Products 1-5 of 5
Show
Availability: Special Order
CruzPro
Item #: MTS10665 -
CruzPro BWA20 Bilge Water Alarm is a reliable solid state stainless steel water sensor that monitors your bilge for the presence of water.
The BWA-20 will run for 2 years on 9V alkaline battery and comes with a built-in 85 dB audible alarm.
Model# BWA-20
CruzPro BWA-20 Specifications:
Operating Voltage: 9 VDC battery. Built-in low battery voltage alarm. Alarms: Built-in 85 dB audible alarm. Can be connected to optional External 105 dB Loud Alarm (LA-20)...
Availability: Special Order
CruzPro
Item #: MTS10645 -
CruzPro EFS10 Automatic Bilge Pump Controller 12V with Probe & built in Alarms 12VDC, will keep track of how many times activated.
The EFS-10 12V monitors the presence of water in the bilge of your boat and automatically turns on your pump if the electronic float switch detects water continuously for more than 15 seconds. Once turned on, the EFS10/12 pump will run for at least 15 seconds.
The EFS10/12 Bilge Pump can also be manually activated from the front...
Availability: Special Order
CruzPro
Item #: MTS10650 -
CruzPro EFS10 Automatic Bilge Pump Controller 24V with Probe & built in Alarms 24VDC. Keeps track of how many times activated.
The EFS-10 24V monitors the presence of water in the bilge of your boat and automatically turns on your pump if the electronic float switch detects water continuously for more than 15 seconds. Once turned on, the EFS10/24 pump will run for at least 15 seconds.
The EFS10/24 Bilge Pump can also be manually activated from the front panel.
Model#...
Availability: Special Order
CruzPro
Item #: MTS10655 -
CruzPro EFS20 Automatic Dual Bilge Pump Controller 12V with Probe & Alarm 12 VDC. Dual pumps for redundancy while keeping track of number of activations.
The EFS-20 12V can run two pumps drawing a total of up to 20 amps continuously, and larger pumps for shorter periods of time.
The internal thermal shutdown protects the EFS-20/12 from overheating when driving large pumps.
Model# EFS-20/12
CruzPro EFS-20/12 Specifications:
Operating Voltage: 9.5 to 18 VDC, 0.02 ampere...
Availability: Special Order
CruzPro
Item #: MTS10660 -
CruzPro EFS20 Automatic Dual Bilge Pump Controller 24V with Probe & Alarm 24 VDC. Dual pumps for redundancy while tracking number of activations.
The EFS-20 24V is powerful enough to drive some very large pumps but may overheat if required to do so for very long.
If the EFS20/24 overheats, it will shut down and rapid flash the Pump 1 On/Off and/or Pump 2 On/Off LEDS to indicate the overheated condition.
Model# EFS-20/24
CruzPro EFS-20/24 Specifications:
Operating Voltage: 9.5 to...