brackets and optional strap mounting allow installation upright or on the battery's side to suit a wide range of available spaces and panel layouts.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Firmware Updates via BMS\u003c\/h4\u003e\n\u003cp\u003eBattery firmware is automatically updated by the Lynx Smart BMS NG — either through the VictronConnect app or, when a GX device with internet access is present, via the VRM portal. No manual firmware management is required, and any additional batteries added to the system later are automatically updated to the current firmware version by the BMS.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e12.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Capacity \/ Energy\u003c\/td\u003e\n\u003ctd\u003e200Ah \/ 2560Wh @ 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Voltage\u003c\/td\u003e\n\u003ctd\u003e14.0-14.2V | Float: 13.5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Continuous Charge \/ Discharge Current\u003c\/td\u003e\n\u003ctd\u003e200A (1C) continuous | 400A (2C) pulse 10s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound-Trip Efficiency\u003c\/td\u003e\n\u003ctd\u003e92%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCycle Life @ 25°C\u003c\/td\u003e\n\u003ctd\u003e2500 cycles @ 80% DoD | 3000 @ 70% DoD | 5000 @ 50% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003eDischarge: -20 to +50°C | Charge: +5 to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e41.9 lb.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e9.25 × 13.43 × 6.30 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Lithium-NG-batteries-12,8V-25,6V-51,2V-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lithium_NG_battery_12,8_V\/173204-Lithium_NG_battery_manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47128043553017,"sku":"BDV30263","price":1483.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BDV30263-1.webp?v=1778866399"},{"product_id":"victron-orion-tr-12-12-18a-220w-isolated-dc-dc-converter","title":"Victron Orion-Tr 12\/12-18A (220W) Isolated DC-DC converter","description":"\u003cp\u003eThe Victron Orion DC-DC Converter is engineered for dependable power conversion in demanding automotive, marine, and industrial applications. Its integrated remote on\/off functionality allows convenient control without the need for a high-current switch in the main power wiring. This feature can be activated using a low-power switch or connected directly to an engine run\/stop circuit for seamless operation.\u003c\/p\u003e\n\u003cp\u003eDesigned for maximum reliability, all Orion converter models feature short-circuit protection and support parallel operation, allowing multiple units to be connected together to increase available output current. With no practical limit to the number of units that can be paralleled, the system can easily scale to meet growing power requirements.\u003c\/p\u003e\n\u003cp\u003eThe rugged housing provides IP43-rated protection when installed with the terminal connections facing downward, helping safeguard internal components from moisture and debris. Installation is quick and straightforward thanks to robust screw-terminal connections that require no specialized tools.\u003c\/p\u003e\n\u003cp\u003eFor added protection, 12V and 24V input models include an integrated input fuse, simplifying system design and enhancing safety. Whether used for battery charging, voltage conversion, or powering sensitive electronics, the Victron Orion delivers efficient, reliable performance backed by Victron Energy's reputation for quality and durability.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V to 12V Isolated DC-DC Converter\u003c\/strong\u003e – Provides galvanic isolation between input and output for safe and stable power delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18A Continuous Output (220W)\u003c\/strong\u003e – Delivers reliable power for charging batteries and running DC loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote On\/Off Control\u003c\/strong\u003e – Can be controlled via a low-power switch or engine run\/stop signal, eliminating the need for a high-current switch in wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel Operation Support\u003c\/strong\u003e – Multiple units can be connected in parallel to increase total output current as system demand grows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-Circuit Protection\u003c\/strong\u003e – Built-in protection helps safeguard both the converter and connected equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP43 Protection Rating\u003c\/strong\u003e – Offers protection against dust and water spray when installed with terminals facing downward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Terminal Connections\u003c\/strong\u003e – Simple installation with secure, tool-free wiring connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Input Fuse\u003c\/strong\u003e – Built-in fuse protection on 12V input models for added safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Efficiency