Marine Inverters


93 products

A marine inverter turns battery power into 120V or 230V AC so you can run appliances, tools and electronics away from the dock. This collection covers pure sine wave and modified sine wave inverters and inverter chargers: Victron MultiPlus, MultiPlus-II, Quattro and Phoenix; Magnum MS, MMS, MM, RD and MSH series; Xantrex Freedom X, XC, SW and PROsine; Go Power; Schneider Conext XW; and Sol-Ark and UGE hybrid inverters for off-grid and home systems, from 200W up to 15kW.

How to choose a marine inverter

  • Continuous and surge watts: add up the loads that run at the same time, then allow for motor and compressor start-up surges.
  • Battery voltage: match the 12V, 24V or 48V input to your house bank.
  • Inverter or inverter charger: an inverter charger also charges batteries and switches to shore power automatically.
  • Waveform and certification: pure sine wave runs sensitive electronics; look for UL 458 or UL 1741 listings where required.

What size marine inverter do I need?

Size for your largest combined running load plus surge, and check that your battery bank and cabling can supply the DC current. Our inverter guide walks through the math.

Do I need special wiring for an inverter?

Yes. High DC currents need correctly sized cables and a fuse close to the battery. See our inverter wiring kits.

Do you carry Magnum inverter parts?

Yes. Replacement control boards, FET boards, AC boards, filter boards and fans for Magnum inverters are listed in this collection.

Have a Xantrex or Magnum inverter that needs testing? See our inverter repair service in Fort Lauderdale.

A marine inverter should be sized for the loads that run at the same time, not the sum of every appliance aboard. For a 12V boat with a microwave, coffee maker and chargers, a 2000W to 3000W pure sine inverter charger such as the Victron MultiPlus-II 12/3000 is the usual choice; it also charges the bank and transfers to shore power automatically. Check the UL 458 or UL 1741 listing, and budget for the DC side: a 3000W inverter on 12V can draw over 250A, so it needs properly sized cable and a fuse close to the battery. See our inverter wiring kits.