Victron Accessories

The AC Current sensor is a simple external current sensor used to measure AC Current, Power (VA) and calculate energy of a PV Inverter connected to the AC input or output of a Multi or Quattro. These values can then be displayed and sent to the VRM-website by the Color Control. The two measurement wires can be connected to the AUX and/or temperature sense input of a Multi or Quattro. ...

The GX Touch 50 & 70 protection cover prevents damage from UV light during prolonged exposure to the sun.

The Lynx Class-T Power In connects and fuses up to two strings of Lithium batteries. It features a positive and negative busbar, and connections for two Class-T fuses as well as a connection to ground the DC system. The Class T-fuses, available in 225A, 250A, 350A and 400A, must be purchased separately. For installations using three or more strings of Lithium batteries, use multiple Lynx Class-T modules. As a core component of the Lynx Distribution system, the Lynx Class-T seamlessly...

The Victron Charger Control panel (also known as the Phoenix Charger Control panel) provides remote control and monitoring of the charge process with LED indication of the charger status. In addition, the remote panel also offers output current adjustment that can be used to limit the output current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. The panel can also be used to change the battery...

The Victron Energy RJ45 UTP Networks Cables are used for the connection of the Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and GX devices.

The Skylla-i Control allows you to alter the charge current and see the system status.Manual 

Use this cable to connect a Victron product with a VE.Can port to a NMEA 2000 network.

Global connectivity with 4G LTE-M LTE-M is the abbreviation for LTE Cat-M1 or Long Term Evolution (4G), category M1. This cellular technology is designed to connect Internet of Things devices to existing 4G towers while using low energy. LTE-M does support handovers and roaming so it is possible to use this device in a moving vehicle like a campervan. Check the list in our GlobalLink 520 manual to see if LTE-M is officially confirmed to be available in your area. Coverage is increasing every...

Outdoor LTE-M puck antenna.

Outdoor LTE-M wall-mount antenna.

The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built-in battery monitor accurately monitors the state of charge of your battery. Use a GX device (e.g. Cerbo GX) for reading out the information. Part of the modular Lynx distribution system.DATASHEET

A modular DC busbar, used to connect batteries to the Lynx DC distribution system.USER MANUAL

A modular DC busbar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system. USER MANUAL

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. Its main features are: Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switchBattery monitor, indicating state of charge percentage and more data.Pre-alarm signal: provide a warning...

The GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.

Victron Energy Temperature Sensor for BMV-702 Battery Monitor.Compatible only with BMV-702 Dual Bank Battery MonitorPart # ASS000100000

With the Color Control GX you can have full control & monitoring of Multi's, Inverters and Quattro's. It is easy to install and have real-time system status read-out at your finger tip. The Color Control (CCGX) provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Nultis, Quattros, all Victron's latest MPPT solar chargers, BMV-700, BMV-600, Lynx Ion + Shunt and more. The Color Control unit comes...

Allowes easy mounting of the MPPT Remote Display or Battery Monitor (BMV 700, 702) on a wall, instead of flush mounted in a panel. More detailed information: Manual for Victron MPPT Remote Display ...

Allowes easy mounting of the MPPT Remote Display or Battery Monitor (BMV 700, 702) on a wall, instead of flush mounted in a panel. More detailed information: Manual for Victron MPPT Remote Display ...

Victron Venus GX System Monitoring provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more. The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by...

Victron Octo GX System Monitoring is the communication-centre of your installation. It connects the components together and ensures they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via Victron's free-to-use Victron Remote Management Portal (VRM). The Octo GX is the best fit for installations that have many MPPT Solar Chargers, as it has 10 VE.Direct ports. Octo GX Information: Victron Octo GX Manual ...

Victron Cerbo GX System Monitoring ensures that all your energy installationsystem-components - such as inverter/chargers, solar chargers, and batteries work in harmony. Simply connect through the Victron Remote Management Portal (VRM), or access directly, using the separate GX Touch 50, a MFD or the VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in...

Victron Cerbo-S GX System Monitoring ensures that all your energy installationsystem-components - such as inverter/chargers, solar chargers, and batteries work in harmony. Simply connect through the Victron Remote Management Portal (VRM), or access directly, using the separate GX Touch 50, a MFD or the VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in...

Victron GX Touch 50 is the 5″ touchscreen display accessory for the Cerbo GX. It gives instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Victron GX Touch 50 Information: Cerbo GX, Cerbo-S GX & GX Touch Specsheet "Unboxing the new Cerbo GX &...

CCGX WiFi Module Simple can be used for the Victron Color Control GX Part Number: BPP900100200 Specifications Wireless StandardsIEEE 802.11n, IEEE 802.11g, IEEE 802.11bHost InterfaceUSB 2.0Frequency Band2.4GHz ISM BandData Security64/128-bit WEP WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AESOperating SystemWindows 2000, Windows XP, Windows Vista, Windows 7,Linux, and MAC OS X --> ...

CCGX WiFi Module Long Range can be used for the Victron Color Control GXPart Number: BPP900200200 Specifications Wireless StandardsIEEE 802.11n, IEEE 802.11g, IEEE 802.11bHost InterfaceUSB 2.0Frequency Band2.4GHz ISM BandData Security64/128-bit WEP WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AESOperating SystemWindows 2000, Windows XP, Windows Vista, Windows 7,Linux, and MAC OS X --> ...

VE.Direct Bluetooth Smart dongle Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers (except for the 150/70 and 150/85) using the VE.Direct communication port...

Victron Energy VE.Direct CableThe VE.Direct cables are used to connect BMW-70x and low power MPPTs to the Color Control GX. The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.

Phoenix Inverters are ready to communicate with a computer through its RS-485 data port. All you need to link to your PC in order to be able to set and read out all parameters, is the data link as shown. Moreover, all Victron Energy products equipped with an RS-485 data port, such as VE.Net, can easily be integrated in a computerized monitoring and control system.Only for models: 12/1200, 12/1600, 12/3000, 12/5000, 24/1200, 24/1600, 24/3000, 24/5000, 48/3000, 48/5000, 48/8000,...

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX. Get instant data from your solar charger or battery monitor! VictronConnect lets you get live status info and configure Victron products using a VE.Direct Bluetooth Smart dongle or a VE.Direct to USB interface. Download for Android and iOS 8.0 or later. ...

Victron Energy Interface MK3-USB can be used to connect the following products to a computer for configuration:MultiMultiGridMultiPlusQuattroInverter (only models with a VE.Bus communication port)ECOmultiEasySolarEasyPlus ...

Victron Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life. Smart Battery Sense improves battery charging by measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery...

The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display. Manufacturer Part #:  SCC900650010 VE.Bus Smart Dongle Information: VE.Bus Smart Dongle Manual --> ...

The VE.Bus Smart dongle is two products in one: First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes. Secondly it can work as a Voltage- and Temperature-sense...

Victron Digital Multi Control Remote is design both for Multiplus and Quattro Inverter Chargers. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore-side current for example. Fixed setting range (for both models): 200 Amps. The brightness of the LED's is automatically reduced during night time. Connecting cable not included for the VE.Buss interface. Recommend the use of these connecting cables (CLICK HERE). ...