Design\u003c\/strong\u003e – Minimizes energy loss and heat generation for reliable long-term operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine, Automotive \u0026amp; Industrial Use\u003c\/strong\u003e – Ideal for auxiliary battery charging and stable DC power distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ch3\u003eElectrical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ORI121222110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage Range:\u003c\/strong\u003e 8 – 17 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Output Voltage:\u003c\/strong\u003e 12.2 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Output Voltage:\u003c\/strong\u003e 10 – 15 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Output Current:\u003c\/strong\u003e 18 A (at 40°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak Output Current:\u003c\/strong\u003e 25 A (10 seconds)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Output Power:\u003c\/strong\u003e 220 W (at 40°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e ~87%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-load Input Current:\u003c\/strong\u003e \u0026lt; 80 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Off Current Consumption:\u003c\/strong\u003e \u0026lt; 200 µA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIsolation \u0026amp; Protection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanic Isolation:\u003c\/strong\u003e 200 V DC between input, output, and chassis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort Circuit Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver Temperature Protection:\u003c\/strong\u003e Yes (output current derates at high temperatures)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Fuse:\u003c\/strong\u003e Internal, non-replaceable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP43 (when installed correctly)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 130 × 186 × 70 mm (5.1 × 7.3 × 2.8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e ~1.3 kg (3.0 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Screw terminals (up to 16 mm² cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Chassis mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnvironmental Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -20°C to +55°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity:\u003c\/strong\u003e Max 95% non-condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Natural convection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance \u0026amp; Standards\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCE approved\u003c\/li\u003e\n\u003cli\u003eAutomotive EMC compliance (ECE R10)\u003c\/li\u003e\n\u003cli\u003eEN 60950 safety standard\u003c\/li\u003e\n\u003cli\u003eEN 61000-6-1 \/ EN 61000-6-3 EMC standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Orion-Tr-DC-DC-converters-isolated-100-250-400W-EN.pdf\"\u003eDatasheet \u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual-Orion-Tr-isolated-DC-DC-converters-EN-FR-NL-ES-IT-DE.pdf\"\u003eManual\u003c\/a\u003e\u003c\/h3\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47131409678585,"sku":"VCV70303","price":113.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-VCV70303-1.jpg?v=1781485177"},{"product_id":"victron-lifepo4-battery-12-8v-150ah-ng","title":"Victron LiFePO4 Battery 12,8V\/150Ah NG","description":"\u003cp\u003eThe Victron Energy LiFePO4 12.8V\/150Ah NG is a next-generation lithium iron phosphate battery delivering 1920Wh of nominal energy at 12.8V, designed for demanding off-grid, marine, RV, and professional energy storage applications. Supporting continuous discharge up to 150A (1C) and peak pulse discharge up to 300A (2C) for 10 seconds, it is well suited to both sustained heavy loads and high-current motor startup surges — making it an exceptionally capable mid-capacity building block for 12V, 24V, and 48V battery banks of any size.\u003c\/p\u003e\n\u003cp\u003eThe Lithium NG series represents a significant advancement over the Lithium Smart series, incorporating an integrated shunt that transmits real-time battery voltage, current, and temperature data directly to the Battery Management System. The BMS — a Lynx Smart BMS NG 500A or 1000A, purchased separately — uses this data to calculate state of charge, generate pre-alarms when any cell voltage falls below 3.0V, disconnect loads when any cell falls below 2.8V, and stop charging when any cell exceeds 3.6V or when temperature moves outside the safe operating range. Battery firmware is automatically updated by the BMS without any manual intervention.\u003c\/p\u003e\n\u003cp\u003eUp to 50 Lithium NG batteries can be connected per Lynx Smart BMS NG, and up to 5 BMS units can be paralleled — enabling energy storage banks of up to 192 kWh at 12V from a single coordinated system. Batteries can be connected in series, parallel, or series-parallel combinations to build 12V, 24V, or 48V systems. The BMS automatically detects system voltage and the number of batteries connected in any configuration, eliminating manual setup and reducing the risk of commissioning errors in complex multi-battery installations.