CruzPro

F60 CruzPro Digital Fuel Gauge Round Face with Alarm & Transfer Pump Control.CruzPro F60 Digital Fuel Gauge with Alarm is an excellent low-cost solution for monitoring and controlling fuel. It’s compact design combined with its multiple functions and programmable the makes it an excellent gauge for fuel monitoring and control. One of its enhanced features is the ability to turn on and off transfer pumps based on preset levels of your tank. Mountain the standard...

CruzPro CS60 Quad Clocked Switch can switch up to 4 amps per circuit (16 amps total) under control of an accurate digital clock. The CruzPro Round CS60 can be programmed to automatically switch each circuit ON and OFF up to 3 times per day per circuit or periodically switch each of the four circuits ON and OFF for different time periods. For example: You can program a circuit to turn ON at 7:00 PM and turn OFF at 2:00 AM or program one or more circuits to switch ON for 5 minutes every...

CruzPro ER 1 External Relay Switch can be connected to the "external alarm" output of many of the CruzPro instruments and used to switch high current loads with the normally open and normally closed relay contacts. The CruzPro ER-1 input resistance of the control line is 10,000 ohms minimum and a Control voltage of between +3.5 to +12 VDC can be used to switch the relay from OFF to ON. The external relay switch is powered by 12 or 24VDC and typically draws only 0.035 amps when the...

CruzPro VAF60 Digital AC Volts/Amps/Hz/kW Monitor provides accurate low cost digital instrumentation for AC volts, amps, frequency and kW. The VAF60 Monitor displays ac voltage from 90 to 300 VAC RMS, AC current from 0 to 150 amps, AC frequency from 40 to 70 Hz and computes volt-amps (kW) from 0.0 to 45.0 kW. The CruzPro VAF60 can be set to Low and High voltage alarms and Low and High frequency alarms. The VAF60 built-in 85 dB alarm is activated, it will sound and the display will flash. The...

CruzPro VAF110 4" Digital AC Volts / Amps / Frequency / kW Monitor provides accurate low cost digital instrumentation for AC volts, amps, frequency and kW. The VAF110 digital monitor displays ac voltage from 90 to 300 VAC RMS, AC current from 0 to 150 amps, AC frequency from 30 to 100 Hz and computes volt-amps (kW) from 0.0 to 45.0 kW. The CruzPro VAF110 can be set to Low and High voltage alarms, Low and High frequency alarms and a high kW alarm. The VAF110 built-in 85 dB alarm is...

CruzPro D110 Digital DSP Depth Sounder compact to 1000 Ft/ 300 meters with shallow and deep Alarms, anchor drag alarm, keel offset with NMEA 0183 output.  The D110 1000' DSP Depth Sounder uses Digital Signal Processing (DSP) to reliably display water depth from 1.2 foot (0.4 Metre) to 1000+ feet (365 Meters). Depth can be displayed in feet, meters or fathoms. Variable display damping is provided so the user can optimize response speed against display stability...

CruzPro D60 Digital Depth Gauge with Digital Signal Processing (DSP) to reliably display water depth from 1.2 foot (0.4 Metre) to 1000+ feet (365 Meters)  The D60 DSP also provides superior high speed rejection of false signals due to transducer slap (buffeting), surface turbulence, thermoclines, double bounce and is almost immune to other depth sounders and fishfinders operating near-by. Model# D-60R Round D-60S Square CruzPro D60 Specifications: Operating Voltage:  9.50 -...

CruzPro SLT110 Digital Speed Temperature Log makes accurate digital instrumentation available for boat speed, distance traveled, water temperature, elapsed time. The SLT-110 also provides a race timer that can be pre-set to two different (pre-programmable) values. The SLT110 deep sounder displays speed and average speed up to 50.0 Knots (58 M.P.H.) in tenths, very accurate water temperature in degrees F or C in tenths, trip log to 999.9 miles, permanent log to 9,999 miles and elapsed time...

CruzPro RP60 Remote Data Repeater is capable of displaying over 200 standard and proprietary NMEA 0183 sentences and can also can monitor up to 4 separate data channels and can be trained to learn new sentences. The RP60 Remote Data Repeater's compact design, only 2-1/2" diameter and mounts in a standard 2-1/8" round instrument hole Model# RP-60R Round RP-60S Square CruzPro RP60 Specifications: Operating Voltage:  9.5 - 33.0 VDC  Current Drain:  0.035 amps nominal...

CruzPro T65 Digital Temperature Display continuously monitors three separate sensors and displays temperature from -20 deg F (-29 deg C) to +140 deg F. (+60 deg C). The T-65 comes factory calibrated but can be user calibrated in the field for each individual sensor for spot-on accuracy. All set-up and calibration constants are saved to non-volatile memory. The T65 uses standard 10K NTC thermister temperature sensors (the type most often used in speed/temperature and depth/temperature...

CruzPro AM60 Digital Rudder Angle Indicator learns sender resistance, easy to calibrate, individual limit alarms for Port/Stbd. NMEA 0183 serial data output or External Alarm output. The AM-60 can be operated from a 9.5 to 33.0 VDC power supply. The AM60 will function with all standard rudder angle sensors and can be connected as either a master or slave Model# AM-60R Round AM-60S Square CruzPro AM60 Specifications: Operating Voltage:  9.5 - 33.0 VDC  Current...

CruzPro CT60 Digital LCD Clock Race Watch Timer is an intelligent 12/24 Clock, Watch/Countdown timers with 8 built in alarms. NMEA 0183 Data output. Auto time-set when GPS time data available. When the CT-60 digital clock is used as a watch timer, it is programmable with a time interval anywhere from 1 second to 99 minutes and 59 seconds. The CT60 Watch Timer has a large LCD display yet draws only 0.018 amps. 5 levels of backlight (including OFF) can be selected from the...

