Rutland

The Rutland FM910-4 is a purpose designed land based wind generator. Wherever there is a site that is unattended, remote and exposed the FM910-4 can be relied on to deliver power quietly and efficiently. This makes it suitable for use on static caravans and other remote housing where grid connectivity is a problem.   Start up windspeed 5.6mph Generates @ 11.2 mph 22W Generates @ 24.6 mph  72W Generates @ 33.6 mph  138W Bladespan  35.8in (910mm) Turbine Radius  30.2in...

The Rutland FM910-3 is a purpose designed land based wind generator. Wherever there is a site that is unattended, remote and exposed the FM910-3 can be relied on to deliver power quietly and efficiently. This makes it suitable for use on static caravans and other remote housing where grid connectivity is a problem. Start up windspeed 5.8mph Generates @ 11.2 mph 22W Generates @ 24.6 mph 72W Generates @ 33.6 mph 138W Bladespan 35.8in (910mm) Turbine Radius 30.2in (768mm) Special Features Furling...

Temp Sensor for Rutland 1200 Wind Generator controller

Ever Found Flat Batteries Just When You Need Them to Start the Engine? The Rutland 504 Windcharger has been designed with the weekend yachtsman in mind. It's the ideal trickle charger and is particularly suited to vessels less that 25' in length with battery banks typically around 100Ah. While the boat is unattended the Rutland 504 will be replenishing your batteries using the free and abundant power in the wind so you return to fully charged batteries. During longer spells on board the...

Marlec is proud to announce their latest innovation in micro wind turbines, the Rutland 914i Windcharger which intelligently uses Maximum Power Point Tracking (MPPT) technology to optimise the generator operation to perfectly match the speed of the turbine thereby achieving a highly efficient and reliable power output. Purchase Options: Rutland 914i only includes: Rutland 914i 12 volt wind turbine only Rutland 914i w/HRDi Rutland 914i 12 volt wind turbineHRDi charge controller Rutland 914i w/...

The Rutland 1200 Wind Turbine & Hybrid MPPT Charge Controller is a 500 Watt rated (12 or 24VDC) with a powerful but quiet operation of the new Tri-namic Blade that brings together low wind speed start up with high wind speed power performance and almost silent running across all wind speeds. It is the ideal companion for generating energy on a boat, RV or off grid home. What we like about this wind generator is its three phase (three wire) output which allows for lower-cost long run...

The new Rutland 1200 Remote Digital Display is designed to be conveniently located on board, you can view the actual performance, operating condition and remotely shutdown. Thee Rutland Remote Digital Display offers a number of optional screens for continuous display: wind power generation, solar generation or the default screen where both these, battery voltages and charge status are displayed. Rutland Remote Digital Display Specs Push buttons simply scroll through the screen and access...

Marlec is proud to announce their latest innovation in micro wind turbines, the Rutland 914i Windcharger which intelligently uses Maximum Power Point Tracking (MPPT) technology to optimise the generator operation to perfectly match the speed of the turbine thereby achieving a highly efficient and reliable power output. Purchase Options: Rutland 914i only includes: Rutland 914i 24 volt wind turbine only Rutland 914i w/HRDi Rutland 914i 24 volt wind turbine HRDi charge controller Rutland 914i w/...

Rutland 914i Replacement Tail FinPart # 101-127/1

Rutland 1200 ControllerManufacturer Part # CA-07-01

Rutland 1200 Controller Interface programming dongle and software is used to modify battery charging configuration levels. The Controller Interface can only be used with 1200 charge controller serial number N01905001 or later. Allows for easy programming of different battery specifications including lithium ion types. Manufacturer Part # CA-07-04

Rutland 1200 Brush Kit.  Kit includes 2 housings that hold three brushes each. There are two housings in each wind generator, so the kit allows complete replacement of the wind generator brushes. Inspection and cleaning of commutator ring when changing brushes is highly recommended to assure full long life energy production. Manufacturer Part # SA-10/07

Rutland 914i Tail Mount CoverPart # 101-128

Rutland 914i MPPT Assembly Board - MPPT PCB – 914i Part Numbers: MPPT PCB - 12V: SA-98/44 MPPT PCB - 24V: SA-98/45This item is non-returnable/non-refundable.

HRSi Charge Regulator - incorporates the latest Pulse Width Modulation (PWM) technology to regulate charge of the battery. Combined wind charger and up to 160 watts of solar panel input for single battery bank charging. Two tri-color LED's indicate charge status and battery voltage.  includes a Stop/Run switch. Works on 12 or 24 V systems and can be used  with Rutland 503 or 913 wind generators. An Isolation Diode is to be used when connecting solar panels to this controller. We also...

HRDi WIND / SOLAR CHARGE CONTROLLER - The latest wind & solar charge controller development from Marlec, the HRDi evolves from and improves on the successful HRDX controller.  The contemporary design meets the needs of ever increasing power demands and features a user selectable digital display.  The controller incorporates Pulse Width Modulation (PWM) technology to regulate battery voltage preventing overcharge.Charge control and dual battery bank charging for use with Rutland...

HRDi WIND / SOLAR CHARGE CONTROLLER - The latest wind & solar charge controller development from Marlec, the HRDi evolves from and improves on the successful HRDX controller.  The contemporary design meets the needs of ever increasing power demands and features a user selectable digital display.  The controller incorporates Pulse Width Modulation (PWM) technology to regulate battery voltage preventing overcharge. Charge control and dual battery bank charging for use with Rutland...

Rutland 913 Mounting Kit

SS Mast Kit Rutland 504 Wind Generator. Sectional Mast includes two fit together pieces with associated hardware for ease of assembly. Solid stays are also provided with all hardware.

Rutland 504 wind generator SS mast.  Comes in two fit together pieces with associated hardware.  Does not include Stays.  See MKW20504A for complete mast kit which would include this mast and the stay kit.

Rutland 504 Ball Bearing

Rutland 504 Brush Set

Rutland Wind Generator Replacement Blade (each). Fits 913, 914i, FM910-3, FM 910-4 and 910-Mark 2.Installation screws not included. Related Items:Blade Fasteners for Rutland 913/914i Blades

Rutland 913 Replacement Nose Cone (each), Hardware not included.Related Items:Hardware for Rutland 913/914i Nose Cone