Schneider

The Conext™ MPPT 80 600 solar charge controller offers an industry-first set of integration features and top performance that allows for large PV array systems to be easily installed and connected to the battery bank at the lowest overall cost. Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV strings, smaller wiring and conduit, and by eliminating the need for PV combiner boxes and DC circuit...

Schneider MPPT 60 150 Solar Charge Controller The MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery. Benefits Easy to install: Configurable auxiliary output LCD screen with face plate buttons for configuration...

XW Power Distribution Panel (FGA: 865-1015)The Xantrex XW Power Distribution Panel (FGA: 865-1015) includes a mounting plate and Xantrex XW Conduit Box. It is factory wired and labelled with everything to support a code-compliant single-inverter installation. It is designed to mount on the right side of the inverter/charger, but it can also be configured to mount on the left side. Internal wiring and breakers can be added to expand the Xantrex XW Power System with up to three inverters, four...

XW Connection Kit for INV2 (FGA# 865-1020) The Xantrex XW Connection Kit for Inv2 (FGA # 865-1020) is the extension kit required for connecting a second or third Xantrex XW Inverter/Charger in the same system. Xantrex XW Connection Kit includes:• Xantrex XW Conduit Box with raceway barriers and cable strap connections points,• 3x 60 A, 120/240 Vac, 2-pole, Square-D, Type QOU, Din-Rail mountable, AC breakers (includes bypass plate)• #6 AWG AC wiring to connect the inverter to the AC breakers...

XW Conduit Box (FGA# 865-1025)A XW Conduit Box (FGA # 865-1025) is available to enclose the bottom of the Xantrex XW Inverter/Charger and protect the cabling. Use of the XW Conduit Box may be required depending on the local electrical code. Be sure to consult with the local electrical authority to ensure the installation iscode-compliant.The XW Conduit Box comes in two pieces and mounts directly to the bottom of the inverter/charger with keyhole slots and screws. It is secured to the inverter...

XW System Control (FGA# 865-1050)The XW System Control Panel features a graphical, backlit liquid crystal display that displays system configuration and diagnostic information for all devices connected to the network. When installed as a XW Power System accessory, the XW System Control Panel eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System.

XW Automatic Generator (FGA# 865-1060)The XW Automatic Generator Start can automatically activate a generator to provide a XW Series Inverter/Charger with power to recharge depleted batteries or assist with heavy loads. The XW Automatic Generator Start adds intelligence to power management and eliminates time spent monitoring batteries and inverter loads.The XW Automatic Generator Start is compatible with popular generators, and can be configured to start the generator in response to low...