MPPT Charge Controller Accessories

Plastic Wall Mount Box for SB2512i, SB2512iX, and SB1524iX

10 inch cable used to connect the MNGP to the Classic/Classic Lite body. Manufacturer # MNNW10

3 foot cable for the MidNite network. Used to network MidNite products together Manufacturer # MNNWC3

Remote Temperature Sensor - for use with inverter or charge controller Manufacturer # MNBTS

Charge controller mounting bracket. Please indicate which side of the E-panel the bracket is to be mounted. These control brackes work with all Midnite E-Panels and Nottagutter. It fits OutBack, Xantrex and MidNite MPPT controllers. Comes with 6 mounting screws. Dimension: 8"L x 4"W x 1"D Weight: 2 Lbs   Manufacturer # MNCCB-L and MNCCB-R

For those who wish to remove the real display panel and remotely locate it. The dummy display fills up the void left after removing the real display. Manufacturer # MNGP Dummy Dimension: 4.5"L x 3.75"W x 1"D Weight: 0.5 Lbs

MidNite Solar Graphics Panel for MidNite Classics MPPT Charge Controller Dimension: 4.5"L x 3.75"W x 1"D Weight: 1 Lbs Manufacturer # MNGP

MidNite Solar Lite Panel for MidNite Classics Lite MPPT Charge Controller Dimension: 4.5"L x 3.75"W x 1"D Weight: 1 Lbs Manufacturer # MNLP

Morningstar’s MeterHub (HUB-1) allows multiple Mornings tar products to communicate over a Meterbus network to provide improved data m onitoring, additional capabilities and lower system cost.   • Enables multiple controllers to share a single TriStar meter and display both single controller data (TriStar #1, TriStar #2...) as well as aggregated data fo r the entire system.  • Enables multiple controllers to share a single Relay Driver and fully utilize all 4 channels of the...

Morningstar ProStar MPPT Wire Box The Morningstar ProStar MPPT wire box is an optional accessory. It is only compatible with the ProStar MPPT solar charge controllers. The wire box allows you to connect larger gauge wire to the charge controller. The ProStar MPPT controllers can accept up to #6 AWG without the wire box and up to #2 AWG with the wire box. It also provides electrical knock-outs for connecting conduit to route your wires. Some of the available controller accessories will also...

The OutBack Remote Temperature Sensor (RTS) is a necessary tool for proper battery charging.  All OutBack products with integrated battery charging have a temperature compensation system built-in which benefits from the installation of the RTS (included with inverter/ chargers). The RTS ensures an OutBack system knows the precise battery temperature so that batteries can be recharged safely and efficiently.  Systems with multiple OutBack products connected to one HUB4 or HUB10...

Compatible With: SunSaver Duo controller SunSaver MPPT controller SureSine inverter Model Numbers RM-1 Key Features and Benefits Provides Important Information Easy to Install Easy to Use Low Self-Consumption: Backlight off 6mA Backlight on 15mA Mount in the wall or on the wall Adjustable Settings ...

The RTS is recommended whenever the temperature of the battery varies more than 5°C (9°F) during the year. This option can be used with the following models:  ProStar, TriStar, Sunkeeper, SunSaver Duo and SunSaver MPPT.

TriStar controllers are technically advanced and professional solar battery chargers and load controllers.  This version of the display  is mounted on the controller locally and designed to work with the Morningstar TS or TS-MPPT 45 or 60 controllers. If a remote display is needed, see the TS-RM-2 /CCM345750. The TriStar meters can be added to the controller when it is first installed, or at anytime after the controller has been in service. The meter will display a great deal of...

Morningstar TriStar  solar charge controllers are technically advanced and professional solar battery chargers and load controllers. This optional  digital LCD meter is desiged to be mounted in a remote location  and works with the TS or TS-MPPT 45 or 60. This remote meter is provided with a mounting plate and 30m (98.4 ft) of cable. It is identical to the TS-M-2  local meter version except that the TS-RM-2 version can be mounted at some distance from the controller. The...

The Ekrano GX represents the next generation in the GX product family. With its complete range of connections and interfaces as well as its integrated 7-inch touchscreen display, it is the most powerful GX device to date and allows you toalways have perfect control over your system from wherever you are and to maximise its performance. Simply access your system via our Victron Remote Management (VRM) portal, or access it directly, using the built-in touchscreen, a Multi-Functional Display...

The GX Touch 70 is a display for our Cerbo GX. The 7″ touchscreen display give an instant overview of your system and allow to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, Their super slim waterproof design, top-mountable setup and simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Victron GX Touch 70 Information: Cerbo GX, Cerbo-S GX & GX Touch Specsheet ...

Designed for use with C Series Charge Controllers ( C35,C40 and C 60), digital meter mounts in the front of a charge controller, or as a remote, it can be installed up to 100’away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R50 comes with 50’ (15 m) for remote installation.  Xantrex P/N 33703

With the Color Control GX you can have full control & monitoring of Multi's, Inverters and Quattro's. It is easy to install and have real-time system status read-out at your finger tip. The Color Control (CCGX) provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Nultis, Quattros, all Victron's latest MPPT solar chargers, BMV-700, BMV-600, Lynx Ion + Shunt and more. The Color Control unit comes...

Allowes easy mounting of the MPPT Remote Display or Battery Monitor (BMV 700, 702) on a wall, instead of flush mounted in a panel. More detailed information: Manual for Victron MPPT Remote Display ...

Allowes easy mounting of the MPPT Remote Display or Battery Monitor (BMV 700, 702) on a wall, instead of flush mounted in a panel. More detailed information: Manual for Victron MPPT Remote Display ...

