AIR X Wind Generator 24V

The AIR-X builds upon what made AIR the world's #1 selling small wind turbine with new technology previously found only in today's state-of-the-art mega-watt-class wind turbines.

The microprocessor based speed control results in increased performance, improved battery charging capability and the reduction of “flutter” noise from the machine. The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and then efficiently delivers the energy to the battery. It actually controls blade rotation speed thus eliminating the buzzing noise commonly found with the AIR 403 and 303 in high winds. A new series of carbon-reinforced blades with a modified pitch angle further increases power production.

Much Lower Noise: AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum output will resume.

Benefit: Quieter and neighbor friendly operation.

Improved battery charging:The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.

Benefit: Extended battery life, no overcharging.

Lower stress design: AIR-X limits power on the input side of the electronics by controlling the torque from the blades. The power no longer has to be dissipated by the electronics resulting in lower stress on the circuit, bearings and other materials. Furthermore, stress on wind turbines occurs primarily in high winds. Under these conditions, the electronic stall design reduces the speed to 600 rpm, thereby significantly reducing turbine and tower loading.

Benefit: Greater confidence in high wind conditions without manually operating the stop switch.

Features Carbon Fiber Composite Blades Aircraft quality aluminum alloy castings Exclusive Brush-less neodymium cubic curve alternator Sophisticated internal battery charge regulator Robust tower clamp and yaw assembly for stronger and more secure tower mounting Maintenance-free - Only two moving parts Full Marine Tower Kit available for easy boat mounting Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged Marine powder-coating and stainless steel fittings for corrosion protection in a marine environment High Wind Safe Mode - Automatically slows turbine in potentially damaging winds. Neighbor Friendly. Sailboats - Recreational/cursing boating Offshore beacons and remote monitoring equipment Oceanside homes & cabins Water pumping Battery charging Science & education projects

Specifications

e Marine strives to minimize the pain of installation. Installation involves not just the wind generator but the need for a mast, wiring, fusing and other critical but necessary items which may not easily be found and backup on board spare parts. We offer a variety of kits and auxiliary components for one-stop shopping on your wind generator project.