Air 30 Small Wind Turbine Land 24V is Primus Windpower land version wind turbine with optimized software and lightweight design that is simple and easy-to-install.
AIR 30 Micro Wind Turbine can be used for SCADA, telecom, security, cathodic protection but is not for use in marine environments.
If you are interested in boosting the Air 30 Land Wind Turbine performance, then you need to select the Blue Blades option from the radio buttons above.
The Blue Blades are hand laid carbon fiber blades that are balanced into a set providing maximum energy harvest from the wind while operating with minimum vibration and very low noise.
Air 30 24V Land Turbine Specifications:
| Energy |
Approx. 30 kWh/mo at 5.8 m/s (13 mph) |
| Swept Area |
1.07 m2 (11.5 ft2) |
| Rotor Diameter |
1.17 m (46 in) |
| Weight |
5.9 kg (13 lb) |
| Shipping Dimensions |
686 x 318 x 229 mm (27 x 12.5 x 9 in) 7.7 kg (17 lb) |
| Startup Wind Speed |
3.58 m/s (8 mph) |
| Voltage |
12, 24 VDC |
| Turbine Controller |
Mircoprocessor-based smart controller |
| Body |
Permanent mold cast aluminum |
| Blades |
(3) Injection-molded composite |
| Alternator |
Permanent magnet brushless |
| Overspeed Protection |
Electronic torque control |
| Survival Wind Speed |
49.2 m/s (110 mph) |
| Mount |
1.5 in schedule 40 pipe 48 mm (1.9 in) outer diameter |
| Wind Speed Operating Range |
3.6-22 m/s (8-49 mph) |
| Optimum Wind Speed Range |
11-15 m/s (25-32 mph) |
|
|
Air 30 24V Turbine Certifications:
- Restrictive of Hazardous Substances (RoHS) Compliancepoint
- Canadian Standards Association (CSA) International Certificate of Compliancepoint
- CE Declaration of Comformity (for battery charging applications only)
| AIR 30 High Wind Generators Parts |
| AIR 30 Parts Full selection of AIR 30 Wind Turbine Parts |