• 50A AC continuous rating
  • Use on any shore power connection up to 50A
  • Only one (1) required for dual 30A connections
  • Will work on foreign hook-ups with ground wire
  • Waterproof, can operate underwater
  • No heat produced under normal use
  • Two (2) 18” 10-Gauge marine grade leads included
  • Non-metallic housing with mounting tabs
  • Ignition protected for use in explosive atmospheres, Suitable for operation up to 122°F or 50°C
  • Mounting and connection hardware included
  • One (1) year factory-direct limited warranty
Retail: $264.71
Price: $255.00
SKU: GIY12110
Brand: Hypertech
You Save: $9.71 (3.7%)

    Quantity:
    Hypertech Galvanic Isolator Plus Hookup Diagram

    The Hypertech Galvanic Isolator Plus for Aluminum Boats for metal boats or aggressive locations provides approximately 2.5-Volts isolation in the ground lead of your shore power supply to isolate DC and AC electrolytic voltages coming from the dock but yet pass safety currents to ground in the event of a short circuit, wiring error, or power leakage from your boat.

    Aluminum hulls have a built-in electric potential of -0.75 to -1.0-Volts, depending on the alloy, temperature, salinity, and movement. Conventional Galvanic Isolators provide about 1 to 2-Volts of isolation, so protection is degraded by up to 80% to negative stray voltages when applied to aluminum hulls.

    • Works on 115- or 230-Volt supply, single or 2-phase
    • Fail-safe, meets ABYC standards (except 2.5V rating exceeds specifications)
    • Compact size: 8” x 3” x 1.5”
    Hypertech Galvanic Isolator Plus Information:
    ADOBE PDF Hypertech Galvanic Isolator Plus Manual
    LINK Hypertech Galvanic Isolator Plus Warranty