{"product_id":"victron-digital-multi-control-gx","title":"Victron Digital Multi Control 200\/200A GX","description":"\u003cp\u003eThe Victron Digital Multi Control 200\/200A GX (DMC) is a remote monitoring and control panel designed to work with all Victron MultiPlus and Quattro inverter\/charger systems - including stand-alone, parallel, and two or three-phase configurations. Connecting to the inverter\/charger via a standard RJ45 UTP cable, it provides a clean, professionally finished control interface for mounting in the helm, dashboard, or system control panel of any vessel, vehicle, or off-grid installation.\u003c\/p\u003e\n\u003cp\u003eThe primary function of the Digital Multi Control is to allow the AC input current limit - for both PowerControl (shore power management) and PowerAssist (battery supplement) - to be adjusted directly at the panel without accessing the inverter\/charger itself. The rotary control knob adjusts the AC input current limit in real time up to 200A, covering both AC input 1 (typically shore power) and AC input 2 (typically generator) on Quattro systems independently. The selected current limit is displayed on LEDs, and the inverter\/charger can be switched between On, Off, and Charger-Only modes using the mode switch.\u003c\/p\u003e\n\u003cp\u003eThe GX variant of the Digital Multi Control features a modern plastic faceplate with no visible mounting holes - using an included mounting frame that allows the panel to be fitted from either the front or back of the panel cut-out, giving a clean, professional finish without exposed fixing screws. A built-in ambient light sensor automatically reduces LED brightness in low-light conditions, preventing the panel from becoming an unwanted light source in darkened helm stations or sleeping quarters.\u003c\/p\u003e\n\u003cp\u003eAvailable in two RJ45 connector configurations - standard straight  and 90-degree right-angle - the panel suits both standard and space-constrained panel installations. Compatible with both VE.Bus and legacy pre-VE.Bus inverter\/charger systems (firmware 15xx, 17xx, and 18xx).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/8pR9utgkjSI?si=F1Uuu0W8Ed5rGnBw\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eRemote AC Input Current Limit Adjustment - Up to 200A\u003c\/h4\u003e\n\u003cp\u003eThe rotary control knob adjusts the AC input current limit for PowerControl and PowerAssist in real time - up to 200A - directly at the panel without requiring access to the inverter\/charger unit. The current limit can be set independently for both AC inputs on Quattro systems.\u003c\/p\u003e\n\u003ch4\u003eOn \/ Off \/ Charger-Only Mode Control\u003c\/h4\u003e\n\u003cp\u003eA mode switch enables the inverter\/charger to be switched between Inverter+Charger (On), Charger-Only, and Off modes from the remote panel - providing full operational control of the MultiPlus or Quattro without physical access to the unit.\u003c\/p\u003e\n\u003ch4\u003eCompatible with All Multi and Quattro Systems\u003c\/h4\u003e\n\u003cp\u003eWorks with all MultiPlus and Quattro inverter\/charger configurations - single unit, parallel, two-phase, and three-phase - and with both current VE.Bus and legacy pre-VE.Bus systems running firmware versions 15xx, 17xx, and 18xx. No additional configuration is required for VE.Bus systems - simply connect via RJ45 UTP cable.\u003c\/p\u003e\n\u003ch4\u003eGX Plastic Faceplate - No Visible Mounting Holes\u003c\/h4\u003e\n\u003cp\u003eThe modern plastic GX faceplate uses an included mounting frame to allow installation from either the front or back of the panel cut-out - concealing all fixing hardware for a clean, professional finish suitable for high-visibility installations on helm stations and dashboard panels.\u003c\/p\u003e\n\u003ch4\u003eAutomatic LED Brightness Reduction at Night\u003c\/h4\u003e\n\u003cp\u003eA built-in ambient light sensor automatically reduces LED brightness as ambient light drops - preventing the panel from becoming an unwanted light source in darkened helm stations, sleeping accommodation, or vehicle cabins during overnight operation.\u003c\/p\u003e\n\u003ch4\u003eAvailable with Straight and 90-Degree Right-Angle RJ45 Connectors\u003c\/h4\u003e\n\u003cp\u003eAvailable in two RJ45 connector configurations - straight  for standard installations, and 90-degree right-angle  for space-constrained panel installations where the cable must exit parallel to the panel surface - ensuring clean cable routing in any installation environment.\u003c\/p\u003e\n\u003ch4\u003eSimple RJ45 UTP Cable Connection - No Extra Setup\u003c\/h4\u003e\n\u003cp\u003eInstallation requires only a standard UTP patch cable with RJ45 connectors - connecting the panel to the inverter\/charger's VE.Bus port. In the vast majority of installations no further configuration is required, making the Digital Multi Control one of the simplest remote panels to commission.\u003c\/p\u003e\n\u003ch4\u003eECE R10-6 Automotive Certified\u003c\/h4\u003e\n\u003cp\u003eCertified to ECE R10-6 automotive electromagnetic compatibility standards — confirming suitability for installation in vehicles, motorhomes, and other road-going applications subject to automotive EMC requirements.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Systems\u003c\/td\u003e\n\u003ctd\u003eAll MultiPlus and Quattro (VE.Bus and pre-VE.Bus firmware 15xx \/ 17xx \/ 18xx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Current Setting Range\u003c\/td\u003e\n\u003ctd\u003eUp to 200A (both AC inputs on Quattro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Functions\u003c\/td\u003e\n\u003ctd\u003eAC input current limit (rotary knob) | On \/ Off \/ Charger-Only mode switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eUTP RJ45 cable (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFaceplate Material\u003c\/td\u003e\n\u003ctd\u003ePlastic (no visible mounting holes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFront or rear panel mount (mounting frame included) - 65 × 120 mm cut-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Behind Panel\u003c\/td\u003e\n\u003ctd\u003e≥ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic Night Dimming\u003c\/td\u003e\n\u003ctd\u003eYes - ambient light sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eECE R10-6 (automotive EMC) | Declaration of Conformity | ISO9001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg (0.4 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Digital_Multi_Control_GX\/153833-Digital_Multi_Control-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Dimensions-of-plastic-panel-for-DMC000200000R-Digital-Multi-Control-200-200A-GX-_v1.0.pdf\" target=\"_blank\"\u003ePanel Dimension Drawing\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47122631852281,"sku":"IVV50222","price":129.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-IVV50222-1.webp?v=1780422708","url":"https:\/\/emarineinc.com\/products\/victron-digital-multi-control-gx","provider":"eMarine","version":"1.0","type":"link"}