VTCT1 - Volt/Amps Xformer for VAF meter

The CruzPro CH55 displays the meters of loose chain in meters, feet or fathoms. It can display the battery voltage at the winch even while it is running. All calibrations are entered in the production phase, but can be modified according to your specific needs. All information is automatically saved in non-volatile memory. The CH55 absorbs only 0.017 amps and 5 levels of backlighting (including OFF) are selectable for correct viewing. 12/24 Vdc power supply. Technical features Power supply...

CruzPro EFS10 Automatic Bilge Pump Controller 12V with Probe & built in Alarms 12VDC, will keep track of how many times activated. The EFS-10 12V monitors the presence of water in the bilge of your boat and automatically turns on your pump if the electronic float switch detects water continuously for more than 15 seconds. Once turned on, the EFS10/12 pump will run for at least 15 seconds. The EFS10/12 Bilge Pump can also be manually activated from the front...

CruzPro EFS10 Automatic Bilge Pump Controller 24V with Probe & built in Alarms 24VDC. Keeps track of how many times activated. The EFS-10 24V monitors the presence of water in the bilge of your boat and automatically turns on your pump if the electronic float switch detects water continuously for more than 15 seconds. Once turned on, the EFS10/24 pump will run for at least 15 seconds. The EFS10/24 Bilge Pump can also be manually activated from the front panel. Model#...

CruzPro EFS20 Automatic Dual Bilge Pump Controller 12V with Probe & Alarm 12 VDC. Dual pumps for redundancy while keeping track of number of activations. The EFS-20 12V can run two pumps drawing a total of up to 20 amps continuously, and larger pumps for shorter periods of time. The internal thermal shutdown protects the EFS-20/12 from overheating when driving large pumps. Model# EFS-20/12 CruzPro EFS-20/12 Specifications: Operating Voltage:  9.5 to 18 VDC, 0.02 ampere...

CruzPro EFS20 Automatic Dual Bilge Pump Controller 24V with Probe & Alarm 24 VDC. Dual pumps for redundancy while tracking number of activations. The EFS-20 24V is powerful enough to drive some very large pumps but may overheat if required to do so for very long. If the EFS20/24 overheats, it will shut down and rapid flash the Pump 1 On/Off and/or Pump 2 On/Off LEDS to indicate the overheated condition. Model# EFS-20/24 CruzPro EFS-20/24 Specifications: Operating Voltage:  9.5 to...

CruzPro BWA20 Bilge Water Alarm is a reliable solid state stainless steel water sensor that monitors your bilge for the presence of water. The BWA-20 will run for 2 years on 9V alkaline battery and comes with a built-in 85 dB audible alarm. Model# BWA-20 CruzPro BWA-20 Specifications: Operating Voltage:  9 VDC battery. Built-in low battery voltage alarm.  Alarms:  Built-in 85 dB audible alarm. Can be connected to optional External 105 dB Loud Alarm (LA-20)...

CruzPro THT 1 Bronze Thru Hull Temperature Transducer with 30' cable - Marine temperature transducer with bronze thru-hull fitting with 30' cable for WTP-35/WTP-65, T35/T65 or MaxVu110. Model# THT-1 CruzPro VAF110 Digital Monitor Specifications: Operating Voltage:  9.5 - 33.0 VDC  Current Drain:  0.035 amps nominal Data:  Volts, Amps, Frequency, Killowatts (kW) Data Output:  NMEA 0183 serial data output at 4800 BAUD of: $IIXDR,I,aaaa,A...

CruzPro THST 1 Plastic Speed Thru Hull Transducer with 30' cable - Marine speed/temperature transducer with 30' cable for SLT-30/SLT-60. Model# THST-1 CruzPro VAF110 Digital Monitor Specifications: Operating Voltage:  9.5 - 33.0 VDC  Current Drain:  0.035 amps nominal Data:  Volts, Amps, Frequency, Killowatts (kW) Data Output:  NMEA 0183 serial data output at 4800 BAUD of: $IIXDR,I,aaaa,A,VAF30,*CS - AC Amps $IIXDR,F,bb.b,H,VAF30,*CS - AC...

CruzPro TMT 1 Plastic Transom Water Temp with 30' cable is designed to provide the highest performance for your boat in a high speed, high performance transom-mounted unit. The CruzPro TMT-1 can be use with WTP-35/WTP-65 or T35/T65 or MaxVu110 Model# TMT-1 CruzPro VAF110 Digital Monitor Specifications: Operating Voltage:  9.5 - 33.0 VDC  Current Drain:  0.035 amps nominal Data:  Volts, Amps, Frequency, Killowatts (kW) Data Output:  NMEA 0183 serial data...

CruzPro GD20B Gas Vapor Monitor detects gas vapors at 10%, 20% or 30% of the concentration required for an explosion (LEL or Lower Explosive Limit). The GD20 uses new technology to lower the power requirements for the sensor and the GD20 can be programmed to put itself to sleep for further power conservation. The GD-20 Gas Vapor Detector can be programmed to be active continuously or wake up every 5 minutes for a sniff. If the GD-20 senses a dangerous concentration of gas, it sounds the alarm,...

CruzPro GD55 Gas Vapor Monitor uses new technology to lower the power requirements for the sensor and draws only 0.12 amps at 12VDC. The GD-55 gas detector comes with one LPG/Petrol/Gasoline sensor with 5 meters (16 feet) of cable. Installation into a round 2.4" diameter (55mm) hole requires only a screwdriver. An instruction manual and all mounting hardware is provided Model# GD-55R Round GD-55S Square GD55 Marine Gas Detector Specifications: Operating Voltage:  10.5 - 16.0...