\u003c\/p\u003e\n\u003cp\u003eMonitoring and control are managed through the VictronConnect app via Bluetooth built into the BMS, through a Victron GX communication device, or remotely via the VRM Online Portal. Cell voltages, battery current, temperatures, and state of charge are all visible in real time. The battery's IP65-rated enclosure provides full protection against dust and low-pressure water jets, and the battery can be mounted upright or on its side using the included mounting brackets or an optional strap — making it adaptable to a wide range of installation environments.\u003c\/p\u003e\n\u003cp\u003eWith a round-trip efficiency of 92%, a self-discharge rate of no more than 3% per month at 25°C, and a cycle life of 2500 cycles at 80% DoD and 5000 cycles at 50% DoD with less than 1% capacity loss per 100 cycles, the Victron LiFePO4 12.8V\/150Ah NG is engineered for long-term performance in professional energy systems. Certified to UL1973, UL9540A, and IEC62619 at the cell level, IEC62620 for performance, and automotive ECE R10-6.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eIntegrated Shunt for Accurate BMS Data\u003c\/h4\u003e\n\u003cp\u003eAn integrated shunt continuously measures and transmits battery voltage, current, and temperature to the Lynx Smart BMS NG, enabling accurate state of charge calculation, real-time cell monitoring, and precise alarm and protection triggering — without requiring a separate external battery monitor or current sensor in the system.\u003c\/p\u003e\n\u003ch4\u003eAutomatic BMS Configuration — Series, Parallel and Series\/Parallel\u003c\/h4\u003e\n\u003cp\u003eThe Lynx Smart BMS NG automatically detects the system voltage and the number of batteries connected in any series, parallel, or series-parallel combination. Up to 50 batteries can be managed per BMS, with up to 5 BMS units paralleled for system energy storage up to 192 kWh at 12V — with no manual configuration required.\u003c\/p\u003e\n\u003ch4\u003eHigh Continuous and Pulse Discharge Capability\u003c\/h4\u003e\n\u003cp\u003eThe 12.8V\/150Ah NG supports a maximum continuous discharge current of 150A (1C) and a peak pulse discharge of 300A (2C) for 10 seconds, enabling it to sustain heavy inverter loads and absorb large motor startup surges from bow thrusters, windlasses, and high-power inverters without voltage instability.\u003c\/p\u003e\n\u003ch4\u003eComprehensive BMS Cell Protection\u003c\/h4\u003e\n\u003cp\u003eThe Lynx Smart BMS NG generates a pre-alarm when any cell voltage falls below 3.0V, disconnects loads when any cell falls below 2.8V, and stops charging when any cell exceeds 3.6V or when temperature moves outside the safe range — providing full multi-layer protection for all cells in the battery and any batteries connected in parallel or series.\u003c\/p\u003e\n\u003ch4\u003eMonitoring via VictronConnect, GX Device and VRM Portal\u003c\/h4\u003e\n\u003cp\u003eBluetooth built into the Lynx Smart BMS NG enables real-time monitoring of cell voltages, battery current, temperature, and state of charge via the VictronConnect app. When connected to a Victron GX device with internet access, all data is also available on the VRM Online Portal for remote monitoring and alarm management from anywhere.\u003c\/p\u003e\n\u003ch4\u003eExceptional Cycle Life — Up to 5000 Cycles\u003c\/h4\u003e\n\u003cp\u003eLiFePO4 chemistry delivers 2500 cycles at 80% DoD, 3000 cycles at 70% DoD, and 5000 cycles at 50% DoD at 25°C, with capacity and energy loss of less than 1% per 100 cycles — providing dramatically longer service life than lead-acid or other lithium chemistries with minimal degradation over the battery's operational lifetime.\u003c\/p\u003e\n\u003ch4\u003eIP65-Rated with Flexible Mounting Options\u003c\/h4\u003e\n\u003cp\u003eThe IP65-rated enclosure provides full protection against dust ingress and low-pressure water jets, making the battery suitable for demanding marine, RV, and outdoor off-grid environments. Included mounting brackets and optional strap mounting allow installation upright or on the battery's side to suit a wide range of available spaces and panel layouts.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Firmware Updates via BMS\u003c\/h4\u003e\n\u003cp\u003eBattery firmware is automatically updated by the Lynx Smart BMS NG — either through the VictronConnect app or, when a GX device with internet access is present, via the VRM portal. No manual firmware management is required, and any additional batteries added to the system later are automatically updated to the current firmware version by the BMS.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e12.