{"product_id":"victron-mppt-charge-controller-75-10","title":"Victron MPPT BlueSolar Charge Controllers 75\/10 (12\/24V-10A)","description":"\u003cp\u003eThe Victron SmartSolar MPPT 75\/10 is a compact and lightweight solar charge controller designed to efficiently harvest maximum energy from solar panels and charge 12V or 24V battery systems at up to 10 amps. With a maximum PV open circuit voltage of 75V and nominal PV power capacity up to 290W at 24V, it is ideally suited for small off-grid, marine, RV, camper-van, and DIY solar installations where space is limited and reliable battery management is essential.\u003c\/p\u003e\n\u003cp\u003ePowered by Victron's ultra-fast Maximum Power Point Tracking algorithm, the SmartSolar 75\/10 continuously identifies and locks onto the true global Maximum Power Point across the solar array's full power-voltage curve. Unlike conventional MPPT controllers that can settle on a local peak — particularly under partial shading — the SmartSolar algorithm continuously scans to ensure the highest possible energy yield at all times, delivering up to 30% more power than PWM controllers and up to 10% more than slower MPPT designs.\u003c\/p\u003e\n\u003cp\u003eA key differentiating feature of the 75\/10 is its built-in load output, which allows DC loads to be connected directly to the controller. The load output automatically disconnects when the battery reaches a pre-set low-voltage threshold, preventing over-discharge and protecting battery health. For situations where solar harvest is insufficient to fully recharge the battery each day, the intelligent BatteryLife algorithm progressively raises the disconnect voltage day by day until a near-full recharge is achieved, then maintains that discipline on an ongoing basis.\u003c\/p\u003e\n\u003cp\u003eBuilt-in Bluetooth Smart enables direct pairing with the VictronConnect app on iOS and Android devices — no dongle required. From the app, users can configure charge profiles, set load output behaviour, enable streetlight and day\/night timing functions, monitor real-time PV and battery data, review up to 46 days of historical trends, and update firmware wirelessly. The VE.Direct port provides wired integration with Victron GX devices, the VRM Online Portal, and PC-based monitoring tools for more complex system setups.\u003c\/p\u003e\n\u003cp\u003eWith a peak efficiency of 98%, no cooling fan, and full rated output up to 40°C, the SmartSolar 75\/10 delivers quiet, reliable performance in its compact enclosure. A fully discharged battery recovery function initiates charging from zero volts and reconnects to lithium batteries with an integrated BMS disconnect function. Certified to EN\/IEC 62109-1, UL 1741, and CSA C22.2 standards, it is built for long-term dependability in a wide range of real-world environments.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/EVAvRs32TiE?si=tp6lGk3b4Z7VQqh5\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ch4\u003eUltra-Fast MPPT with Advanced Partial Shading Detection\u003c\/h4\u003e\n\u003cp\u003eThe SmartSolar 75\/10 uses an ultra-fast MPPT algorithm that continuously scans the full power-voltage curve to lock onto the true global Maximum Power Point — not a local peak. This delivers up to 30% more energy than PWM controllers and up to 10% more than slower MPPT designs, even in rapidly changing or partially shaded conditions.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Load Output with Over-Discharge Protection\u003c\/h4\u003e\n\u003cp\u003eDC loads can be connected directly to the controller's built-in load output, which automatically disconnects when the battery reaches a configurable low-voltage threshold. This prevents over-discharge and protects battery health without the need for a separate load controller or relay — a particularly valuable feature in small standalone systems.\u003c\/p\u003e\n\u003ch4\u003eBatteryLife — Intelligent Battery Management\u003c\/h4\u003e\n\u003cp\u003eWhen solar harvest is insufficient to fully recharge the battery within a single day, the BatteryLife algorithm progressively raises the load disconnect voltage day by day until a near-complete recharge is achieved. Once successful, it maintains a near-full recharge cycle approximately once per week, significantly extending battery service life in systems with limited solar input.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Bluetooth Smart\u003c\/h4\u003e\n\u003cp\u003eWith Bluetooth Smart built-in, no dongle is required. The controller pairs directly with the VictronConnect app for real-time monitoring, wireless configuration of charge profiles and load output settings, 46-day historical trend data, streetlight and day\/night timing functions, and firmware updates on any iOS or Android device.\u003c\/p\u003e\n\u003ch4\u003eAutomatic Battery Voltage Detection\u003c\/h4\u003e\n\u003cp\u003eThe SmartSolar 75\/10 automatically detects and selects 12V or 24V battery systems on first power-up, eliminating the need for manual voltage configuration and reducing the risk of installation errors in standard setups.\u003c\/p\u003e\n\u003ch4\u003e98% Peak Efficiency — No Cooling Fan\u003c\/h4\u003e\n\u003cp\u003eAchieving 98% peak conversion efficiency with fully fanless operation, the SmartSolar 75\/10 runs silently and delivers its full rated 10A output at ambient temperatures up to 40°C, with automatic power derating above that threshold to protect the unit and connected battery.\u003c\/p\u003e\n\u003ch4\u003eFully Discharged Battery Recovery\u003c\/h4\u003e\n\u003cp\u003eThe SmartSolar 75\/10 will initiate charging even when a battery has been fully discharged to zero volts, and will reconnect to a depleted lithium battery with an integrated BMS disconnect function — ensuring recovery of deeply discharged battery systems that most other controllers would leave unattended.\u003c\/p\u003e\n\u003ch4\u003eVE.Direct Wired Communication\u003c\/h4\u003e\n\u003cp\u003eThe VE.Direct port provides wired integration with Victron GX devices, the VRM Online Portal, and PC monitoring tools, enabling centralised system monitoring, remote management, and detailed data logging of battery voltage, current, temperature, load output current, PV voltage, and PV current over 46 days.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Voltage\u003c\/td\u003e\n\u003ctd\u003e12 \/ 24V Auto Select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Battery Current\u003c\/td\u003e\n\u003ctd\u003e10A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum PV Open Circuit Voltage\u003c\/td\u003e\n\u003ctd\u003e75V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal PV Power (12V \/ 24V)\u003c\/td\u003e\n\u003ctd\u003e145W \/ 290W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum PV Short Circuit Current\u003c\/td\u003e\n\u003ctd\u003e13A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Output\u003c\/td\u003e\n\u003ctd\u003eYes — 15A max, short-circuit proof, with BatteryLife algorithm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Efficiency\u003c\/td\u003e\n\u003ctd\u003e98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-30 to +60°C (full rated output up to 40°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (h x w x d)\u003c\/td\u003e\n\u003ctd\u003e100 x 113 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDatasheets and Manuals\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-SmartSolar-charge-controller-MPPT-75-10,-75-15,-100-15,-100-20_48V-EN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Manual_SmartSolar_MPPT_75-10_up_to_100-20\/29694-MPPT_solar_charger_manual-pdf-en.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"BlueSolar 75\/10","offer_id":47119785230585,"sku":"CCV20010-D","price":47.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8538\/1625\/files\/Product-CCV20010-4.webp?v=1778750570","url":"https:\/\/emarineinc.com\/products\/victron-mppt-charge-controller-75-10","provider":"eMarine","version":"1.0","type":"link"}