MidNite Solar

MidNite Solar Graphics Panel for MidNite Classics MPPT Charge Controller Dimension: 4.5"L x 3.75"W x 1"D Weight: 1 Lbs Manufacturer # MNGP

MidNite Solar Lite Panel for MidNite Classics Lite MPPT Charge Controller Dimension: 4.5"L x 3.75"W x 1"D Weight: 1 Lbs Manufacturer # MNLP

For those who wish to remove the real display panel and remotely locate it. The dummy display fills up the void left after removing the real display. Manufacturer # MNGP Dummy Dimension: 4.5"L x 3.75"W x 1"D Weight: 0.5 Lbs

Remote Temperature Sensor - for use with inverter or charge controller Manufacturer # MNBTS

10 inch cable used to connect the MNGP to the Classic/Classic Lite body. Manufacturer # MNNW10

3 foot cable for the MidNite network. Used to network MidNite products together Manufacturer # MNNWC3

Charge controller mounting bracket. Please indicate which side of the E-panel the bracket is to be mounted. These control brackes work with all Midnite E-Panels and Nottagutter. It fits OutBack, Xantrex and MidNite MPPT controllers. Comes with 6 mounting screws. Dimension: 8"L x 4"W x 1"D Weight: 2 Lbs   Manufacturer # MNCCB-L and MNCCB-R

The MidNite BRAT is simply the most versatile Solar Controller in its class. The BRAT is a finely-tuned solar PWM charge capable of providing up to 30 Amps of charging current, with class-leading lighting and load control features including one-of-a-kind Solar Clock. Rain-proof out of the box, and supporting dead-battery charging and low-voltage load disconnect.  The BRAT is perfect for outdoor, marine, RV, and unattended remote applications. Manufacturer Part # MNBRATPRODUCT FEATURES...

MNPV3 Combiner (Enclosure only.Breakers/fuse holders sold separately) This model will accept three 150VDC (MNEPV) breakers or two 600/1000VDC fuse holders. With modifications to the deadfront 3 dinrail fuse holders can be used. Includes a 60 amp plus bus bar, 6 position PV negative bus bar, and a 6 position ground bus bar. Punch out tabs on plastic deadfront make for a clean installation using circuit breakers. An included vsnap in adapter makes for a professional looking installation when...

MNPV6 Combiner  (Enclosure only. Breakers/fuse holders sold separately) This model will accept six 150VDC (MNEPV) breakers or four 600/1000VDC fuse holders.  Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses.Punch out tabs on plastic deadfront make for a clean installation using circuit breakers.An included vsnap in adapter makes for a professional looking installation when installing fuse...

MidNite Solar 150VDC din rail mount breaker (13mm wide). MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply.Branch circuit rated 489AMidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.Breakers ordered...

MNPV12 Combiner  (Enclosure only. Breakers/fuse holders sold separately) This Combiner can be configured in 3 ways: A single 10 string combiner for a transformer based inverter 10 positive fuses 2 separate 5 string combiners for 2 transformer based inverters 5 positive and 5 positive fuses A single 5 string transformer less combiner 5 positive and 5 negative fuses This model will accept 12  150VDC (MNEPV) breakers or ten 600/1000VDC fuse holders.  Includes 15 position PV...

KID Wind Hydro 12-48 VDC comes with the UL458 marine supplement, THE KID meets very strict vibration, environment, and thermal requirements. KID Wind Hydro comes standard with wall mounting bracket. Model number MNKID-B for the Black standard and MNKID-W for the White standard version. Standard versions can be cut into the wall for a flush mount assembly and also come with a surface mount wall adapter to mount on the wall. Comes Bundled with one of the 4 choices of clipper options, We offer...

General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution. Used all around the world. 3/4 & 1" knockouts each end. Accepts up to 4 Din mount breakers from 1 to 63 Amps. Features: Enclosure: gray powder coated aluminum 3/4" & 1" knockouts each end Din rail for up to four MNEPV (Midnite Solar) breakers Limit breaker quantity to two when using 6AWG wire Left hand breaker position knocked out standard More detailed information:...

The Big Baby aluminum enclosure is about twice as wide as the Baby Box, allowing for a ETL listed 4 position din rail box and provides more wiring room. It also includes a ground box lug and mounting provisions for our short insulated bus bar as well as a ground bus bar. Features: Environmental Rating - Type 1 (Indoor) Big Baby's DIN rail accepts up to 4 breakers (not included)Breakers: 1-63AMax Wire - breakers 6 AWGMax. AC Voltage - 277 VACMax. DC Voltage - 300 VDCWarranty - 5 yearsListed by...

115 VAC MidNite Solar Surge Protector Device MNSPD-115 is a Type 2 device, designed for indoor and outdoor applications. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. The MNSPD is designed to clamp a 115,000 amp surge! Blue LED’s provide visual indication of operation from a distance. Engineered for both AC and DC electric systems, it provides protection to service panels, load centers...

A Powerful MPPT charge controller on the market at a great price!!The Classic substantially increases the flexibility, features and range currently found on MPPT controllers at an incredible price. With all the Classics you receive reliability, functionality and an incredibly powerful MPPT charge controller!PRODUCT FEATURES Manual and Auto EQ Built in DC-GFP and Arc Fault Protection (Not available on Lites) Communicates with the Clipper and Whizbang Jr. Mymidnite.com: Online Status...

A Powerful MPPT charge controller on the market at a great price!!The Classic substantially increases the flexibility, features and range currently found on MPPT controllers at an incredible price. With all the Classics you receive reliability, functionality and an incredibly powerful MPPT charge controller!PRODUCT FEATURES Manual and Auto EQ Built in DC-GFP and Arc Fault Protection (Not available on Lites) Communicates with the Clipper and Whizbang Jr. Mymidnite.com: Online Status...

A Powerful MPPT charge controller on the market at a great price!! The Classic substantially increases the flexibility, features and range currently found on MPPT controllers at an incredible price.  With all the Classics you receive reliability, functionality and an incredibly powerful MPPT charge controller! PRODUCT FEATURES Manual and Auto EQ Built in DC-GFP and Arc Fault Protection (Not available on Lites) Communicates with the Clipper and Whizbang Jr. Mymidnite.com: Online Status...

300 VAC MidNite Solar Surge Protector Device MNSPD-300 is a Type 2 device, provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. The MNSPD is designed to clamp a 115,000 amp surge! Blue LED’s provide visual indication of operation from a distance.Protection is...

300 VDC MidNite Solar Surge Protector Device MNSPD-300-DC is a Type 2 device, provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.Recommended for use on your charge controllers and combiner boxes interfacing with solar DC circuits up to 300 VDC.Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. The MNSPD is...

600 VAC MidNite Solar Surge Protector Device MNSPD-600 is a Type 2 device, provides protection that is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. The MNSPD is designed to clamp a 115,000 amp surge! Blue LED’s provide visual indication of operation...

Touch Safe Fuse Holder for 10x38mm fuses (sold separately) 1000VDC 30 amp Din rail mountUse in the MNPV combiners for high voltage string inverters. NRTL listed to UL2579.

The Whiz Bang Jr is a current sense module that attaches to the standard 500mv / 500A Shunt. It wires into the MidNite Solar Classic and KID Charge Controllers to give Amperage readings from the shunt. This allows for EndAmps to function based on System amps or Classic amps. To use the Whizbang jr with any of the Classic Lites, you will either need the local app or an MNGP. This product is made in the USA and carries a 5-years warranty. More detailed information: Manual - MidNite Solar Whiz...