Water Heaters

A marine water heater (calorifier) stores hot water on board and can heat it two ways: with an electric element on shore power or generator, and with engine coolant through a built-in heat exchanger while you motor. eMarine carries Isotemp water heaters by Isotherm, including the stainless steel Basic series in sizes 24 to 75, TCT dual and double heat-exchange versions, Slim and Square models for tight spaces, and SPA water heaters from 4 to 11 gallons, plus a 12/24V water pump and a 12V air heater.

How to choose a marine water heater

  • Capacity: size the tank to the number of people aboard and how many showers you take between heat-ups.
  • Shape and fit: Basic (cylindrical), Slim and Square models suit different lockers and engine rooms.
  • Heat sources: check the AC voltage (115V or 230V) and whether you want one or two engine heat-exchange coils.
  • Mounting: confirm vertical or horizontal mounting and the pipe connections.

Are Isotemp water heaters the same as Isotherm?

Yes. Isotemp is the water heater line made by Isotherm, the marine refrigeration brand. See the full Isotherm collection.

Can a boat water heater run on engine heat only?

Yes. Models with a heat exchanger heat water from engine coolant whenever the engine runs; the electric element is used on shore power or generator.

Can I use a 115V or 230V heater?

Several Isotemp models list both 115V and 230V versions. Check the voltage on each listing before you order.

Isotemp water heaters are made by Isotherm, whose marine fridges and freezers we also carry.


18 products

Marine water heater buying guide

A marine water heater is an insulated tank with two heat sources: an electric element for shore power or a generator, and a coil that carries hot engine coolant while you motor. The Isotemp heaters in this collection are made by Isotherm and come in four families: the cylindrical stainless Basic, the narrower stainless Slim, the box-shaped Square, and the SPA with a polypropylene casing.

Capacity

Isotemp model numbers are the tank volume in liters: a Slim 20 holds 20 liters (5.3 US gallons), a Basic 75 holds 75 liters (19.8 gallons). Size the tank to how many people shower between heat-ups. As a rough guide, heating 40 liters from 15 °C to 60 °C (59 °F to 140 °F) takes about 2.1 kWh, or close to 3 hours with the standard 750 W element, before heat losses.

Element voltage and power

  • Every model is offered with a 230 V or 115 V element. In the US you want 115 V unless the boat has 230 V shore power.
  • 750 W is standard. A 750 W element draws about 6.5 A at 115 V, which leaves room on a 30 A shore connection.
  • A 1200 W element (about 10.4 A at 115 V) is an option on the Slim 20 and 25, Basic 40, 50 and 75, and SPA 25, 40, 50 and 60.
  • 2000 W is available only in 230 V versions of the larger tanks.

Engine coils, pressure and installation

Standard tanks have one engine-coolant coil. Double-coil versions, sold here as TCT, add a second heat-exchange coil for a second heat source, such as another engine. Basic and Slim tanks are rated at 7 bar with a 7 bar (100 psi) safety valve that also serves as the winter drain; the Square is rated at 5 bar and the SPA at 6 bar. Water connections are 1/2 in, and the stainless tanks accept both NPT and BSP fittings. The stainless models have 360-degree adjustable feet, so they can also be mounted on a bulkhead. Most versions include a thermostatic mixing valve, which blends in cold water so very hot tank water does not reach the taps; check each listing, as some are sold without one.

ModelVolumeSize (mm)WeightRated pressure
Slim 1515 L (4.0 gal)540 x 295 dia.9 kg7 bar
Slim 2525 L (6.6 gal)785 x 295 dia.12 kg7 bar
Basic 2424 L (6.3 gal)490 x 395 dia.13 kg7 bar
Basic 40 (single or double coil)40 L (10.6 gal)660 x 395 dia.16 kg7 bar
Basic 75 (single or double coil)75 L (19.8 gal)1070 x 395 dia.25 kg7 bar
Square 1616 L (4.2 gal)400 x 180 x 57516 kg5 bar
SPA 1515 L (4.0 gal)312 x 322 dia.8 kg6 bar
SPA 4040 L (10.6 gal)392 x 392 dia.14 kg6 bar

Length includes the thermostatic mixing valve. Isotherm's current catalogue lists the Basic range as Inox.

Models in this collection

Questions

What size boat water heater do I need?

From 15 liters (4 gallons) to 75 liters (19.8 gallons) here. Size by the number of people showering between heat-ups and by the space you have: the Slim and Square 16 cover 15 to 25 liters, the SPA 15 to 40 liters, and the Basic 24 to 75 liters.

Can a marine water heater run on 115 V shore power?

Yes. All Isotemp models are available with a 115 V element, 750 W as standard and 1200 W on selected sizes.

What is the difference between the Isotemp Slim and Basic?

Both are stainless steel cylinders. The Slim is 295 mm in diameter and longer for its volume, for narrow spaces. The Basic is 395 mm in diameter and comes in larger sizes up to 75 liters.

Do yacht water heaters need an anode?

Isotherm fits a heating element with a sacrificial anode as standard on all models except the Square.

Need help choosing? Contact us with the space you have, your shore power voltage and how many engines you want to connect, and we will help you choose a model.