Air Breeze Marine Parts

Replacement Body for Air Marine.  Part # 3-CMBP-1000-02

Air Breeze and Air 40 Bolt Package for Mounting Blades includes- Allen Keys - Socket Head Screws- Nuts- Washers- Tef Gel(Used for Land & Marine)Part # 3-CMBP-1023-06

Air Breeze Cruisers Spare Part includes Nose Cone, Blades, and Bolt Pack.

Complete set of three blades for use on Air Breeze (Marine & Land) and Air 40. Bolt Package included. Black color and sold in set of 3. Part # 2-ARBR-101

Replacement Nose Cone for Air Breeze Marine/Next Generation Air Breeze,  (white color)   Part # 3-CMBP-2015-02

Stop/Run  Switch - (50 ADC) DC rated & Sealed

Stop/Run Switch (50A DC) Sealed w/Legend Plate, Transient Suppressor & Crimps for Hook Up

Stop/Run Switch Legend Plate

BEARING - SHIELDED  Replacement inside Axis bearing for Air X, Air Breeze, Air 30, Air 40, Silent Wind & Air 403 wind generators. (1) Sealed/Shield Bearing Only

Replacement Hub for Air Breeze Marine and Next Generation Air Breeze.  Part # 3-CMBP-2016-02

Control Board for Air Breeze 12V and Next Generation Air Breeze 12V.  Part # 2-ARCT-103-01 This item is non-returnable/non-refundable.

Control Board for Air Breeze 24V.  Part # 2-ARCT-103-02 This item is nonreturnable/nonrefundable. ** This item is non-returnable/non-refundable. **

Control Board for Air Breeze 48V.  Part # 2-ARCT-103-03 ** This item is non-returnable/non-refundable. **

Replacement YAW bearing for Air X, Air Breeze, Air 30, Air 40, Silent Wind & Air 403 wind generators.  (1) Yaw Bearing sealed Marine Manufacturer item # 3-CABR-1000

The bearing spacer is 2 mm thick that sits between the front and internal axis bearings on the Air series of wind generators and SilentWind turbine products.  Sold as individual items, but 2 are required to meet the wind turbines 4 mm thickness on all products. Please order 2 at a time for full bearing spacer replacement. Part Number: 3-CAOT-1227

Yaw Bearing Kit includes a replacement sealed  bearing; "o" ring replacement for face assembly, large and small snap rings, armature connection screws, tye wraps; tube of Tef-Gel and application swab.Part # 2-ARYW-100-02 enhanced featured

All-inclusive HEAVY DUTY bearing replacement kit for AIR wind generators (Air Breeze or Air-X). This bearing kit is designed for wind generators that are installed in high wind or continuous wind environments where normal bearing wear is unacceptable. The Kit includes all the necessary parts that need replacement including the very important “O” ring that allows for resealing of the nacelle from the environment. Removal of bearings can be difficult at time based on the age of the unit and its...

The spacer bearing is 2 mm thick that sits between the front and internal axis bearings on the Air when generators and SilentWind turbine products.  Sold as individual items, but to a required to meet the wind turbines 4 mm thickness on all products. Please order 2 at a time for full bearing spacer replacement. Part Number: CAOT-1005

Yaw Neoprene Pad sits between the yaw mounting clamp and mast to help provide vibration dampening.  Fits most wind generators that mount on to a 1.5" schedule 40 pipe (OD 1.9"). Neoprene Yaw Pad (2" X 6" X .13" Thick) for Air Breeze (Marine & Land), Air-X (Marine & Land), Air 40, and Air 30 Part # 3-CAOT-1022

Stator for- Air Breeze 12V- Air-X 24V- Air 30 24V  - Air 40 12V   Part # 3-CMBP-1019-02

AIR Breeze, AIR X, AIR SILENT X  Yaw Assembly.  Includes Complete Marine Yaw Shaft Assembly with 34" Wire Length.  Manufacturer Part # 2-ARYW-101-02

Stator for - Air Breeze 24V- Air X 48V- Air 30 48V- Air 40 24V  Part # 3-CMBP-1019-03

Stator for  Air Breeze or Air40 48V.  Part # 3-CMBP-1019-05

AIR Hub Rotor Jam Nut. Land and Marine; Includes 5/8-18 19-8 Stainless Steel Hub Rotor Jam Nut Part # 3-HDNT-912

AIR Brush Kit. Land and Marine; Includes Brushes and Springs (also Air Industrial Brush Kit) Part # 2-ARCT-100

Replacement O-ring that sits between the face and body of the wind generator.  Provide a watertight seal to the internal circuits and should be replaced whenever the body and face plate is opened up.   Part # 3-CAOT-1002

Marine Casting Face. (Air Breeze) Part # 3-CMBP-1003-02

Yaw Bearing Kit    Used with the Air 30, Air 40 land units, But will also retrofit older land Air X and Air breeze products.  Should not be used on any of the Marine models. Part # 2-ARYW-100-01.

AIR Storage Kit can be used with all Primus Wind Power wind generators (Air X, Silent Air X, Air Breeze, Air30, Air 40) when they are placed in storage or for upcoming storm prepping. AIR storage kit is used to protect wind generator from weather when placed in storage after original blade and hub have been removed. AIR Storage Kit includes: AIR Blade Hub AIR X Marine Nose cone Super Lube Multi-Purpose Synthetic Grease with Syncolon (clear) Hub Rotor Jam Nut (to secure hub)...