Solar Charge Controllers for Boats

A solar charge controller manages the current from your panels so batteries charge fully without overcharging. This collection includes Victron SmartSolar and BlueSolar MPPT controllers (from 75/10 up to 150/85 Tr VE.Can), Blue Sky Solar Boost MPPT controllers, Morningstar ProStar MPPT and TriStar MPPT, Genasun MPPT and boost controllers, MidNite Solar Brat and Kid, Schneider, Xantrex, AERL and SLD Tech controllers, plus wind turbine controllers, for 12V, 24V and 48V battery banks.

How to choose a solar charge controller

  • MPPT or PWM: MPPT harvests more energy, especially when panel voltage is well above battery voltage; PWM is simpler for small systems.
  • Voltage rating: the controller maximum PV input (for example 100V or 150V) must exceed the array open-circuit voltage in cold weather.
  • Current: size the output amps to array watts divided by battery voltage, with some margin.
  • Battery and monitoring: check lithium charge profiles, Bluetooth, VE.Direct or display options.

Do you have a 48 volt solar charge controller?

Yes. Many Victron SmartSolar MPPT models, Morningstar and MidNite controllers support 48V banks; check each listing for battery voltage and PV input limits.

Which Victron charge controller should I pick?

The first number is maximum PV voltage and the second is charge current, so a SmartSolar 100/30 accepts up to 100V and charges at 30A. Our charge controller guide explains sizing.

Can one controller handle wind and solar?

Some can. For combined systems, see solar and wind control panels.

If you are wiring two or more panel strings in parallel, a PV combiner box adds per-string protection before the controller.

Running two or more strings? Add a solar combiner box with a breaker per string ahead of the controller.


83 products

Solar charge controller buying guide: MPPT vs PWM

A solar charge controller regulates the energy going into your batteries. It protects them from overcharging and excessive discharge, which is what keeps a battery bank healthy for years.

Solar charge controller wired between solar panels and a battery bank

Size the controller to your panels

The controller must handle the rated current of all panels combined, at your array's operating voltage.

  • One 85 W panel rated at 5.02 A needs a controller that handles at least 5.02 A.
  • Two 85 W panels wired in parallel give 5.02 A + 5.02 A, so the controller must handle at least 10.04 A.

Features to decide on

  • Status display: a simple LED charging indicator, or a meter showing battery voltage and charge current.
  • Battery type settings for gel, AGM, flooded lead-acid or lithium.
  • Bluetooth monitoring from a phone.
  • Conformal coating for damp or salty environments.

MPPT charge controllers

Maximum Power Point Tracking (MPPT) controllers constantly find the panel's maximum power point and convert the higher panel voltage down to the voltage the battery needs. For example, a panel delivering 17 V can be converted to the 13 V needed to charge a 12 V battery, with a gain in charge current of up to about 25%. MPPT is the better choice for larger arrays, higher panel voltages and cold or partly shaded installations.

PWM charge controllers

PWM (series) controllers are a low-cost, reliable way to regulate solar charging on small systems. They work best when the panel voltage is about 20% above the battery's full charge voltage, as with a typical 36-cell panel on a 12 V battery.

Diversion load controllers

Diversion load controllers are used with solar panels, wind turbines and hydro generators. They watch battery voltage and, when the battery is full, send excess energy to a dump load, usually a resistor bank or a heating element in a water heater. With solar panels, a diode between the panels and batteries stops discharge at night.

Class 1 Division 2 controllers

Class 1 Division 2 rated controllers are made for hazardous locations such as offshore platforms and mining.

Popular choices

Need help choosing? Contact us and we will size the controller for your panels and battery bank.