{"product_id":"vah110-digital-volts-amp-hours-three-banks","title":"VAH110 Digital Volts Amp hours three banks","description":"\u003cp\u003e\u003cstrong\u003eVAH110 Digital Volts Amp hours three banks monitor \u003c\/strong\u003eprovides accurate low cost   digital instrumentation for three banks of batteries between 9.5 and 33   Volts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe VAH-110 displays battery voltage for three banks and   charging or discharge current and tells you how much battery capacity   has been consumed and how much is remaining in your main house bank. It   keeps track of all current entering and leaving the battery and applies   the appropriate Peukert's and efficiency factors.\u003c\/p\u003e\n\u003cp\u003eYou can set Low and   High voltage alarms and Low Amp-Hours Remaining alarms. When activated,   the VAH-110 built-in 85 dB alarm will sound and the display will flash.   Five levels of backlighting can be selected and all set-up, calibration   constants and alarm values are saved to non-volatile memory. The VAH-110   comes complete with a calibrated 450 Amp shunt to measure current.\u003c\/p\u003e\n\u003cp\u003eAll constants and calibrations are pre-set during manufacture but you   may alter these settings to suit your particular needs. Calibrations can   be altered using the front-panel switches for: Battery voltage, battery   current, charge efficiency, Peukert's exponent, battery bank capacity   (in amp-hours), low and high voltage alarms and low amp hours remaining   alarm value. An auto-zero function is easily initiated from the front   panel to zero the ammeter.\u003c\/p\u003e\n\u003cp\u003eWith a press of the button you can display three different battery   voltages (9.5 to 33.0 VDC each), current being delivered to or draining   from the main house bank (-450 to +450 Amps), the number of amp-hours   remaining in the house bank (0 to 3000 Amp-Hours) or the percentage   charge remaining in the house bank (0 to 100%).\u003c\/p\u003e\n\u003cp\u003eHigh volts, Low volts and Low Amp-Hours Remaining alarms can be   independently set using the front panel switches and all alarms can be   turned ON\/OFF simultaneously with the press of a single key.\u003c\/p\u003e\n\u003cp\u003eThe VAH-110 draws only 0.035 amps and is designed to be left on   continuously. 5 levels of backlight (including OFF) can be selected from   the front panel and is saved to non-volatile memory.\u003c\/p\u003e\n\u003cp\u003eThe VAH-110 outputs Voltage, Amps and Amp-Hours Remaining on the   standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information   can be used to log performance, repeat the display information at a   remote location (see www.cruzpro.com\/rp30.html ) or for use with the   CruzPro SEAviz virtual instrumentation software running under Windows on   your computer (see www.cruzpro.com\/seaviz.html). If NMEA 0183 serial   data is not required, then the output terminal can be programmed as an   external alarm output pin.\u003c\/p\u003e\n\u003ch3\u003eVAH110 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage:  9.50 - 33.00 VDC  (Higher voltage versions available by special order) \u003c\/li\u003e\n\u003cli\u003eCurrent Drain:  0.035 amps nominal  Display:  Large 4 digit LCD, 5   levels of backlighting with external backlight on\/off control \u003c\/li\u003e\n\u003cli\u003eData:  Volts (for three batteries), Amps, Amp-Hours, percentage charge remaining for house bank \u003c\/li\u003e\n\u003cli\u003eRanges:  9.50 to 33.00 VDC, -450 to +450 Amps (in tenths below 20.0 amps, 0 to 3000 Amp-Hours, 0-100% charge remaining \u003c\/li\u003e\n\u003cli\u003eCustom OEM \tversions available to 60 VDC \u003c\/li\u003e\n\u003cli\u003eBattery Size:  100 to 3000 Amp-Hours, programmable \u003c\/li\u003e\n\u003cli\u003eData Output:  NMEA 0183 serial 4800 BAUD, $IIXDR,V; $IIXDR,A; $IIXDR,G  Programmable as an external alarm output \u003c\/li\u003e\n\u003cli\u003eAlarms:  Built-in 85 dB audible alarm. Settable high and low voltage alarms and low charge alarm. \u003c\/li\u003e\n\u003cli\u003eSize:  4.3\\\"  X 4.3\\\" deep (110mm x 110mm) \u003c\/li\u003e\n\u003cli\u003eMounting: 2-1\/8\\\" (55mm) round hole \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVAH110 Connection Diagram:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" style=\"display: block; margin-left: auto; margin-right: auto;\" title=\"VAH-110 Digital Battery Monitor\" src=\"https:\/\/docs.emarineinc.com\/images\/products\/monitors\/monitorimages\/vah110cn.jpg\" alt=\"VAH-110 Digital Battery Monitor\" width=\"450\" height=\"219\"\u003e\u003c\/p\u003e","brand":"CruzPro","offers":[{"title":"Default Title","offer_id":47122541609209,"sku":"MTS10500","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/vah110sm__16156.jpg?v=1766023807","url":"https:\/\/emarineinc.com\/products\/vah110-digital-volts-amp-hours-three-banks","provider":"eMarine","version":"1.0","type":"link"}