XW Power Distribution Panel (FGA: 865-1015)
The Xantrex XW Power Distribution Panel (FGA: 865-1015) includes a mounting plate and Xantrex XW Conduit Box. It is factory wired and labelled with everything to support a code-compliant single-inverter installation. It is designed to mount on the right side of the inverter/charger, but it can also be configured to mount on the left side. Internal wiring and breakers can be added to expand the Xantrex XW Power System with up to three inverters, four charge controllers, or other equipment to support 120/240-volt, 3-wire, single-phase systems.
The Xantrex XW Power Distribution Panel and Xantrex XW Conduit Box interface with:
• Xantrex XW4024 120/240 60, and Xantrex XW6048 120/240 60
• Xantrex XW Solar Charge Controllers (requires customer supplied breakers and wiring)
• Xantrex C-Series Charge Controllers (requires customer supplied breakers and wiring).
Internal wire barriers (or raceways) are included to keep communications wires separate from AC and DC power wires.
Xantrex XW Power Distribution Panel includes:
• Power Distribution Panel enclosure with a field-reversible panel door
• Mounting Plate
• Xantrex XW Conduit Box
Xantrex XW PDP Dimensions:
30" (761mm) H x 16" (406mm) W x 8 ¼" (210mm) D
Depth from the wall = 8 ¾" (223 mm)
The enclosure comes pre-wired with:
• 3x 60A, 120/240 Vac, 2-pole, Square-D, Type QOU, DIN-rail mounted AC breakers (pre-wired to connect to one Xantrex XW inverter)
• 1x GJ250A 160 Vdc, 3/8" stud DC breaker
• 2x Ground terminal bus bars
• 1x Neutral terminal bus bar
• 1x Negative bus bar
• 1 pair #4/0 AWG Battery Cables
The panel door can be mounted on the right or left side of the Xantrex XW Power Distribution Panel.
AC Knockout slots = 9 (for dual 60A Square D, type QOU breakers)*
DC Knockout slots = 8 small (for 60A DC breakers) and 3 large (for GJ breakers)
*AC Breakers cannot exceed 60A.