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Capacity \/ Energy\u003c\/td\u003e\n\u003ctd\u003e150Ah \/ 1920Wh @ 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge Voltage\u003c\/td\u003e\n\u003ctd\u003e14.0 – 14.2V | Float: 13.5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Continuous Charge \/ Discharge Current\u003c\/td\u003e\n\u003ctd\u003e150A (1C) continuous | 300A (2C) pulse 10s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound-Trip Efficiency\u003c\/td\u003e\n\u003ctd\u003e92%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCycle Life @ 25°C\u003c\/td\u003e\n\u003ctd\u003e2500 cycles @ 80% DoD | 3000 @ 70% DoD | 5000 @ 50% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003eDischarge: -20 to +50°C | Charge: +5 to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e30.9 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e8.07 × 9.84 × 8.07 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-Lithium-NG-batteries-12,8V-25,6V-51,2V-EN-.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Lithium_NG_battery_12,8_V\/173204-Lithium_NG_battery_manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47131419771129,"sku":"BDV30245","price":1127.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-BDV30245-1.webp?v=1778829656"},{"product_id":"victron-orion-tr-24-12-30a-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/12-30A (360W) Isolated DC-DC Converter","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Orion DC-DC Converter is engineered to deliver reliable power conversion in demanding mobile, marine, industrial, and off-grid applications. Designed with convenience and safety in mind, it features a remote on\/off function that eliminates the need for a high-current switch in the input wiring. This allows the converter to be controlled using a low-power switch or integrated directly with an engine run\/stop signal, simplifying installation and reducing wiring complexity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eBuilt for dependable performance, every model is fully protected against short circuits, providing enhanced system safety and peace of mind. For applications requiring higher output capacity, multiple units can be connected in parallel. With no practical limit to the number of converters that can be paralleled, users can easily expand their power system to meet growing energy demands.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe converter is housed in a rugged enclosure rated to IP43 protection when installed with the screw terminals facing downward. This helps safeguard the unit against solid objects and water spray, making it suitable for a wide range of operating environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInstallation is straightforward thanks to robust screw-terminal connections that require no specialized tools. The accessible terminal design allows for quick wiring and secure electrical connections, reducing installation time and maintenance effort.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor added protection, 12V and 24V input models include an integrated input fuse, helping protect the system from electrical faults and simplifying overall circuit design. Combining flexibility, scalability, and reliable protection, the Orion DC-DC Converter is an ideal solution for professional and recreational power systems alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e*with galvanic isolation* (360w)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-MultiPlus-II-120V-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/MultiPlus-II_120V\/32424-MultiPlus-II___Quattro-II-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47131421573369,"sku":"VCV70230","price":201.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Produc-VCV70230-1.jpg?v=1781116421"},{"product_id":"victron-smartsolar-mppt-100-30-charge-controller","title":"Victron SmartSolar MPPT 100\/30 Solar Charge Controller 100V 30A","description":"\u003cp\u003eThe Victron Energy SmartSolar MPPT 100\/30 is a high-performance solar charge controller designed to efficiently harvest maximum energy from solar panels and safely charge 12V or 24V battery systems at up to 30 amps. With a maximum PV input voltage of 100V, it is well-suited for marine, RV, off-grid, and residential solar applications where reliability and intelligent charging are essential.\u003c\/p\u003e\n\u003cp\u003eEquipped with ultra-fast Maximum Power Point Tracking (MPPT) technology, the SmartSolar 100\/30 continuously locks onto the optimal power point of the solar array, delivering up to 30% more energy compared to PWM charge controllers and up to 10% more than slower MPPT controllers. Its advanced partial shading detection ensures maximum harvest even when panels are partially shaded, overcoming the limitations of conventional MPPT controllers.\u003c\/p\u003e\n\u003cp\u003eThe SmartSolar 100\/30 features built-in Bluetooth connectivity, enabling seamless pairing with the VictronConnect app on smartphones and tablets. Through the app, users can configure charging profiles, monitor real-time performance data, view 46-day historical trends, and update firmware wirelessly — all without additional hardware or dongles.