e Marine

Maxi Fuse 30AMP/ 32 VDC

Maxi Fuse 40AMP/ 32 VDC

Maxi Fuse 50AMP/ 32 VDC

Maxi Fuse 60AMP/ 32 VDC

Box of 5, 10A  Barrel 1 x 1-1/4\"

Box of 5, 20A  Barrel 1 x 1-1/4\"

Box of 5, 30A  Barrel 1 x 1-1/4\"

Optional 15' plug-in extension cord works with kits: MKS24040A (10W); MKS24041A (20W); MKS24042A (30W). Easy way to extend wiring to your solar panel.

15 Amp ATC Fuse

25 Amp ATC Fuse

30 Amp ATC Fuse

These are designed to fit a 1.5" schedule 40 pipe.  A 3/8" through hole in the center. It is made of anodized aluminum.  Bright dip anodized to a marine grad standard.

Kit includes: Two Curved Washer for 1 1/2" Pipe Two 1 3/8 x 4 Delrin Spacer Two 3/8-16 x 8" SS Threaded Rod Two 3/8-16 SS Cap Nut Two 3/8-16 SS Nylon Locknut Two 3/8 SS Flat Washer Two 3/8 Nylon Shoulder Bushing Two 3 1/2" Backup Plates

The MAXI fuse uses "Diffusion Phill Technology" to provide predictable time delay characteristics and low heat dissipation.Available in 30A, 40A, 50A, 60A, or 70ASpecifications Voltage Rating 32 VDC Interrupting Ratings 1000A @ 32 VDC Operating Temperature Range -40°C to +125°C (Sn= -40°C to +105°C) Terminals Ag plated zinc alloy ...

Used in Automotive and low-voltage control circuits to 32V, Operating Temperature Range -40°C to 100°C, 95% RH non-condensing. Case color indicates amperage rating.  Never replace  a fuse amperage  rating greater than the amperage size being replaced or it may cause physical or personal harm.Ratings:    P/N (amp)     Color codeATC-1           BlackATC-2       &n...

Box of 5, Barrel 1 x 1-1/4"10 Amp, 20 Amp, or 30 Amp.

CLASS “T” FUSES Offer extremely fast short circuit response making an ideal circuit protector for high amperage electronic components such as inverters. Extremely current-limiting design minimizes the damaging heating and magnetic effects caused by short-circuit currents.   FEATURES • 20,000 Ampere interrupt capacity • 160V DC Maximum • UL Rated for DC applications under UL 198L ...

35 Amp ATC Fuse

Fiberglass Teetop Solar Charging Kit Includes Solarland 160 Watt Panel is designed to work with a nominal 12 Volt battery system with either flooded or AGM type batteries. Fiberglass Teetop Solar Charging Kit 160W is available in two versions:--> Fiberglass Teetop Kit: Kit includes the 160W solar panel (with easy connect water resistant terminal box), four "Z" mounting brackets with hardware, 30' of 12-2 Marine grade wire, 6' of 10-2 Marine grade wire, 6 amp Charge Controller (regulates...

Fiberglass Teetop Solar Charging Kit Includes Solarland 200 Watt Panel is designed to work with a nominal 12 Volt battery system with either flooded or AGM type batteries. Fiberglass Teetop Solar Charging Kit 160W is available in two versions:--> Fiberglass Teetop Kit: Kit includes the 200W solar panel (with easy connect water resistant terminal box), four "Z" mounting brackets with hardware, 30' of 12-2 Marine grade wire, 6' of 10-2 Marine grade wire, 6 amp Charge Controller (regulates...

Hybrid kits are the best solution for renewable energy on board your vessel. The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions. The Rutland 1200 Wind Turbine is equipped with a powerful but quiet operation of the new Tri-namic Blade that brings together low wind speed start up with high wind speed power performance and almost silent running across all wind speeds. Kits are all-inclusive allowing...

1" Stainless Steel 90 Degree Tee

Typically used with equipment requiring tie in to a shunt such as the Blue Sky IPN Pro remote controller or other similar equipment. All wire is non-refundable and is subject to a one time handling charge of $1.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.