Victron Venus GX System Monitoring provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more. The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by...

Victron Octo GX System Monitoring is the communication-centre of your installation. It connects the components together and ensures they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via Victron's free-to-use Victron Remote Management Portal (VRM). The Octo GX is the best fit for installations that have many MPPT Solar Chargers, as it has 10 VE.Direct ports. Octo GX Information: Victron Octo GX Manual ...

Victron Cerbo GX System Monitoring ensures that all your energy installationsystem-components - such as inverter/chargers, solar chargers, and batteries work in harmony. Simply connect through the Victron Remote Management Portal (VRM), or access directly, using the separate GX Touch 50, a MFD or the VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in...

Victron Cerbo-S GX System Monitoring ensures that all your energy installationsystem-components - such as inverter/chargers, solar chargers, and batteries work in harmony. Simply connect through the Victron Remote Management Portal (VRM), or access directly, using the separate GX Touch 50, a MFD or the VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in...

Victron GX Touch 50 is the 5″ touchscreen display accessory for the Cerbo GX. It gives instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Victron GX Touch 50 Information: Cerbo GX, Cerbo-S GX & GX Touch Specsheet "Unboxing the new Cerbo GX &...

CCGX WiFi Module Simple can be used for the Victron Color Control GX Part Number: BPP900100200 Specifications Wireless StandardsIEEE 802.11n, IEEE 802.11g, IEEE 802.11bHost InterfaceUSB 2.0Frequency Band2.4GHz ISM BandData Security64/128-bit WEP WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AESOperating SystemWindows 2000, Windows XP, Windows Vista, Windows 7,Linux, and MAC OS X --> ...

The Universal Communication Module (UCM) provides a full featured communication bridge or gateway between Blue Sky Energy’s Integrated Power Net (IPN™) based charge controllers and external systems.Blue Sky Energy’s proprietary IPN Network allows multiple charge controllers to communicate with each other and coordinate their activities to charge the battery as a single coordinated charging machine. The IPN network also allows multiple charge controllers to share a battery temperature...

CCGX WiFi Module Long Range can be used for the Victron Color Control GXPart Number: BPP900200200 Specifications Wireless StandardsIEEE 802.11n, IEEE 802.11g, IEEE 802.11bHost InterfaceUSB 2.0Frequency Band2.4GHz ISM BandData Security64/128-bit WEP WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AESOperating SystemWindows 2000, Windows XP, Windows Vista, Windows 7,Linux, and MAC OS X --> ...

Victron Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life. Smart Battery Sense improves battery charging by measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery...

The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display. Manufacturer Part #:  SCC900650010 VE.Bus Smart Dongle Information: VE.Bus Smart Dongle Manual --> ...

The VE.Bus Smart dongle is two products in one: First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes. Secondly it can work as a Voltage- and Temperature-sense...

The IPN-Remote display provides basic monitoring for Blue Sky Energy�s IPN compatible charge controllers. The unit displays battery voltage, output current and charge control system status for up to 8 charge controllers on a single IPN network. A bright crisp low power LED display is used to provide excellent readability in any lighting. The Charge Status indicator displays present charge control system status, and shows relative battery state of charge. The versatile IPN-Remote shows battery...

The IPN-ProRemote combines full-featured charge solar controller monitoring station  into a single user friendly remote display. A bright crisp backlit LCD display with plain English language text and three simple front panel keys is extremely easy to use. The IPN-ProRemote also monitors and controls BlueSky Energy's IPN based charge controllers. It can monitor both the combined total and individual status of up to eight IPN charge controllers on a single IPN network. Depending on...

The ProTouch 3.5" Touchscreen Remote Display is a 3.5” flush-mounting touchscreen display compatible with any Blue Sky Energy charge controller with IPN network capability. It provides a user-friendly graphic interface for monitoring your solar system as well as five preset battery charge profiles (Lead Acid and Lithium LiFePO4) for your charge controller. ProTouch without Shunt: Flush Mounting 3.5″ touchscreen display, solar and battery monitoring with 5 preset profiles, RJ-11 cable...

Battery Temperature Sensor for: Solar Boost 2000E/2512/3024/6024 Battery Temperature Sensor.  Easy add on and install. Optimizes charging of battery for given temperatures always assuring the battery bank is not over or undercharged for a given temperature situation. Manufacturer Item # 930-0022-20

Heavy duty, compact, 500A/50mV Shunt. Can be used in conjunction with various ammeters, power energy meters, and battery monitoring systems.

The Whiz Bang Jr is a current sense module that attaches to the standard 500mv / 500A Shunt. It wires into the MidNite Solar Classic and KID Charge Controllers to give Amperage readings from the shunt. This allows for EndAmps to function based on System amps or Classic amps. To use the Whizbang jr with any of the Classic Lites, you will either need the local app or an MNGP. This product is made in the USA and carries a 5-years warranty. More detailed information: Manual - MidNite Solar Whiz...

Wall Mount Box for the following Charge Controller- Blue Sky Solar Boost 3000i MPPT Solar Charge Controller - Blue Sky SC30 / SC30-LVD2.75" (7cm) deep black color and powder coatedManufacturer Item # 720-0011-01

The MPPT Control lets you see the status as well as setup all BlueSolar MPPT Charge Controllers that have a VE.Direct communications port. The new MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment. To easily mount the MPPT Control on a wall, instead of flush mounted in a panel, use one of our wall mount enclosures. See the related products slider below. Features View live status...