The Silentwind charge controller HYBRID BOOST is a combined wind and solar charge controller with an inbuilt micro-controller. The HYBRID BOOST was especially developed for the Silentwind Generator and enables you to additionally install solar panels up to a wattage of 300 Watt peak or to a maximum current of 20A. If you are using the ‘Load’ outputs, the charge controller can be configured to automatically switch off those outputs before the batteries are too deeply discharged, or turn on a light when it gets dark and turn off again when the sun rises.
Major operating parameters can be seen on an LCD on the front panel or all parameters can be seen on a tablet or smartphone over the Bluetooth connection. You can also set all operating parameters using the App provided for all Android and iOS devices.
The Silentwind Generator generates 3 phase AC voltage. In the charge controller AC is converted to a DC voltage. There are different models: 12 / 24 or 48 depending on the system voltage of the wind generator. All types of batteries (Gel, AGM, flooded and sealed lead acid and also lithium) can be charged. The correct maximum charge voltage - depending on the type of battery - must be adjusted in the setup.
Technical Data
|
Hybrid-charge Controller Type
|
HYBRID BOOST
|
|
Battery System Voltage (automatically detected)
|
12 / 24 / 48 Volt
|
|
Max. Power Input from the Wind Generator
|
600 W
|
|
Max. Current Input from the Wind Generator
|
40A/ 30A / 15A
|
|
Max. Power Input from the Solar Panel
|
300 W
|
|
Max. Current Input from the Solar Panel
|
20A / 10A / 5A
|
|
Max. Open Circuit Voltage Input of the Solar Panel
|
50 Vdc
|
|
Max. Charging Current to Batteries
|
60 A
|
|
Max. Switch-off Current at LOAD-output (Load)
|
2 x 10 A
|
|
Dimensions (L x W x H)
|
8.66" x 5.91" x 3.23"
(220 x 150 x 82mm)
|
|
Weight
|
6.17 lbs (2.8 kg)
|
|
Suitable for (Battery type)
|
flooded, sealed, gel, or AGM
|
|
Warranty
|
24 months
|