\u003c\/p\u003e\n\u003cp\u003eFeaturing an outstanding conversion efficiency exceeding 98%, the SmartSolar 100\/30 operates without a cooling fan and delivers its full rated output current up to 40°C. The fully programmable multi-stage adaptive charge algorithm supports a wide range of battery chemistries, with eight pre-programmed presets selectable via a rotary switch, making it straightforward to configure for AGM, GEL, flooded lead-acid, and lithium battery types.\u003c\/p\u003e\n\u003cp\u003eBuilt with comprehensive electronic protection including over-temperature, PV reverse polarity, PV short circuit, and PV reverse current safeguards, the SmartSolar 100\/30 is engineered for long-term reliability in demanding environments. Its VE.Direct port enables wired integration with GX devices, MPPT Control displays, and other Victron system components for centralised monitoring and control.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/EVAvRs32TiE?si=iB7aHgG-B5-CdDhZ\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eUltra-Fast MPPT Technology\u003c\/h4\u003e\n\u003cp\u003eThe SmartSolar MPPT 100\/30 uses ultra-fast Maximum Power Point Tracking to continuously optimise solar energy harvest, improving output by up to 30% over PWM controllers and up to 10% over slower MPPT controllers, even in rapidly changing light conditions.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Bluetooth Connectivity\u003c\/h4\u003e\n\u003cp\u003eWith Bluetooth Smart built-in, no dongle is required. The controller pairs directly with the VictronConnect app on iOS and Android devices for wireless configuration, real-time monitoring, firmware updates, and historical data review.\u003c\/p\u003e\n\u003ch4\u003eAdvanced Partial Shading Detection\u003c\/h4\u003e\n\u003cp\u003eThe innovative BlueSolar algorithm identifies the true global Maximum Power Point on the power-voltage curve, ensuring maximum energy harvest even when partial shading creates multiple local power peaks that would mislead conventional MPPT controllers.\u003c\/p\u003e\n\u003ch4\u003eHigh Conversion Efficiency\u003c\/h4\u003e\n\u003cp\u003eWith a maximum efficiency exceeding 98% and no cooling fan required, the SmartSolar 100\/30 minimises energy loss and operates silently at full rated output current up to an ambient temperature of 40°C (104°F).\u003c\/p\u003e\n\u003ch4\u003eFlexible and Programmable Charge Algorithm\u003c\/h4\u003e\n\u003cp\u003eThe multi-stage adaptive charge algorithm is fully programmable via VictronConnect, with eight pre-programmed battery presets selectable using a rotary switch. It supports a wide range of battery types including AGM, GEL, flooded lead-acid, and lithium chemistries.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Battery Voltage Detection\u003c\/h4\u003e\n\u003cp\u003eThe SmartSolar MPPT 100\/30 automatically detects and adjusts to 12V or 24V battery systems, simplifying installation and eliminating the need for manual voltage configuration in most setups.\u003c\/p\u003e\n\u003ch4\u003eComprehensive Electronic Protection\u003c\/h4\u003e\n\u003cp\u003eBuilt-in safeguards include over-temperature protection with automatic power derating, PV reverse polarity protection, PV short circuit protection, PV reverse current protection, and a fully discharged battery recovery function capable of recharging batteries depleted to zero volts.\u003c\/p\u003e\n\u003ch4\u003eVE.Direct Data Communication\u003c\/h4\u003e\n\u003cp\u003eThe VE.Direct port enables wired integration with Victron GX devices, MPPT Control displays, and PC interfaces, supporting centralised system monitoring, VRM remote management, and advanced data logging of battery voltage, current, temperature, PV voltage, and PV current over 46 days.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Voltage\u003c\/td\u003e\n\u003ctd\u003e12 \/ 24V (Auto Select)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Charge Current\u003c\/td\u003e\n\u003ctd\u003e30A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum PV Open Circuit Voltage\u003c\/td\u003e\n\u003ctd\u003e100V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal PV Power (12V \/ 24V)\u003c\/td\u003e\n\u003ctd\u003e440W \/ 880W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum PV Short Circuit Current\u003c\/td\u003e\n\u003ctd\u003e35A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Efficiency\u003c\/td\u003e\n\u003ctd\u003e98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-30 to +60°C (full rated output up to 40°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e7.32\" × 5.12\" × 2.75\" (W × H × D), 2.9 Lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-SmartSolar-charge-controller-MPPT-100-30-\u0026amp;-100-50-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual_SmartSolar_MPPT_100-30__100-50\/29694-MPPT_solar_charger_manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47131577942265,"sku":"CCV20030","price":135.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-CCV20030-1.webp?v=1778668954"}],"url":"https:\/\/emarineinc.com\/collections\/new-ebay.oembed","provider":"eMarine","version":"1.0","type":"link"}