Marine Fuel Flow Meters & Fuel Consumption Gauges

Marine fuel flow meters tell you how much fuel the engine is burning right now, how much you have used since you filled up and, with that, how far you can still go. A conventional fuel flow meter for boat engines puts a flow sensor in the fuel supply line, and on a diesel a second sensor in the return line, and subtracts one from the other to get net consumption in gallons or liters per hour. Multiply by hours and you have fuel used; divide the fuel left by the burn rate and you have the time and range remaining at the current throttle setting.

CruzPro fuel gauges

CruzPro takes a different approach that avoids cutting into the fuel lines. The CruzPro FU60 Fuel Consumption Computer is a plug-in replacement for a standard analog fuel gauge and works with common senders from Centroid, VDO, Teleflex, Faria, GM, Stewart-Warner and others. From the sender it computes fuel remaining in gallons, liters or percent to a tenth, fuel used, and consumption rate in gallons or liters per hour, and it handles odd-shaped boat tanks. Low and high fuel alarms sound an 85 dB built-in buzzer. It is offered in round and square bezels; the FU60 single listing covers the same instrument.

The CruzPro F60 Digital Fuel Gauge with Alarm is the simpler level-only gauge. It shows tank level in liters, gallons or percent on a four-digit backlit LCD, runs on 9.5 to 33VDC at 0.018A, fits a standard 2-1/8 in hole, and has a programmable output that can drive an external alarm, send NMEA 0183 data or switch a transfer pump on and off at preset tank levels.

Which one

  • Want burn rate and fuel used without new plumbing: FU60
  • Want an accurate digital level gauge with alarms and pump control: F60
  • Already have NMEA instruments: both offer NMEA 0183 output

Ask eMarine which sender your tank uses before you order.


3 products