Fuse Holders

Blue Sea 5005 ANL Fuse Block 35-300A Manufacturer Part # PN 5005 Specifications Maximum Voltage 32V DC Base Material Reinforced Polycarbonate Fuse Mounting Blocks    Tin-Plated Copper Maximum Cable Size 2/0 AWG Maximum Torque 110 in-lb (12.43 Nm) Terminal Stud Size 5/16-18 (M8) Weight 0.35lb (0.16 kg) ...

ANL Fuse Block 750A w CoverAccepts 5/16" (M8) ring terminalsSwing out fuse design allows replacement of the fuse without removing fastenersStainless steel studs provide resistance to corrosion and high torquing for excellent electrical contactUL 94-V0 base resists high heatInsert molded studs ensure secure fuse mountingInsulating cover satisfies ABYC/USCG requirementsCover breakouts allow wire access in any directionFuse sold separatelyManufacturer Part # ANLHDSpecifications Maximum...

Block has 8-32 screw terminals for all fuse outputs and 10-32 threaded studs for mains. Rated for 30 AMP maximum per circuit, 100 AMP Total for the block at 32 Volts. Independent Bus makes for easy connection for return ground. Clear insulating cover has recess for labels and protects condutive parts from accidental contact. Cover also holds 2 spare fuses.

Block has 8-32 screw terminals for all fuse outputs and 10-32 threaded studs for mains. Rated for 30 AMP maximum per circuit, 100 AMP Total for the block at 32 Volts. Independent Bus makes for easy connection for return ground. Clear insulating cover has recess for labels and protects condutive parts from accidental contact. Cover also holds 2 spare fuses.Features:• Clear insulating cover with label recess for small format Blue Sea Systems™ labels• Cover insulates all conductive parts,...

ATC Fuse Holder

CLASS-T FUSE BLOCK WITH COVERStainless Steel Stud are 3/8” Studs. Mounting holes accept 1/4" Screws. Fuse Block is rated for up to 160 Volts DC and 400 Amperes. Includes 2 #8 tap screws on each side (Fuse not included). FEATURES Clear insulating cover protects conductive components – satisfies ABYC/USCG requirements Large heat dissipating tin plated copper plates on each side 180 degree access with cover on for 14-4/0 AWG wire • UL94V0 black base resists high heat L 7.0” x W 2.0” x H 2.3”...

1/4\" x 1-1/4\" Barrel Fuse Holder w/ Spare fuse compartment, 15 Amp, water tight

Fuse Holder, 1/4\" x 1-1/4\" Barrel Fuse Holder w/ Spare fuse compartment, 30 Amp, water tight

Maxi Surface Mount 30-60 Amp MAXI Fuse Block Screw Termination Accepts 18 to 4 AWG Wire Accepts one MAXI fuse from 30 to 80A DC   Manufacturer Part # PN 5006

General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution. Used all around the world. 3/4 & 1" knockouts each end. Accepts up to 4 Din mount breakers from 1 to 63 Amps. Features: Enclosure: gray powder coated aluminum 3/4" & 1" knockouts each end Din rail for up to four MNEPV (Midnite Solar) breakers Limit breaker quantity to two when using 6AWG wire Left hand breaker position knocked out standard More detailed information:...

The Big Baby aluminum enclosure is about twice as wide as the Baby Box, allowing for a ETL listed 4 position din rail box and provides more wiring room. It also includes a ground box lug and mounting provisions for our short insulated bus bar as well as a ground bus bar. Features: Environmental Rating - Type 1 (Indoor) Big Baby's DIN rail accepts up to 4 breakers (not included)Breakers: 1-63AMax Wire - breakers 6 AWGMax. AC Voltage - 277 VACMax. DC Voltage - 300 VDCWarranty - 5 yearsListed by...

Touch Safe Fuse Holder for 10x38mm fuses (sold separately) 1000VDC 30 amp Din rail mountUse in the MNPV combiners for high voltage string inverters. NRTL listed to UL2579.