Solar Mounting Solutions

Specification The ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. Installation The brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

SpecificationThe ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. InstallationThe brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

Specification The ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. Installation The brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

SpecificationThe ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. InstallationThe brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

Gemini Side Mounts were developed to provide a range of connections for grab rails and attachments on dodgers and biminis. Sliding mounts provide a cleaner look at a lower cost. Split type mounts, since they can be placed anywhere on a frame, allow a broader range of applications.

Sold in sets of 4. Anodized aluminum Z shapped bracket with multiple hole for easy mount of solar panels.

Gemini Side Mounts were developed to provide a range of connections for grab rails and attachments on dodgers and biminis.   Sliding mounts provide a cleaner look at a lower cost.  Split type mounts, since they can be placed anywhere on a frame,  allow a broader range of applications.

Smaller Solar PV Modules    Universal "Z" Mount Brackets Attaches to any solar module frame, perfect for curved or irregular surfaces. Kit includes four (4) Anodized Aluminum Z brackets and four (4) stainless steel bolts.

GEMINI 1"  Stainless Steel Concaved Fork MountPart # GEMCON-1-F

GEMINI 1"  Stainless Steel Concaved Post Mount Part # GEMCON-1-P

The SLD Tech Side of Pole/Wall Mount Bracket SLB-0122 is designed to provide a secure fixed, flat or pole mount with a tilt angle range of 0 to 90 degrees. Made from high-quality materials, this mount is compatible with SLD Tech's range of ST Series panels. Manufacturer Part # SLB-0122

The SLD Tech Side of Pole/Wall Mount Bracket SLB-0112 is designed to provide a secure fixed, flat or pole mount with a tilt angle range of 0 to 90 degrees. Made from high-quality materials, this mount is compatible with SLD Tech's range of ST Series panels. Manufacturer Part # SLB-0112

1 inch Stainless Steel Take-Apart Jaw Slide

Uses 9/64 drill bit for #8 screw or fastener   Features: Swing-open design, drill on installed frames, on radiused corners, anywhere.  Large knurled brass thumbscrews for a sure grip. Tool steel drill bushing for lifetime use. Rugged cast bronze body will not mar tubing. Applications: Drill stainless tubing easily Install fasteners of all types Add padeyes for tensioning straps Replace set screws with secure fasteners ...

This is a handy must-have tool for anybody working with solar panels that utilize MC-4 type connectors. Dual fork allows for easy release of connectors once the connectors have been engaged while the opposite end is used to help tighten down connector bushings. Made of nonmetallic material which makes them very durable in a Marine or wet environment.  Sold in Pairs.

Stainless Steel U-bolt Perfect for clamping onto a 1" stainless steel Bimini or stanchion pipe on board your vessel. Features a 1/4-20 thread with 1" ID and comes with to stainless steel nuts. Overall length is 1.75". Sold individually.

Stainless Steel Cap Nut for use with  1/4-20 bolt thread

Adjustable Panel Support - used in our stanchion mounting kits to hold in place the solar panel once the pivot angle has been set. Also useful for other functions onboard a boat where temporary support is needed.  Length can be adjusted from 24" to 47"

Stainless Steel End Cap for 1" Tube (each).  Push in friction ears  hold-in-place.  No tools required.

316 Grade Stainless Steel Tube 1\" Tube, 8' in length.

1" rail clamps (sold as set of 2).  These are a great hardware product for mounting almost any item to a 1 inch stainless steel rail that might be on your boat. They clamp on using a slotted captive screw and secure to your item with three mounting holes (#8).   Rail Clamp Spacer is also available.  For more information click here.

• Quick mount clamps require no holes to be drilled in railings for installation• Clamps mount to the railings simply by tightening the wing nut• Fits any .75", 1" OR 1.25" railings• Quick release design allows items to be quickly and easily removed for storage• Use for all sorts of accessory installations, including glass racks, binocular holders, bottle holders, and other similar items• Two (2) per package Clamp dimensions are 4" x 1.5" x 1.5"   Rail Clamp Spacer is also...

Replacement option for Germini mounts